DIY: Install guide for OEM fogs... - Page 10

vortec7 · 11-11-2007, 01:51 AM

hi

I want to put my fog lights in HID 3000k i was wondering what type of bulb light i need before i order some.....i think its H11 but im not sure thanks

jf

tda1337 · 11-11-2007, 08:16 AM

depending on manufacturer of the housing, (aftermarket can have different) most are H11, the honda ones are H11, so that would be the bulb u need

vortec7 · 11-11-2007, 10:37 AM

ok thanks!

tda1337 · 11-11-2007, 09:00 PM

easiest thing to do, when i doubt, pull the bulb out, go to autozone, pepboys etc. and they will tell u, OR it will be printed on the bulb itself lol

linda! · 11-13-2007, 03:13 PM

where is the fog button located on an 08? i have a VSA button where your fog button is.

tda1337 · 11-13-2007, 05:12 PM

on all cars with VSA it is on the light control stem!

08Si_C · 11-17-2007, 01:21 AM

it is more easy with the 08. All you need to do is replace the light control system (stalk). I have done with my installation within 3 hours.

***07mugencivic*** · 11-17-2007, 01:27 AM

thats nice...good diy

BeEzZie27 · 11-18-2007, 06:13 PM

yeah i just bought the oem interior harness ($17) and the stalk/headlight swith($75) and it worked real fine.. avoiding all that b/s harness it came with=]

huy1224 · 11-23-2007, 11:21 PM

AHhh, can someone help me with directions on removing the green. white and blue connectors in the interior fusebox? I can't seem to get it off, and one of the clips broke on the green connector.. I think im doing it wrong~! Anyone else have trouble with it? TIA.

Ryan T · 11-24-2007, 11:59 AM

On the right side of each harness, you'll see those U-shaped white plastic levers. Those have to be gripped by the right edge and pulled back toward you. They'll POP, and then swivel up, allowing you to pull the harness out.

Ryan T · 11-24-2007, 12:00 PM

(Cant edit my post for some reason)
Also it might sound like you broke the clip but it probably isn't broken. They're in there really tight.

Firestrife · 11-24-2007, 04:02 PM

This guide is great, +rep got my k2motor fogs in without a hitch thanks to this guide.

SilverSedanDJVG · 11-24-2007, 04:21 PM

nice write-up

huy1224 · 11-25-2007, 12:11 PM

Quote:

Originally Posted by Ryan T

On the right side of each harness, you'll see those U-shaped white plastic levers. Those have to be gripped by the right edge and pulled back toward you. They'll POP, and then swivel up, allowing you to pull the harness out.

Thanks Ryan, I'll give it a try today. But looking further ahead at the directions, why do I have to pull out all 3 connectors when I will only be working on the white one?

tda1337 · 11-25-2007, 09:17 PM

neone try doing HIDs in these yet? also when u say dremel
what form of the dremel did u use
i gotta buy one neways, and i can get a 7.2v wireless for 15 bux.... but im not sure if thats gonna be powerful enough, what speed dremel and did u use corded or cordless?

Firestrife · 11-25-2007, 11:05 PM

Yea actually a couple of folks have put HID's in the fogs already. Talk to Maiku he did it. Its not tough if you find a spot to mount the ballast.

tda1337 · 11-25-2007, 11:14 PM

ok wat bout dremels, what ones have people been using? so i have an idea of how much to spend!

huy1224 · 11-26-2007, 11:17 AM

Thanks for this guide.. with the combination of this guide, the PDF file from collegehillshonda and helpful forum participants, my lights are now working! I'll post a pic when I get my camera fixed~! Thanks all~ Next project: HID Headlights!

tda1337 · 11-26-2007, 12:33 PM

neone who did this want to tell me what kind of dremel they used and whether or not they recommend it.....................................

11-11-2007, 01:51 AM	#181 (permalink)
vortec7 Junior Member Join Date: Apr 2007 Posts: 8 iTrader: 0 / 0%	fog hi I want to put my fog lights in HID 3000k i was wondering what type of bulb light i need before i order some.....i think its H11 but im not sure thanks jf

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/lighting/13214-diy-install-guide-oem-fogs.html
Posted By	For	Type	Date
ClickProtect	This thread	Refback	02-25-2008 05:51 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	02-19-2008 11:29 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	02-11-2008 05:20 AM
Lighting [Archive] - 8th Generation Honda Civic Forum	This thread	Refback	02-06-2008 02:45 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	01-21-2008 11:41 PM
DIY/install index - LOOK HERE BEFORE ASKING FOR A DIY - 8th Generation Honda Civic Forum	This thread	Refback	01-19-2008 11:59 PM
DIY: Install guide for OEM fogs... - Page 7 - 8th Generation Honda Civic Forum	This thread	Refback	01-16-2008 08:27 PM
DIY/install index - LOOK HERE BEFORE ASKING FOR A DIY - 8th Generation Honda Civic Forum	This thread	Refback	01-01-2008 08:48 PM
The Temple of VTEC - Honda and Acura Enthusiasts Online Forums > Civic > > Re: Fog light install	This thread	Refback	12-12-2007 06:18 PM
Fog lights install - Page 6 - 8th Generation Honda Civic Forum	This thread	Refback	12-09-2007 05:22 PM
8th Generation Honda Civic Forum	This thread	Refback	12-06-2007 11:54 AM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
XenonDepot HID Install Guide	unplugged	Lighting, H.I.D.'s, & Neon	79	02-04-2010 04:23 PM
DIY: Injen CAI install on R18 (lots of pics)	peliROJO	Engine	120	02-03-2010 02:27 AM
HID xenondepot install guide	webby	Lighting	59	01-28-2010 03:44 PM
2006 Civic Rear Speaker Install Guide	webby	Audio	22	08-28-2009 06:57 PM
DIY install of new head unit in sedan UK/AUS	aussiebuddha	I.C.E., Electrical, Security, & Navigation	4	04-04-2006 03:30 PM

11-11-2007, 08:16 AM	#182 (permalink)
tda1337 Senior Member Join Date: Oct 2007 Location: Waterbury, CT Posts: 1,642 Rick iTrader: 0 / 0%	depending on manufacturer of the housing, (aftermarket can have different) most are H11, the honda ones are H11, so that would be the bulb u need

11-11-2007, 10:37 AM	#183 (permalink)
vortec7 Junior Member Join Date: Apr 2007 Posts: 8 iTrader: 0 / 0%	ok thanks!

11-11-2007, 09:00 PM	#184 (permalink)
tda1337 Senior Member Join Date: Oct 2007 Location: Waterbury, CT Posts: 1,642 Rick iTrader: 0 / 0%	easiest thing to do, when i doubt, pull the bulb out, go to autozone, pepboys etc. and they will tell u, OR it will be printed on the bulb itself lol

11-13-2007, 03:13 PM	#185 (permalink)
linda! Member Member Join Date: Oct 2007 Location: boston. Posts: 51 linda iTrader: 0 / 0%	where is the fog button located on an 08? i have a VSA button where your fog button is.

11-13-2007, 05:12 PM	#186 (permalink)
tda1337 Senior Member Join Date: Oct 2007 Location: Waterbury, CT Posts: 1,642 Rick iTrader: 0 / 0%	on all cars with VSA it is on the light control stem!

11-17-2007, 01:21 AM	#187 (permalink)
08Si_C Senior Member Join Date: Oct 2007 Posts: 145 iTrader: 0 / 0%	it is more easy with the 08. All you need to do is replace the light control system (stalk). I have done with my installation within 3 hours.

11-18-2007, 06:13 PM	#189 (permalink)
BeEzZie27 Senior Member Join Date: Apr 2007 Location: Southside AtL,GA Posts: 138 Daniel iTrader: 0 / 0%	yeah i just bought the oem interior harness ($17) and the stalk/headlight swith($75) and it worked real fine.. avoiding all that b/s harness it came with=]

11-23-2007, 11:21 PM	#190 (permalink)
huy1224 Senior Member Join Date: Aug 2005 Posts: 149 iTrader: 0 / 0%	AHhh, can someone help me with directions on removing the green. white and blue connectors in the interior fusebox? I can't seem to get it off, and one of the clips broke on the green connector.. I think im doing it wrong~! Anyone else have trouble with it? TIA.

11-24-2007, 11:59 AM	#191 (permalink)
Ryan T Senior Member Join Date: Sep 2007 Location: South Florida Age: 26 Posts: 303 Ryan Trevisol iTrader: 0 / 0%	On the right side of each harness, you'll see those U-shaped white plastic levers. Those have to be gripped by the right edge and pulled back toward you. They'll POP, and then swivel up, allowing you to pull the harness out.

11-24-2007, 12:00 PM	#192 (permalink)
Ryan T Senior Member Join Date: Sep 2007 Location: South Florida Age: 26 Posts: 303 Ryan Trevisol iTrader: 0 / 0%	(Cant edit my post for some reason) Also it might sound like you broke the clip but it probably isn't broken. They're in there really tight.

11-24-2007, 04:02 PM	#193 (permalink)
Firestrife Senior Member Join Date: May 2007 Location: Vicinity of Gainesville, FL Posts: 4,892 Keenan iTrader: 16 / 100%	This guide is great, +rep got my k2motor fogs in without a hitch thanks to this guide.

11-24-2007, 04:21 PM	#194 (permalink)
SilverSedanDJVG Senior Member Join Date: Jun 2006 Location: Florida Age: 21 Posts: 452 iTrader: 0 / 0%	nice write-up

11-25-2007, 09:17 PM	#196 (permalink)
tda1337 Senior Member Join Date: Oct 2007 Location: Waterbury, CT Posts: 1,642 Rick iTrader: 0 / 0%	neone try doing HIDs in these yet? also when u say dremel what form of the dremel did u use i gotta buy one neways, and i can get a 7.2v wireless for 15 bux.... but im not sure if thats gonna be powerful enough, what speed dremel and did u use corded or cordless?

11-25-2007, 11:05 PM	#197 (permalink)
Firestrife Senior Member Join Date: May 2007 Location: Vicinity of Gainesville, FL Posts: 4,892 Keenan iTrader: 16 / 100%	Yea actually a couple of folks have put HID's in the fogs already. Talk to Maiku he did it. Its not tough if you find a spot to mount the ballast.

11-25-2007, 11:14 PM	#198 (permalink)
tda1337 Senior Member Join Date: Oct 2007 Location: Waterbury, CT Posts: 1,642 Rick iTrader: 0 / 0%	ok wat bout dremels, what ones have people been using? so i have an idea of how much to spend!

11-26-2007, 11:17 AM	#199 (permalink)
huy1224 Senior Member Join Date: Aug 2005 Posts: 149 iTrader: 0 / 0%	Thanks for this guide.. with the combination of this guide, the PDF file from collegehillshonda and helpful forum participants, my lights are now working! I'll post a pic when I get my camera fixed~! Thanks all~ Next project: HID Headlights!

11-26-2007, 12:33 PM	#200 (permalink)
tda1337 Senior Member Join Date: Oct 2007 Location: Waterbury, CT Posts: 1,642 Rick iTrader: 0 / 0%	neone who did this want to tell me what kind of dremel they used and whether or not they recommend it.....................................