To those who installed K2 fogs....

baz938 · 02-07-2007, 05:34 PM

Alrite so i ordered some fogs from ebay and jus got them in today and i have some questions on how to install them.. I kno to folow the college hills honda pdf but.....First question is how do i feed the wire from the engine bay to the inside of the car? also i kno im now supposed to have the blue and red wire but i have another wire that is a 4 pin connector and i dont know where it goes. Thanx for the help in advance....

***Zeuceone*** · 02-07-2007, 05:37 PM

check the DIY on this site.

strCIVIC · 02-07-2007, 05:39 PM

same here...wanna order those but i don't know about those wiring thing... does anybody have an aftermarket DIY for our civics??

baz938 · 02-07-2007, 05:43 PM

Quote:

Originally Posted by Zeuceone

check the DIY on this site.

I did but it wasnt very specific on how to pass it thru to the int and its for the OEM harness

strCIVIC · 02-07-2007, 05:49 PM

http://forums.clubsi.com/ubbthreads....te_id/1#import

baz938 · 02-07-2007, 05:53 PM

Quote:

Originally Posted by strCIVIC

http://forums.clubsi.com/ubbthreads....te_id/1#import

Thats the exact same one on this site.....thanx though

So ive been looking at it some more and are the two harnesses not supposed to be conected to each other? Is the harness ot the lights stays on the outside and then the other harnesss is on the inside and they dont conenct to each other?

strCIVIC · 02-07-2007, 06:14 PM

i believe they don't connect to each other...the harness for the fogs on the outside connects to the pin connector behind the washer fluid...and the harness for the interior connects to the wire underneath the steering wheel dash...

baz938 · 02-07-2007, 06:15 PM

ahhhhh i see i see...now its all starting to make sense lol

gbae007 · 02-07-2007, 06:26 PM

There is a wire that is factory-installed to be used for the fogs, running from the fuse area (inside) to behind the coolant reservior (behind the bumper).

That was confusing for me too.

02-07-2007, 05:34 PM	#1 (permalink)
baz938 Senior Member Join Date: Jun 2006 Location: Revere, Ma Age: 20 Posts: 441 iTrader: 0 / 0%	To those who installed K2 fogs.... Alrite so i ordered some fogs from ebay and jus got them in today and i have some questions on how to install them.. I kno to folow the college hills honda pdf but.....First question is how do i feed the wire from the engine bay to the inside of the car? also i kno im now supposed to have the blue and red wire but i have another wire that is a 4 pin connector and i dont know where it goes. Thanx for the help in advance....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Night pics with new fogs installed	civic4ever28	Introduction & Pictures	12	02-06-2007 12:50 AM
installed my fogs, and painted my calipers	qwerty :)	Introduction & Pictures	14	02-02-2007 01:27 PM
For those who installed Injen CAI and fogs....	1coole60530	Bolt-Ons And All-Motor	19	07-31-2006 01:52 PM
Fogs installed at factory...$600+?!?!?	OHSiGuy	Lighting, H.I.D.'s, & Neon	10	05-26-2006 10:27 AM

02-07-2007, 05:37 PM	#2 (permalink)
*Zeuceone* Kill Your Self Krew Join Date: Nov 2006 Location: Killa Cali. Posts: 52,444 iTrader: 25 / 100%	check the DIY on this site.

02-07-2007, 05:39 PM	#3 (permalink)
strCIVIC Senior Member Join Date: Apr 2006 Location: Oahu, Hawaii Age: 21 Posts: 2,275 iTrader: 0 / 0%	same here...wanna order those but i don't know about those wiring thing... does anybody have an aftermarket DIY for our civics??

02-07-2007, 05:49 PM	#5 (permalink)
strCIVIC Senior Member Join Date: Apr 2006 Location: Oahu, Hawaii Age: 21 Posts: 2,275 iTrader: 0 / 0%	http://forums.clubsi.com/ubbthreads....te_id/1#import

02-07-2007, 06:14 PM	#7 (permalink)
strCIVIC Senior Member Join Date: Apr 2006 Location: Oahu, Hawaii Age: 21 Posts: 2,275 iTrader: 0 / 0%	i believe they don't connect to each other...the harness for the fogs on the outside connects to the pin connector behind the washer fluid...and the harness for the interior connects to the wire underneath the steering wheel dash...

02-07-2007, 06:15 PM	#8 (permalink)
baz938 Senior Member Join Date: Jun 2006 Location: Revere, Ma Age: 20 Posts: 441 iTrader: 0 / 0%	ahhhhh i see i see...now its all starting to make sense lol

02-07-2007, 06:26 PM	#9 (permalink)
gbae007 Senior Member Join Date: Jun 2006 Location: Portland, Oregon Age: 27 Posts: 878 iTrader: 0 / 0%	There is a wire that is factory-installed to be used for the fogs, running from the fuse area (inside) to behind the coolant reservior (behind the bumper). That was confusing for me too.