Help Needed For a Retrofit!

AzNBiGBoI421 · 02-05-2009, 03:40 AM

Hey guys,

So i've recently decided that I definitely want to do a retrofit for my FA5. I am so confused about how to do this so any info would help. Basically I was wondering...

1. Can anyone give me a list of EVERYTHING I need to do the retrofit? (Like projectors,shrouds, etc.)

2. Does anyone know SOMEONE that can physically help me do this? (i'll obviously pay)

Please, any advice/info/tips would be great, thanks!

JohnnySak69 · 02-05-2009, 04:06 AM

1. Projectors, Shrouds, HID kit.

you are gonna need tools like...drills, nuts, bolts.

2. I'm in socal and i might sell my projectors so if you are interested, but its really not that hard.

AzNBiGBoI421 · 02-05-2009, 05:08 PM

Quote:

Originally Posted by JohnnySak69

1. Projectors, Shrouds, HID kit.

you are gonna need tools like...drills, nuts, bolts.

2. I'm in socal and i might sell my projectors so if you are interested, but its really not that hard.

Hey, do you have your own retrofit? If yes, we could swap headlights and I pay however much. Let me know.

***Exeon*** · 02-05-2009, 05:12 PM

you can read some info from my thread HID-Illusionz retrofit pics

AzNBiGBoI421 · 02-07-2009, 04:58 AM

Quote:

Originally Posted by Exeon

you can read some info from my thread HID-Illusionz retrofit pics

tnx man!

Carbonyl · 02-07-2009, 05:56 AM

its not that hard, it just seems scary because you're cutting into your headlight. All you have to do is cut the hole slowly until it fits the way you like it. Retrofitting for this car is a little harder than other cars cause you have to take into account the high beams as well, that's what I learned from my process. =\ Otherwise, heat gun or oven to take apart the head lights, dremel to cut the hold in the headlight housing. Jb weld and/or some screws to mount the projectors and shrouds and patience. Besides the D2S bulb and ballast which is the usual stuff.

Read up and good luck on the project.

AzNBiGBoI421 · 02-10-2009, 05:14 AM

Quote:

Originally Posted by Carbonyl

its not that hard, it just seems scary because you're cutting into your headlight. All you have to do is cut the hole slowly until it fits the way you like it. Retrofitting for this car is a little harder than other cars cause you have to take into account the high beams as well, that's what I learned from my process. =\ Otherwise, heat gun or oven to take apart the head lights, dremel to cut the hold in the headlight housing. Jb weld and/or some screws to mount the projectors and shrouds and patience. Besides the D2S bulb and ballast which is the usual stuff.

Read up and good luck on the project.

Thanks man, I think i'm going to find someone local who has experience with this. Let me know if you're available

AzNBiGBoI421 · 02-23-2009, 08:22 PM

Johnnysak69 is the best! Got my retrofit will take pics soon! Thanks again bro!

02-05-2009, 03:40 AM	#1 (permalink)
AzNBiGBoI421 Senior Member Join Date: Jul 2007 Location: Bay Area/Los Angeles Age: 22 Posts: 443	Help Needed For a Retrofit! Hey guys, So i've recently decided that I definitely want to do a retrofit for my FA5. I am so confused about how to do this so any info would help. Basically I was wondering... 1. Can anyone give me a list of EVERYTHING I need to do the retrofit? (Like projectors,shrouds, etc.) 2. Does anyone know SOMEONE that can physically help me do this? (i'll obviously pay) Please, any advice/info/tips would be great, thanks!
	Tweet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Retrofit Opinion(Other Retrofit owners please help!)	BlackSi10	Lighting, H.I.D.'s, & Neon	31	05-03-2011 06:26 PM
Retrofit	mkim115	Lighting, H.I.D.'s, & Neon	0	07-22-2008 11:10 PM
Retrofit	guell	Lighting, H.I.D.'s, & Neon	2	05-25-2008 08:57 PM
what is needed for retrofit?	garyward	Lighting, H.I.D.'s, & Neon	0	02-21-2007 09:28 PM
Civic Coupe EX and SI owners Help Needed!! connectors needed!!	PugManTerror	I.C.E., Electrical, Security, & Navigation	10	12-10-2006 09:44 PM

02-05-2009, 04:06 AM	#2 (permalink)
JohnnySak69 Senior Member Join Date: May 2008 Location: Huntington Beach, CA Posts: 149	1. Projectors, Shrouds, HID kit. you are gonna need tools like...drills, nuts, bolts. 2. I'm in socal and i might sell my projectors so if you are interested, but its really not that hard.

02-05-2009, 05:12 PM	#4 (permalink)
*Exeon* VIP Member Join Date: Mar 2006 Location: MN Posts: 6,051 asdfghjkl	you can read some info from my thread HID-Illusionz retrofit pics

02-07-2009, 05:56 AM	#6 (permalink)
Carbonyl Senior Member Join Date: Feb 2008 Location: Nor Cal, currently in So Cal Posts: 314	its not that hard, it just seems scary because you're cutting into your headlight. All you have to do is cut the hole slowly until it fits the way you like it. Retrofitting for this car is a little harder than other cars cause you have to take into account the high beams as well, that's what I learned from my process. =\ Otherwise, heat gun or oven to take apart the head lights, dremel to cut the hold in the headlight housing. Jb weld and/or some screws to mount the projectors and shrouds and patience. Besides the D2S bulb and ballast which is the usual stuff. Read up and good luck on the project.

02-23-2009, 08:22 PM	#8 (permalink)
AzNBiGBoI421 Senior Member Join Date: Jul 2007 Location: Bay Area/Los Angeles Age: 22 Posts: 443	Johnnysak69 is the best! Got my retrofit will take pics soon! Thanks again bro!

Remove Advertisements Sponsored Links
8th Generation Honda Civic Forum Advertisement