King Motorsports Project Vehicle & Test Car!!

eK24monster · 03-03-2009, 11:09 AM

Many of you have been asking for information on products and services that we offer that we have not been able to provide/ answer... those days are coming to an end!!

King Motorsports has secured a "project car" from American Honda and it should be showing up shortly. The plan is to test a series of products and services to help quantify gains for these individual parts as well as combinations. The project car will be completely stock.

As a teaser... King Motorsports will be leading in with some testing on a customer’s car that we had secured prior to American Honda approving our request for a project car. The customers car was dropped off last week for a baseline run and is extremely excited to be a part of this thread! Even though there may be some redundancy in these tests, we feel strongly about making good on or commitment to this customer.

Information on the customers car will come first (1st.) and then we will follow up with additional data on our car shortly after it arrives...

So stay seated and check back often!!

Rob~

Customers Car:
Completely Stock 2006 Civic Si Coupe w/ 9919 miles

--------------------------------------------------------------------------------------------------------------------------------------------

UPDATE 3-10-09

I have a bit of mixed news (good and bad).

The 65mm body we tested will not be sold. We tested the 65mm but after talking to the machinist in this mornings meeting (he does not read the forums) and telling him about the results, he said that we should stop advertising 65mm.

He said that one of the T/Bodies we did had to be chucked (thrown away) because it broke through to the bearings for the throttle shaft. He does not think it would be smart to continue to go for 65mm but rather land somewhere between 64-64.5mm.

I know that this info may cause question and/ or concern as to the validity of the claims we are making with these tests... so we will be testing another body, that will be consistent with the product sold, shortly.

The good thing is we wont be ruining throttle bodies and you wont have to machine your manifold for the ridge/ lip that is left if we had gone 65mm.

Sorry, it was an honest mistake. Lets cross our fingers and hope that the 64mm version does the same job!!

Rob~

--------------------------------------------------------------------------------------------------------------------------------------------

UPDATE 3-12-09

65mm Throttle body was tested again today and them swapped out for a back to back test against the 64mm version that we will ultimately be promoting and selling!! Check page 4 for the dyno graph.

--------------------------------------------------------------------------------------------------------------------------------------------

WeNoh NHBP FA5 · 03-03-2009, 11:26 AM

I can't wait to see what you guys got plan

UnlimitedSi · 03-03-2009, 11:34 AM

Subscribededed... eventhough I'm almost done tinkering with my Mugen.

Zeuceone · 03-03-2009, 11:38 AM

like what?

eK24monster · 03-03-2009, 11:41 AM

Here is the Baseline for the customers Completely Stock 2006 Si Coupe w/ 9919 miles...

BioHazard · 03-03-2009, 11:43 AM

190 HP, that is the first I've seen on a stock si. Usually 180-185........

depends on the dyno. What kind did you use?

eK24monster · 03-03-2009, 12:07 PM

This is one healthy 2006 Civic Si... let me tell ya. We have plenty of dynos that will support your claim so we know it's not the dyno. We have a Dynojet 224xLC and it is accurate, no smoke and mirrors.

Edit: This is the Customers Completely Stock Car not the King Project Car

WeNoh NHBP FA5 · 03-03-2009, 12:30 PM

Quote:

Originally Posted by eK24monster

This is one healthy 06 Si... let me tell ya. We have plenty of dynos that will support your claim so we know it's not the dyno. We have a Dynojet 224xLC and it is accurate, no smoke and mirrors.

Yup! Seen it up close and in action (the dyno) @ the BBQ/Dyno day

FA5VL · 03-03-2009, 12:58 PM

damn, good ass numbers for sure! i can't wait for updates!

MIKKOO · 03-03-2009, 07:15 PM

im in on it

***F-1 Si*** · 03-03-2009, 07:22 PM

I'm in info.

UnlimitedSi · 03-03-2009, 07:24 PM

Wow... that is odd. A completely stock 2006 donor car... hmm?

No stock intake or intake manifold mods? Spacers, gaskets, etc?

jdm free · 03-03-2009, 07:25 PM

damn. good baseline.

SI_K_Nguyen_IS · 03-03-2009, 10:08 PM

nice number with no mods?

eK24monster · 03-03-2009, 10:35 PM

Quote:

Originally Posted by UnlimitedSi

Wow... that is odd. A completely stock 2006 donor car... hmm?

No stock intake or intake manifold mods? Spacers, gaskets, etc?

If you re-read the original post you will catch an important detail...

Quote:

Originally Posted by eK24monster

Many of you have been asking for information on products and services that we offer that we have not been able to provide/ answer... those days are coming to an end!!

King Motorsports has secured a "project car" from American Honda and it should be showing up shortly. The plan is to test a series of products and services to help quantify gains for these individual parts as well as combinations. The project car will be completely stock.

As a teaser... King Motorsports will be leading in with some testing on a customer’s car that we had secured prior to American Honda approving our request for a project car. The customers car was dropped off last week for a baseline run and is extremely excited to be a part of this thread! Even though there may be some redundancy in these tests, we feel strongly about making good on or commitment to this customer.

Information on the customers car will come first (1st.) and then we will follow up with additional data on our car shortly after it arrives...

So stay seated and check back often!!

Rob~

Customers Car:
Completely Stock 2006 Civic Si Coupe w/ 9919 miles

o-hatch · 03-03-2009, 10:37 PM

I hope its the Civic Coupe 8th gen.! Man we need Parts for that car!

jdm free · 03-03-2009, 10:41 PM

Quote:

Originally Posted by o-hatch

I hope its the Civic Coupe 8th gen.! Man we need Parts for that car!

there was no 4dr si in 06 so yea its a coupe

UnlimitedSi · 03-04-2009, 01:07 AM

Quote:

Originally Posted by eK24monster

If you re-read the original post you will catch an important detail...

I hear you on the OP.

Quote:

Originally Posted by eK24monster

This is one healthy 06 Si... let me tell ya. We have plenty of dynos that will support your claim so we know it's not the dyno. We have a Dynojet 224xLC and it is accurate, no smoke and mirrors.

^^that comment made it seem as if it was a stock car. Looking forward to the updates, cheers.

eK24monster · 03-04-2009, 10:04 AM

Quote:

Originally Posted by UnlimitedSi

^^that comment made it seem as if it was a stock car. Looking forward to the updates, cheers.

Both cars, the customers and the one on the way from American Honda, are completely stock.

I guess I will edit the original post and spell things out more clearly to lessen the confusion.

Note: I can not continue with the thread if I'm going to have to keep repeating myself every third post... you guys will need to read, everything.

***F-1 Si*** · 03-06-2009, 07:33 PM

Interesting a picture of the 06 FG2 is up on the King site with a description of what they will be doing in round 1.

03-03-2009, 11:09 AM	#1 (permalink)
eK24monster Senior Member Join Date: Jan 2008 Location: Going Back 2 Cali Posts: 198 iTrader: 1 / 100%	King Motorsports Project Vehicle & Test Car!! Many of you have been asking for information on products and services that we offer that we have not been able to provide/ answer... those days are coming to an end!! King Motorsports has secured a "project car" from American Honda and it should be showing up shortly. The plan is to test a series of products and services to help quantify gains for these individual parts as well as combinations. The project car will be completely stock. As a teaser... King Motorsports will be leading in with some testing on a customer’s car that we had secured prior to American Honda approving our request for a project car. The customers car was dropped off last week for a baseline run and is extremely excited to be a part of this thread! Even though there may be some redundancy in these tests, we feel strongly about making good on or commitment to this customer. Information on the customers car will come first (1st.) and then we will follow up with additional data on our car shortly after it arrives... So stay seated and check back often!! Rob~ Customers Car: Completely Stock 2006 Civic Si Coupe w/ 9919 miles -------------------------------------------------------------------------------------------------------------------------------------------- UPDATE 3-10-09 I have a bit of mixed news (good and bad). The 65mm body we tested will not be sold. We tested the 65mm but after talking to the machinist in this mornings meeting (he does not read the forums) and telling him about the results, he said that we should stop advertising 65mm. He said that one of the T/Bodies we did had to be chucked (thrown away) because it broke through to the bearings for the throttle shaft. He does not think it would be smart to continue to go for 65mm but rather land somewhere between 64-64.5mm. I know that this info may cause question and/ or concern as to the validity of the claims we are making with these tests... so we will be testing another body, that will be consistent with the product sold, shortly. The good thing is we wont be ruining throttle bodies and you wont have to machine your manifold for the ridge/ lip that is left if we had gone 65mm. Sorry, it was an honest mistake. Lets cross our fingers and hope that the 64mm version does the same job!! Rob~ -------------------------------------------------------------------------------------------------------------------------------------------- UPDATE 3-12-09 65mm Throttle body was tested again today and them swapped out for a back to back test against the 64mm version that we will ultimately be promoting and selling!! Check page 4 for the dyno graph. -------------------------------------------------------------------------------------------------------------------------------------------- Last edited by eK24monster; 03-04-2009 at 10:20 AM. Reason: Added info to reduce confusion

03-03-2009, 11:41 AM	#5 (permalink)
eK24monster Senior Member Join Date: Jan 2008 Location: Going Back 2 Cali Posts: 198 iTrader: 1 / 100%	Here is the Baseline for the customers Completely Stock 2006 Si Coupe w/ 9919 miles... Last edited by eK24monster; 03-04-2009 at 10:22 AM. Reason: Added info to reduce confusion

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
King Motorsports FG Meet	Civic_Sista	Mid-West	11	06-28-2009 06:59 PM
King Motorsports Dyno Day	06si	Mid-West	11	09-20-2008 11:47 PM
A Note From King Motorsports	Scott@Kingmotorsports	King Motorsports Unlimited	13	02-01-2008 12:03 AM
KING MOTORSPORTS: My experience	2fast4u2	Garage	47	09-28-2006 05:03 PM

Remove Advertisements Sponsored Links
8th Civic Advertisement

03-03-2009, 11:26 AM	#2 (permalink)
WeNoh NHBP FA5 Senior Member Join Date: Oct 2007 Posts: 15,223 Vino iTrader: 10 / 100%	I can't wait to see what you guys got plan

03-03-2009, 11:34 AM	#3 (permalink)
UnlimitedSi Senior Member Join Date: Nov 2007 Location: Gwinnett-Georgia Posts: 2,417 iTrader: 0 / 0%	Subscribededed... eventhough I'm almost done tinkering with my Mugen.

03-03-2009, 11:38 AM	#4 (permalink)
Zeuceone Senior Member Join Date: Nov 2006 Age: 13 Posts: 98,070 iTrader: 50 / 100%	like what?

03-03-2009, 11:43 AM	#6 (permalink)
BioHazard Senior Member Join Date: Jun 2008 Location: A pond in Duckville Age: 8 Posts: 7,768 Joo Know Me iTrader: 2 / 100%	190 HP, that is the first I've seen on a stock si. Usually 180-185........ depends on the dyno. What kind did you use?

03-03-2009, 12:07 PM	#7 (permalink)
eK24monster Senior Member Join Date: Jan 2008 Location: Going Back 2 Cali Posts: 198 iTrader: 1 / 100%	This is one healthy 2006 Civic Si... let me tell ya. We have plenty of dynos that will support your claim so we know it's not the dyno. We have a Dynojet 224xLC and it is accurate, no smoke and mirrors. Edit: This is the Customers Completely Stock Car not the King Project Car

03-03-2009, 12:58 PM	#9 (permalink)
FA5VL Senior Member Join Date: Apr 2008 Location: 9K RPM Pull: http://www.youtube.com/watch?v=4x9_LwXGwmg Posts: 3,165 8TH civic hmong crew/TWFA5CREW iTrader: 11 / 100%	damn, good ass numbers for sure! i can't wait for updates!

03-03-2009, 07:15 PM	#10 (permalink)
MIKKOO Senior Member Join Date: Mar 2008 Location: The CITY Posts: 1,920 MIKKO is HELLA SF iTrader: 2 / 100%	im in on it

03-03-2009, 07:22 PM	#11 (permalink)
*F-1 Si* VIP Member Join Date: Feb 2007 Location: NJ Posts: 2,582 Peter iTrader: 1 / 100%	I'm in info.

03-03-2009, 07:24 PM	#12 (permalink)
UnlimitedSi Senior Member Join Date: Nov 2007 Location: Gwinnett-Georgia Posts: 2,417 iTrader: 0 / 0%	Wow... that is odd. A completely stock 2006 donor car... hmm? No stock intake or intake manifold mods? Spacers, gaskets, etc?

03-03-2009, 07:25 PM	#13 (permalink)
jdm free Senior Member Join Date: May 2008 Location: philly burbs Posts: 3,261 AJ iTrader: 5 / 100%	damn. good baseline.

03-03-2009, 10:08 PM	#14 (permalink)
SI_K_Nguyen_IS Senior Member Join Date: Jul 2008 Posts: 185 iTrader: 0 / 0%	nice number with no mods?

03-03-2009, 10:37 PM	#16 (permalink)
o-hatch Senior Member Join Date: Oct 2007 Location: MoToRCity Posts: 1,193 SiR iTrader: 0 / 0%	I hope its the Civic Coupe 8th gen.! Man we need Parts for that car!

03-06-2009, 07:33 PM	#20 (permalink)
*F-1 Si* VIP Member Join Date: Feb 2007 Location: NJ Posts: 2,582 Peter iTrader: 1 / 100%	Interesting a picture of the 06 FG2 is up on the King site with a description of what they will be doing in round 1.