HFP lip kit (SI Sedan vs Non-SI Sedan)

ElvaSoShexai · 11-12-2007, 03:03 PM

i've been told that the rear of the HFP lip kit for the SI and the Non-SI is different... what's different about it? so can i fit the rear SI lip kit on a non-SI?

reason is bcuz i got a fbp ex and apparently, fbp was only available on the si in the states...

edit: whoops.. i just realized i posted this in the wrong section

inyong1988 · 11-12-2007, 03:03 PM

they're all same.

***cderalow*** · 11-12-2007, 03:08 PM

Quote:

Originally Posted by inyong1988

they're all same.

Nope, the cutout on the Si version is more oval shaped, the regular HFP rear lip is circular shaped. This is to accommodate the oval shaped exhaust tip on the Si.

There's two different part numbers:

For Si: 08F03-SNX

Except Si: 08F03-SNA

Just like there's different parts for the MT/AT & Si HFP suspension kit.

illusionstwice · 11-12-2007, 03:10 PM

Quote:

Originally Posted by cderalow

Nope, the cutout on the Si version is more oval shaped, the regular HFP rear lip is circular shaped. This is to accommodate the oval shaped exhaust tip on the Si.

There's two different part numbers:

For Si: 08F03-SNX

Except Si: 08F03-SNA

Just like there's different parts for the MT/AT & Si HFP suspension kit.

Exactly. He beat me to it. problem solved

NavyFlip · 11-12-2007, 03:12 PM

yeah to that! people just don't know what they're talking about! they're two different styles, but they should fit the same. i rather get the Si version! just my 2 cents.

ElvaSoShexai · 11-12-2007, 03:13 PM

so... would the si one fit the non-si? or would i have to modify it a bit so cutout fits a circular exhaust tip?

***BlaqkAudio*** · 11-12-2007, 03:14 PM

Taking a look at the instructions, you have to take off the rear bumper on the Si to install the lip. The markings will also probably be different for where to drill holes.

***cderalow*** · 11-12-2007, 03:21 PM

Quote:

Originally Posted by ElvaSoShexai

so... would the si one fit the non-si? or would i have to modify it a bit so cutout fits a circular exhaust tip?

I would think the Si version would fit a non-Si, but the regular version would not fit the Si exhaust tip properly.

Granted, style wise, there's no difference in appearance as far as I can tell, just the one area near the exhaust tip being shaped appropriately to the corresponding exhausts.

Location for exhaust exit and height are the same, and general profile look the same.

11-12-2007, 03:03 PM	#1 (permalink)
ElvaSoShexai Senior Member Join Date: Sep 2006 Location: Toronto Posts: 140 iTrader: 0 / 0%	HFP lip kit (SI Sedan vs Non-SI Sedan) i've been told that the rear of the HFP lip kit for the SI and the Non-SI is different... what's different about it? so can i fit the rear SI lip kit on a non-SI? reason is bcuz i got a fbp ex and apparently, fbp was only available on the si in the states... edit: whoops.. i just realized i posted this in the wrong section Last edited by ElvaSoShexai; 11-12-2007 at 03:32 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can the sedan HFP rear lip fit coupe??	zspeedzkwy	Inside and Out	6	10-08-2007 12:42 AM
Where can i buy the HFP Lip Kit	Juss	Inside and Out	4	09-15-2007 01:20 AM
Cheapest place to get HFP lip kit?	asdf	Inside and Out	1	08-22-2007 03:06 PM
HFP lip kit paint quality	blue_dlb	Inside and Out	0	05-17-2007 11:17 PM
HFP Sedan Lip Kit?..	BubzSI	Inside and Out	3	03-19-2007 01:43 PM

11-12-2007, 03:03 PM	#2 (permalink)
inyong1988 Senior Member Join Date: Jun 2006 Location: VA Posts: 17,966 BIPPU iTrader: 41 / 98%	they're all same.

11-12-2007, 03:12 PM	#5 (permalink)
NavyFlip Senior Member Join Date: Mar 2007 Location: caliPORNia Posts: 813 Navy Flip iTrader: 4 / 100%	yeah to that! people just don't know what they're talking about! they're two different styles, but they should fit the same. i rather get the Si version! just my 2 cents.

11-12-2007, 03:13 PM	#6 (permalink)
ElvaSoShexai Senior Member Join Date: Sep 2006 Location: Toronto Posts: 140 iTrader: 0 / 0%	so... would the si one fit the non-si? or would i have to modify it a bit so cutout fits a circular exhaust tip?

11-12-2007, 03:14 PM	#7 (permalink)
*BlaqkAudio* The Slip Join Date: Oct 2007 Location: New Rochelle, NY / Stony Brook, NY Age: 18 Posts: 821 James iTrader: 2 / 100%	Taking a look at the instructions, you have to take off the rear bumper on the Si to install the lip. The markings will also probably be different for where to drill holes.