2006+ Honda Civic Interior Tear Down Guide

[jimlesoualon]

Hi guys i have a civic 2007 dx in canada and im looking to get armrest in it and fix it myself but i dont know how to remove the upper console from the console and i just whant to know if anybody know if the upper console come with the armrest kit

here is the link Honda Automotive Parts
if you guys can help me this will be appreciated.

[08_Civic]

there should be a DIY on here somewhere, you just gotta search it. Naw Mean?

2006+ Honda Civic Interior Tear Down Guide
There we go.

[daebeed0h]

thanks ^__^

[ahdo1987]

removing the dead pedal is easy even w/o the guide.
but any clues to reinstalling it?
it isn't reversible in the screws.

[slicknick1]

I have the 06 coupe and I SWEAR there's not a PIECE OF PLASTIC that DOESN'T say airbag on it. The a-pillars, the seats, the backseat armrests, the back pillars, EVERYTHING. Is there a special way to get these off without setting off the airbags? I looked in the pics but couldn't find any that referred to airbag pieces. ALSO, I'm trying to run a 0 gauge power wire through the bottom trim pieces but the trim piece doesn't seem to want to snap down over it. Has anyone else had this problem? Any suggestions?

[tda1337]

Originally Posted by slicknick1

I have the 06 coupe and I SWEAR there's not a PIECE OF PLASTIC that DOESN'T say airbag on it. The a-pillars, the seats, the backseat armrests, the back pillars, EVERYTHING. Is there a special way to get these off without setting off the airbags? I looked in the pics but couldn't find any that referred to airbag pieces. ALSO, I'm trying to run a 0 gauge power wire through the bottom trim pieces but the trim piece doesn't seem to want to snap down over it. Has anyone else had this problem? Any suggestions?

some people have had that problem with 0 gauge
i would suggest running thru the center console and under the carpet, a bit easier, it comes up quickly enough to shove your wire through and LOTS of room, just tie it off under there so it doesnt get in the way of the shifter

[wilsontieu]

Originally Posted by McKennr

How would you remove the seat cushion trim as opposed to the whole cushion?

Replacement part number: 82131-SVB-A41ZA
Replacement part description: COVER, RR. SEAT CUSHION TRIM *NH167L*

[wilsontieu]

^ won't let me edit, but I made a mistake in linking the wrong picture:

[fullracetom]

Anyone knows how to remove moonroof shutter???

[elpis]

hi guys i want to remove the pillar up the console ( side air bag ''courtine'' )

[slicknick1]

OK. I want to do the craziest thing. I want to take EVERYTHING out of the front end of my car (ALL of the front dash). I want to go all the way down to bare metal/firewall. I want to relocate my aftermarket alarm system to somewhere on the firewall but I also want to put down 2 layers of sound deadener first. Anybody know how to take EVERYTHING out? Thanks.

[FG2uner]

what about front seat removal?

[toucansam1203]

anything on taking the pillar covers off on either side of the windsheild?

[3lbsofluv]

I need your help. The chrome finish on my H emblem on the steering wheel faded and I want to replace it. How can I remove it? If not, can you advise me how to repair it? Thanks.

[tda1337]

as far as i know replace the WHOLE airbag cover
u can get it at a dealership, easy to remove as well

[3lbsofluv]

Thanks man... but i think i'll just buy a decal and put it on top of the emblem... i'll post the pic once i'm done

[FG2BoostCoupe]

nice information

[B MAN]

Originally Posted by FG2uner

what about front seat removal?

i believe its 4 bolts


for someone who knows for sure?

[kwonoh2]

Nice!!!

[tda1337]

Originally Posted by B MAN

i believe its 4 bolts


for someone who knows for sure?

correct, 4 bolts and an SRS connector on one side
another 4 bolts and a weight sensor connector on the other side