D.I.Y. - Gas Pedal Removal

jmelkerson · 10-09-2008, 11:12 PM

I wasn't sure where to post this but gas pedal removal is most likely part of a complete sound deadening/audio upgrade project so I put it here in I.C.E.
1. Disconnect electrical and remove 2 nuts.
2. Pull the assembly off the studs and flop it down onto the carpet.
3. Release the retaining clip while pulling up on the assembly as a whole.
4. Pat yourself on the back for removing your gas pedal without destroying, breaking, or losing any parts!

justbringit995 · 12-06-2010, 04:27 PM

would this be the same procedure for the si pedal u think?

jmelkerson · 02-15-2011, 10:13 PM

My guess is yes. The differences between the Si and other pedals is more materials and cosmetics than basic design.

n2imports · 03-28-2011, 05:04 AM

Quote:

Originally Posted by jmelkerson

I wasn't sure where to post this but gas pedal removal is most likely part of a complete sound deadening/audio upgrade project so I put it here in I.C.E.
1. Disconnect electrical and remove 2 nuts.
2. Pull the assembly off the studs and flop it down onto the carpet.
3. Release the retaining clip while pulling up on the assembly as a whole.
4. Pat yourself on the back for removing your gas pedal without destroying, breaking, or losing any parts!

My cars gas pedal broke from behind...I'am still looking for another replacement. I've been to 3 diff salvage yards local and almost every civic they had had the same problem as mine broken off the back tab. Is that a typical part to break easy? Does anyone know? And how hard was it to take it apart was it a pain?

06smurfeatr · 01-14-2012, 10:23 PM

thanks this helped out alot

10-09-2008, 11:12 PM	#1 (permalink)
jmelkerson Junior Member Join Date: Jan 2008 Location: Auburn, Alabama Posts: 22 John	D.I.Y. - Gas Pedal Removal I wasn't sure where to post this but gas pedal removal is most likely part of a complete sound deadening/audio upgrade project so I put it here in I.C.E. 1. Disconnect electrical and remove 2 nuts. 2. Pull the assembly off the studs and flop it down onto the carpet. 3. Release the retaining clip while pulling up on the assembly as a whole. 4. Pat yourself on the back for removing your gas pedal without destroying, breaking, or losing any parts! Attached Thumbnails Last edited by jmelkerson; 10-09-2008 at 11:23 PM.
	Tweet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help. Gas Pedal Removal	wnorthern	Do It Yourself Articles	13	10-09-2008 11:21 PM
Gas Pedal Removal - How?	knapp9	Do It Yourself Articles	2	05-04-2008 11:47 PM
gas pedal	NcSi	Mechanical Problems & Technical Chat	13	06-13-2007 06:07 PM
gas pedal lower than brake pedal?	theprodigy	Civic Coupe And Sedan	8	04-02-2007 11:15 PM
dead rest pedal removal. how?	truflip	Do It Yourself Articles	7	03-27-2007 02:01 AM

12-06-2010, 04:27 PM	#2 (permalink)
justbringit995 Junior Member Join Date: Jun 2009 Location: San Bernardino, CA Posts: 26 Michael	would this be the same procedure for the si pedal u think?

02-15-2011, 10:13 PM	#3 (permalink)
jmelkerson Junior Member Join Date: Jan 2008 Location: Auburn, Alabama Posts: 22 John	My guess is yes. The differences between the Si and other pedals is more materials and cosmetics than basic design.

01-14-2012, 10:23 PM	#5 (permalink)
06smurfeatr Member Join Date: Jul 2009 Location: La mesa Age: 29 Posts: 31 An	thanks this helped out alot

Remove Advertisements Sponsored Links
8th Generation Honda Civic Forum Advertisement