P2R Throttle Body Gasket & P2R Throttle Body Spacer

KDUB-FODATAZZ · 10-30-2007, 12:49 AM

HOW HARD OF AN INSTALL IS THIS? ON A ONE TO TEN SCALE? AND WOULD U RECCOMMEND THAT I JUST TAKE IT TO A SHOP?

se7engen_ride · 10-30-2007, 12:50 AM

its not that hard to install. use the search button and look for a DIY on installing a p2r TB spacer and gaskets.

seseoppa · 10-30-2007, 10:16 AM

^^ It's not that hard at all. Of course having the right tools make it easier.

NIGHTHAWKSI · 10-30-2007, 10:38 AM

with the correct tools you should be done in ~15 minutes

galaxygrey13 · 10-30-2007, 10:51 AM

I have no prior experience and I followed the DIY on here and completed it in about 20 minutes and ate my piece of cake in between there.

k20beast · 10-30-2007, 11:35 AM

its very easy to install...and i love mine

***dentrecords*** · 10-30-2007, 11:39 AM

Please take your caps lock key off.

From the site rules **Updated site rules-Please read**

5. Posting in all CAPS is forbidden. If the majority of a message is determined to be made up of CAPS it will be deleted and the user will be warned.

07AlBLKeX305 · 08-11-2009, 03:35 AM

is tbs also for automatic r18's??

Tongman · 08-11-2009, 04:33 AM

Very easy install on my Si...

Kakashi · 08-11-2009, 01:47 PM

Quote:

Originally Posted by 07AlBLKeX305

is tbs also for automatic r18's??

There is a different one for the R18.

karytas · 08-11-2009, 03:03 PM

It's not hard at all.....I just installed mine yesterday and it took about 40 mins....spent most of the time to take off nuts from studs(you'll know what i mean if you read DIYs).

md69holla · 05-04-2010, 11:14 PM

will a throttle body spacer even do anything

RuckerPark · 05-05-2010, 05:56 AM

supposedly it will increase 3-4hp.. but dont' quote me on this

md69holla · 05-05-2010, 07:57 AM

yes i read that, but can you actually notice a difference

sik20fan · 05-05-2010, 09:40 AM

i think you get a whooshing noise.. also you might have conflicts if paired with a CAI.. it might hit something

md69holla · 05-06-2010, 09:50 AM

yea but can you tell a difference driving wise?

Willie Mack · 05-06-2010, 10:14 AM

Coolant bypass and Napa 7777 Rad hose are prefered with this mod.

situner3 · 05-10-2010, 12:17 PM

Just did this over the weekend with my Injen Cai, Used the napa 7777 rad hose to make enough room for the cai to bolt back up with the tbs on. Wasn't too bad at all just had to wait forever for the car to get the air outta the lines.

11secDsM · 05-11-2010, 02:37 AM

Has anyone noticed a difference with the spacer? I taught that was for old school carb cars only?

C1v1CSI08 · 05-11-2010, 02:40 AM

nah no difference unless you dyno it. engine bling. you want mine? j/k

10-30-2007, 12:49 AM	#1 (permalink)
KDUB-FODATAZZ Member Join Date: Oct 2007 Location: So. Cal 805! Posts: 56 Mike	P2R Throttle Body Gasket & P2R Throttle Body Spacer HOW HARD OF AN INSTALL IS THIS? ON A ONE TO TEN SCALE? AND WOULD U RECCOMMEND THAT I JUST TAKE IT TO A SHOP?
	Tweet

10-30-2007, 10:38 AM	#4 (permalink)
NIGHTHAWKSI Senior Member Member Join Date: Nov 2006 Location: long island Age: 26 Posts: 14,726 Ian	with the correct tools you should be done in ~15 minutes Last edited by NIGHTHAWKSI; 10-30-2007 at 11:38 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
P2R Power Package: Intake Manifold Gasket, TB Gasket and TB Spacer	Excelerate	Excelerate Performance	211	07-11-2010 04:30 PM
P2R Throttle Body Spacer dyno with I/H/E??	k20z3civic	Intake & Spacer Discussion	39	06-18-2008 09:26 PM
p2r throttle body spacer	dnbsi	Intake & Spacer Discussion	1	10-24-2007 01:58 AM
P2r throttle body spacer problem	polgas07	CorSport	5	09-13-2007 11:38 PM

10-30-2007, 12:50 AM	#2 (permalink)
se7engen_ride Senior Member Join Date: Jul 2005 Location: Arkansas Age: 24 Posts: 1,133 John	its not that hard to install. use the search button and look for a DIY on installing a p2r TB spacer and gaskets.

10-30-2007, 10:16 AM	#3 (permalink)
seseoppa Senior Member Join Date: Apr 2007 Location: Columbus, OH Posts: 523 B	^^ It's not that hard at all. Of course having the right tools make it easier.

10-30-2007, 10:51 AM	#5 (permalink)
galaxygrey13 Senior Member Join Date: Jun 2007 Location: CPT/LA Posts: 81,130 Antonino B. B. Leyva	I have no prior experience and I followed the DIY on here and completed it in about 20 minutes and ate my piece of cake in between there.

10-30-2007, 11:35 AM	#6 (permalink)
k20beast Senior Member Join Date: Feb 2007 Location: San antonio TX Age: 22 Posts: 1,611 zack	its very easy to install...and i love mine

08-11-2009, 03:35 AM	#8 (permalink)
07AlBLKeX305 Senior Member Join Date: Jun 2009 Location: My yea me Posts: 2,090 8thFLcrew212/I<3DrivingSlow212	is tbs also for automatic r18's??

08-11-2009, 04:33 AM	#9 (permalink)
Tongman Senior Member Join Date: Jan 2008 Location: NorCal Age: 27 Posts: 1,525	Very easy install on my Si...

08-11-2009, 03:03 PM	#11 (permalink)
karytas Senior Member Join Date: Mar 2009 Location: Princeton, NJ Age: 31 Posts: 123	It's not hard at all.....I just installed mine yesterday and it took about 40 mins....spent most of the time to take off nuts from studs(you'll know what i mean if you read DIYs).

05-04-2010, 11:14 PM	#12 (permalink)
md69holla Senior Member Member Join Date: Apr 2010 Location: Boston Age: 22 Posts: 372 Mike	will a throttle body spacer even do anything

05-05-2010, 05:56 AM	#13 (permalink)
RuckerPark Member Join Date: Apr 2010 Location: San Francisco Posts: 59	supposedly it will increase 3-4hp.. but dont' quote me on this

05-05-2010, 07:57 AM	#14 (permalink)
md69holla Senior Member Member Join Date: Apr 2010 Location: Boston Age: 22 Posts: 372 Mike	yes i read that, but can you actually notice a difference

05-05-2010, 09:40 AM	#15 (permalink)
sik20fan Senior Member Join Date: May 2009 Posts: 1,240	i think you get a whooshing noise.. also you might have conflicts if paired with a CAI.. it might hit something

05-06-2010, 09:50 AM	#16 (permalink)
md69holla Senior Member Member Join Date: Apr 2010 Location: Boston Age: 22 Posts: 372 Mike	yea but can you tell a difference driving wise?

05-06-2010, 10:14 AM	#17 (permalink)
Willie Mack Senior Member Join Date: Dec 2008 Location: AMERICA! I will bleed on Old Glory to make sure the stripes stay red. Posts: 2,586 Willie Mack	Coolant bypass and Napa 7777 Rad hose are prefered with this mod.

05-10-2010, 12:17 PM	#18 (permalink)
situner3 Member Join Date: Nov 2007 Location: Frederick, MD Posts: 44 James	Just did this over the weekend with my Injen Cai, Used the napa 7777 rad hose to make enough room for the cai to bolt back up with the tbs on. Wasn't too bad at all just had to wait forever for the car to get the air outta the lines.

05-11-2010, 02:37 AM	#19 (permalink)
11secDsM Member Join Date: May 2008 Location: Newington, CT Posts: 47 Chrispy	Has anyone noticed a difference with the spacer? I taught that was for old school carb cars only?

05-11-2010, 02:40 AM	#20 (permalink)
C1v1CSI08 Senior Member Join Date: May 2009 Posts: 894	nah no difference unless you dyno it. engine bling. you want mine? j/k

Remove Advertisements Sponsored Links
8th Generation Honda Civic Forum Advertisement