P2R Throttle Body Spacer dyno with I/H/E??

k20z3civic · 07-19-2007, 02:08 PM

Does anyone with Intake, Header, Exhaust have dyno number before and after the throttle body spacer install?? I have only seen stock cars with the throttle body spacer, and they all pick up around 5whp... But I'm just trying to see if it will indeed pick up 5whp range if you have I/H/E already installed.

07-19-2007, 02:47 PM

Personally I think P2RG+P2RSPACER+P2RG is the same as putting on an aftermarket CAI... I would rather have the spacers with stock intake then just a plan ole CAI + P2R....

slostjoe · 07-19-2007, 02:49 PM

And bizzybear dynoed his. P2R TB Spacer Dyno

slostjoe · 07-19-2007, 03:02 PM

k20z3civic · 07-19-2007, 04:12 PM

So what your saying is if your civic makes

180whp with stock intake

It will make

185whp with stock intake and P2R spacer
185whp with CAI w/o P2R Spacer
185whp with CAI w/ P2R Spacer

So with this said the only gains are made using the stock intake system in conjunction with the spacer.... is this correct?

I just have yet to see any dyno's with this spacer and an aftermarket intake system

therra978 · 07-19-2007, 05:35 PM

what happenz if u put P2R with SRI?

slostjoe · 07-19-2007, 05:41 PM

See this is what i was saying there is so many opinions and way too many varibles it sucks

jsb03f · 07-19-2007, 05:59 PM

the spacer is probably getting heat soaked after the first run on the dyno, hence why no gains were seen in later pulls. Mabye with the special gaskets from corsport, on either side of spacer, it would eliminate this problem a little. Personally its an ok idea, but made of the wrong material.

slostjoe · 07-19-2007, 06:05 PM

True but i has been proven to work, and it's made from aluminium.

jsb03f · 07-19-2007, 06:10 PM

I was only addressing the issue of the dyno numbers. Yes, it works well, but for what its worth its seems that more complications and concerns are associated with the spacer, not to say that i wouldn't get it myself

How hot would you say the IM gets??

slostjoe · 07-19-2007, 07:00 PM

not sure but supposedly you can use that port on the TB spacer for you n2o nozzle

jsb03f · 07-19-2007, 07:59 PM

That would be the only + but its is too close to the IM anyway, some sort of guage mabye, but what I dont know. For those who have this did you notice any real world gains?

Hondacivicsi23 · 07-20-2007, 12:12 AM

Im getting the TB spacers and gaskets shortly. Ill do a dyno after I have I/RH/E

RANGERSi07 · 07-20-2007, 12:18 AM

From experience when your at the strip it doesnt matter it all gets heatsoaked

slostjoe · 07-20-2007, 08:50 AM

Heats soak is indeffinate it will always happen but what can ya do, it's the nature of the beast

or something like that lol.

RANGERSi07 · 07-20-2007, 09:23 AM

Quote:

Originally Posted by slostjoe

Heats soak is indeffinate it will always happen but what can ya do, it's the nature of the beast

or something like that lol.

If your serious a 10lb bag of ice

slostjoe · 07-20-2007, 09:29 AM

Yeah they should sell ice at the track hehe.

RANGERSi07 · 07-20-2007, 09:30 AM

I always ask the vendors for a couple cups of Ice and they dont seem to have a problem giving it to me.

slostjoe · 07-20-2007, 09:37 AM

Ill try that im actually going to the track tonight.

H2spencer07 · 07-20-2007, 11:14 AM

wel guys if u wanna get rid of heat soak theres a few things u can do.. 1, get a 22lb pound bad of ice, and make sure it covers your THROTTLE BODY....NOT just your intake mani! 2..get a computer duster can...and turn it upside down to realease frezzing cold C02, gently mist your engine bay and then get about 5 feet from your filter cone (cai) or pop open ur stock airbox and spray your filter tray....make sure ur not to close bc u can crack plastic with this stuff...and truely by far the most important, when ur in the staging laned make sure u put it in N and have freidns push u through the lanes...and when ur abour 4 cars away from racing, turn it on, and roll the windows up...yurn on the heater in your car as high as you can (yah youl b hot! but grab ur friken stones and ball up) the heater will take hot air from the bay and put it in your car, and lastly dont be a dumb a** and sit there and rev on people! keep it as cool as posible! lol hope this helps some people

07-19-2007, 02:08 PM	#1 (permalink)
k20z3civic Senior Member Join Date: May 2007 Location: Port St. Lucie, FL Age: 30 Posts: 106 Greg	P2R Throttle Body Spacer dyno with I/H/E?? Does anyone with Intake, Header, Exhaust have dyno number before and after the throttle body spacer install?? I have only seen stock cars with the throttle body spacer, and they all pick up around 5whp... But I'm just trying to see if it will indeed pick up 5whp range if you have I/H/E already installed.
	Tweet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/intake-spacer-discussion/48890-p2r-throttle-body-spacer-dyno-i-h-e.html
Posted By	For	Type	Date
P2R Throttle Body Spacer dyno with I/H/E?? - 8th Generation Honda Civic Forum	This thread	Refback	01-14-2008 06:31 PM
P2R Throttle Body Gasket & P2R Throttle Body Spacer - 8th Generation Honda Civic Forum	This thread	Refback	01-08-2008 08:24 PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spoon Venturi Throttle body	AJR-CoW	Intake & Spacer Discussion	205	02-10-2012 01:41 AM
keeping track ... mods + dyno numbers	sickyute	Bolt-Ons And All-Motor	129	07-13-2011 01:19 AM
P2R throttle body spacer info ... !!!!	sickyute	Intake & Spacer Discussion	69	05-20-2011 10:43 AM
P2r throttle body spacer problem	polgas07	CorSport	5	09-13-2007 11:38 PM
P2R Dyno Day ... results ... of interest to most	sickyute	Bolt-Ons And All-Motor	51	06-28-2007 07:38 PM

07-19-2007, 02:47 PM	#2 (permalink)
Nicholas Guest Posts: n/a	Personally I think P2RG+P2RSPACER+P2RG is the same as putting on an aftermarket CAI... I would rather have the spacers with stock intake then just a plan ole CAI + P2R....

07-19-2007, 02:49 PM	#3 (permalink)
slostjoe Senior Member Join Date: Apr 2007 Location: Springfield, MO Posts: 3,855 Skyler	And bizzybear dynoed his. P2R TB Spacer Dyno

07-19-2007, 03:02 PM	#4 (permalink)
slostjoe Senior Member Join Date: Apr 2007 Location: Springfield, MO Posts: 3,855 Skyler

07-19-2007, 04:12 PM	#5 (permalink)
k20z3civic Senior Member Join Date: May 2007 Location: Port St. Lucie, FL Age: 30 Posts: 106 Greg	So what your saying is if your civic makes 180whp with stock intake It will make 185whp with stock intake and P2R spacer 185whp with CAI w/o P2R Spacer 185whp with CAI w/ P2R Spacer So with this said the only gains are made using the stock intake system in conjunction with the spacer.... is this correct? I just have yet to see any dyno's with this spacer and an aftermarket intake system

07-19-2007, 05:35 PM	#6 (permalink)
therra978 Senior Member Join Date: Jun 2007 Location: Lowell, MA Age: 25 Posts: 1,018 Soy Sauce!	what happenz if u put P2R with SRI?

07-19-2007, 05:41 PM	#7 (permalink)
slostjoe Senior Member Join Date: Apr 2007 Location: Springfield, MO Posts: 3,855 Skyler	See this is what i was saying there is so many opinions and way too many varibles it sucks

07-19-2007, 05:59 PM	#8 (permalink)
jsb03f Senior Member Join Date: Feb 2007 Location: Boca Raton Posts: 1,085 Josh	the spacer is probably getting heat soaked after the first run on the dyno, hence why no gains were seen in later pulls. Mabye with the special gaskets from corsport, on either side of spacer, it would eliminate this problem a little. Personally its an ok idea, but made of the wrong material.

07-19-2007, 06:05 PM	#9 (permalink)
slostjoe Senior Member Join Date: Apr 2007 Location: Springfield, MO Posts: 3,855 Skyler	True but i has been proven to work, and it's made from aluminium.

07-19-2007, 06:10 PM	#10 (permalink)
jsb03f Senior Member Join Date: Feb 2007 Location: Boca Raton Posts: 1,085 Josh	I was only addressing the issue of the dyno numbers. Yes, it works well, but for what its worth its seems that more complications and concerns are associated with the spacer, not to say that i wouldn't get it myself How hot would you say the IM gets??

07-19-2007, 07:00 PM	#11 (permalink)
slostjoe Senior Member Join Date: Apr 2007 Location: Springfield, MO Posts: 3,855 Skyler	not sure but supposedly you can use that port on the TB spacer for you n2o nozzle

07-19-2007, 07:59 PM	#12 (permalink)
jsb03f Senior Member Join Date: Feb 2007 Location: Boca Raton Posts: 1,085 Josh	That would be the only + but its is too close to the IM anyway, some sort of guage mabye, but what I dont know. For those who have this did you notice any real world gains?

07-20-2007, 12:12 AM	#13 (permalink)
Hondacivicsi23 Senior Member Join Date: Jan 2007 Location: Orlando,Fl Posts: 1,859 Michael	Im getting the TB spacers and gaskets shortly. Ill do a dyno after I have I/RH/E

07-20-2007, 12:18 AM	#14 (permalink)
RANGERSi07 Senior Member Join Date: Dec 2006 Location: NC/CT/GA Posts: 500	From experience when your at the strip it doesnt matter it all gets heatsoaked

07-20-2007, 08:50 AM	#15 (permalink)
slostjoe Senior Member Join Date: Apr 2007 Location: Springfield, MO Posts: 3,855 Skyler	Heats soak is indeffinate it will always happen but what can ya do, it's the nature of the beast or something like that lol.

07-20-2007, 09:29 AM	#17 (permalink)
slostjoe Senior Member Join Date: Apr 2007 Location: Springfield, MO Posts: 3,855 Skyler	Yeah they should sell ice at the track hehe.

07-20-2007, 09:30 AM	#18 (permalink)
RANGERSi07 Senior Member Join Date: Dec 2006 Location: NC/CT/GA Posts: 500	I always ask the vendors for a couple cups of Ice and they dont seem to have a problem giving it to me.

07-20-2007, 09:37 AM	#19 (permalink)
slostjoe Senior Member Join Date: Apr 2007 Location: Springfield, MO Posts: 3,855 Skyler	Ill try that im actually going to the track tonight.

07-20-2007, 11:14 AM	#20 (permalink)
H2spencer07 Member Join Date: May 2007 Location: Mansfield, OH Posts: 49 Spencer M****	wel guys if u wanna get rid of heat soak theres a few things u can do.. 1, get a 22lb pound bad of ice, and make sure it covers your THROTTLE BODY....NOT just your intake mani! 2..get a computer duster can...and turn it upside down to realease frezzing cold C02, gently mist your engine bay and then get about 5 feet from your filter cone (cai) or pop open ur stock airbox and spray your filter tray....make sure ur not to close bc u can crack plastic with this stuff...and truely by far the most important, when ur in the staging laned make sure u put it in N and have freidns push u through the lanes...and when ur abour 4 cars away from racing, turn it on, and roll the windows up...yurn on the heater in your car as high as you can (yah youl b hot! but grab ur friken stones and ball up) the heater will take hot air from the bay and put it in your car, and lastly dont be a dumb a** and sit there and rev on people! keep it as cool as posible! lol hope this helps some people

Remove Advertisements Sponsored Links
8th Generation Honda Civic Forum Advertisement