Coupe Si (type R)

gods91gts · 05-11-2008, 01:34 PM

Hey, i was a previous owner of a 2003.5 mazdaspeed pro, not too long ago i bought a white si coupe, and i just become a new member to 8thcivic, and so far i've been reading all kinds of good threats you guys put up and thanks very much for them. i like to also let you guys know that my english isnt all that great so please excuse me if my grammar is terrible.

anyways i own a 06 si coupe and i've been lookin all over the place, talking to ppl, shops and mix matching part numbers between the sedan and coupe, for the reason in that i'm dying to find out if the FD2(type R) conversion can be done with the coupe, replacing fenders, hood, headlights and bumper, even tho the cars are very similar but i havent found anyone or heard of anyone that had it done on the coupe, i really would like to swap to FD2 if possible. thanks

Asif22 · 05-11-2008, 01:37 PM

I'm not sure but I think they are a little different. I'm sure fabricating it, it could fit but I'm pretty sure it's not a bolt of thing. I'm so pissed they don't have the coupe in japan

huanqi · 05-11-2008, 02:03 PM

i seriously dont think its worth the time and money to do something like that, in fact, i dont even think it'll look good. The design was made by Honda...and it goes with the flow of the body, Sedan has slightly bigger parts than the coupe...but everything flows correctly with its larger/longer body...if you put it on a sedan (even if you did find someone who would customize it for you)...it just wouldnt look nice, bottom line is, if your car is new...i would trade it for sedan, and do the conversion...with all the money you loose on the trade...i firmly believe its cheaper than fabricating and customizing it to fit on your coupe.

Tredd · 05-11-2008, 02:29 PM

i remember someone did the front conversion on the coupe, the front conversion is possible though. My friend at superauto bacs told me that they sold the front conversion and they had one with it on a coupe.

**Nomar06** · 05-11-2008, 02:34 PM

You can do it, its just going to be alot of work and $$$.

When Sickyute did the conversion on his sedan him and Bizzy bear lined up the fenders on Bizzy's coupe. It would fit but the feder did not line up at the the front of the door jam.

So Bizzy prettry much said that you would have to cut the JDM fender and the USDM fenders in half above the tire somewhere. Then do a bunch of body work and change all the other parts involving the conversion.

***solidust*** · 05-11-2008, 02:57 PM

it would look really boxy/big up front and really roundish in the back imo

gods91gts · 05-12-2008, 08:23 PM

yeah thats what i thought, i kinda had the idea that the fenders were going to be the biggest issue... even tho it looks close to me it wasnt close enough. but hell whats wron with the coupe, to me the coupe is more performance oriented than the sedan overall... (blah honda) the sedan gets all the goodies from what im seeing, all kinds of nice JDM accessories and they left the coupe with leftovers. same with accord

05-11-2008, 01:34 PM	#1 (permalink)
gods91gts Junior Member Join Date: May 2008 Location: NC Posts: 3 Jose iTrader: 0 / 0%	Coupe Si (type R) Hey, i was a previous owner of a 2003.5 mazdaspeed pro, not too long ago i bought a white si coupe, and i just become a new member to 8thcivic, and so far i've been reading all kinds of good threats you guys put up and thanks very much for them. i like to also let you guys know that my english isnt all that great so please excuse me if my grammar is terrible. anyways i own a 06 si coupe and i've been lookin all over the place, talking to ppl, shops and mix matching part numbers between the sedan and coupe, for the reason in that i'm dying to find out if the FD2(type R) conversion can be done with the coupe, replacing fenders, hood, headlights and bumper, even tho the cars are very similar but i havent found anyone or heard of anyone that had it done on the coupe, i really would like to swap to FD2 if possible. thanks

05-11-2008, 02:34 PM	#5 (permalink)
Nomar06 mmm...what a tasty burger Join Date: Jul 2006 Location: Charlotte, NC Age: 27 Posts: 21,184 iTrader: 4 / 100%	You can do it, its just going to be alot of work and $$$. When Sickyute did the conversion on his sedan him and Bizzy bear lined up the fenders on Bizzy's coupe. It would fit but the feder did not line up at the the front of the door jam. So Bizzy prettry much said that you would have to cut the JDM fender and the USDM fenders in half above the tire somewhere. Then do a bunch of body work and change all the other parts involving the conversion. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Concept type R bodykit for the coupe!	Civic Pride	Inside and Out	52	11-06-2007 12:11 AM
This a new type of coupe lip?	aki	Inside and Out	4	10-23-2007 11:11 PM
Type-r wing on a coupe?	coupe_de_grace	Civic SI	19	10-05-2007 09:02 AM
Type R coupe? (style)	el_ben2	Introduction & Pictures	81	08-18-2007 06:12 PM
Type R wheels on the r18 coupe	lightlypurified	Civic Coupe And Sedan	0	06-11-2007 10:41 PM

05-11-2008, 01:37 PM	#2 (permalink)
Asif22 Senior Member Join Date: Jul 2007 Location: United States Posts: 2,005 Mohamed El-Mubaslat iTrader: 0 / 0%	I'm not sure but I think they are a little different. I'm sure fabricating it, it could fit but I'm pretty sure it's not a bolt of thing. I'm so pissed they don't have the coupe in japan

05-11-2008, 02:03 PM	#3 (permalink)
huanqi Senior Member Join Date: Jun 2007 Location: Los Angeles Age: 18 Posts: 474 Huan iTrader: 1 / 100%	i seriously dont think its worth the time and money to do something like that, in fact, i dont even think it'll look good. The design was made by Honda...and it goes with the flow of the body, Sedan has slightly bigger parts than the coupe...but everything flows correctly with its larger/longer body...if you put it on a sedan (even if you did find someone who would customize it for you)...it just wouldnt look nice, bottom line is, if your car is new...i would trade it for sedan, and do the conversion...with all the money you loose on the trade...i firmly believe its cheaper than fabricating and customizing it to fit on your coupe.

05-11-2008, 02:29 PM	#4 (permalink)
Tredd Senior Member Join Date: Oct 2007 Location: Rowland Heights (So-Cal) Age: 18 Posts: 627 iTrader: 5 / 100%	i remember someone did the front conversion on the coupe, the front conversion is possible though. My friend at superauto bacs told me that they sold the front conversion and they had one with it on a coupe.

05-12-2008, 08:23 PM	#7 (permalink)
gods91gts Junior Member Join Date: May 2008 Location: NC Posts: 3 Jose iTrader: 0 / 0%	yeah thats what i thought, i kinda had the idea that the fenders were going to be the biggest issue... even tho it looks close to me it wasnt close enough. but hell whats wron with the coupe, to me the coupe is more performance oriented than the sedan overall... (blah honda) the sedan gets all the goodies from what im seeing, all kinds of nice JDM accessories and they left the coupe with leftovers. same with accord