JDM emblems: got the front, but what about the back?

***squidmaster*** · 12-02-2007, 12:33 AM

So today at the Kami Speed meet in Orlando FL I bought the front and rear JDM emblems. Took me like 20 minutes to install the front on and then I go to install the rear on and the guy gave me one for a DC5?!?! I go back in and talk to him and he tells me to just break off the pins. It's not even the same size WTF? Oh well what ever he did a return it was cool

but what do you guys think now?

and where is the cheapest place to get the rear emblem online?

***giantquesadilla*** · 12-02-2007, 12:38 AM

On another thread on this site, there are instructions for installing these. It says that they are slightly larger and you do need to break off the pins. Looks good though!

***SOLO8thGenSi*** · 12-02-2007, 01:03 AM

here's the link you requested @ the meet Jesse: *DIY* '07 Si 4DR JDM/red badges

DIY thread was created by me & then authenticated & stickied by a moderator. i was pleased. :)

hope that helps homie; even tho this is specific to the 4DR generally! selective color shot here looks GREAT btw!!

Xenin · 12-02-2007, 01:43 AM

apparently the front red H for an 02-03 EP3 CTR is a better size for the rear of our cars. still have to break off the 2 pins but there is double sided tape on it.

***squidmaster*** · 12-02-2007, 11:22 AM

Ohhh ok joey I thought you were saying that there was a specific badge with correct pins for the rear.... ok sweet

thanks for all the info guys!

***sgtpruitt*** · 12-02-2007, 11:31 AM

Quote:

Originally Posted by Xenin

apparently the front red H for an 02-03 EP3 CTR is a better size for the rear of our cars. still have to break off the 2 pins but there is double sided tape on it.

I did that too. It is a tad bit bigger and looks better

***squidmaster*** · 12-02-2007, 02:18 PM

but does it work for the coupe also because the coupe is kinda rounded.

***sgtpruitt*** · 12-02-2007, 02:56 PM

I have a coupe

***squidmaster*** · 12-02-2007, 03:03 PM

ok sweet making sure.

I saw it on JDMland for $35, is that price OK or should I keep looking around?

mix · 12-02-2007, 03:08 PM

so can anyone confirm a bigger emblem that fits the coupes for the rear

***squidmaster*** · 12-02-2007, 03:12 PM

I haven't been able to find one..... oh well.

actually
http://yhst-1408381693991.stores.yah...fg2ci06si.html

haven't found them separate I should say.

***sgtpruitt*** · 12-02-2007, 03:33 PM

I bought mine off ebay. The prices have raised since then but you can get them separately there.

The 02-03 ep3 front emblem is really close to the rear FG2 emblem in size. I have that emblem on my car right now.

***squidmaster*** · 12-02-2007, 03:45 PM

can you post a quick pick for us?

mix · 12-02-2007, 07:36 PM

Quote:

Originally Posted by sgtpruitt

I bought mine off ebay. The prices have raised since then but you can get them separately there.

The 02-03 ep3 front emblem is really close to the rear FG2 emblem in size. I have that emblem on my car right now.

so just to confirm this emblem fits flush on coupe's curved trunk?>??

***sgtpruitt*** · 12-02-2007, 07:42 PM

Quote:

Originally Posted by mix

so just to confirm this emblem fits flush on coupe's curved trunk?>??

Yes it does.

I can't take pics or I would. The camera's on a boat to the middle east right now.

02civicsi · 12-02-2007, 07:51 PM

I'm runnning the 04-05 EP3 CTR front emblem for the front & the 02-03 EP3 CTR front for the rear. The front one is almost a perfect match but the rear one is like 1/8th of an inch bigger. Yes, you do have to break off the pins.

***squidmaster*** · 12-02-2007, 08:20 PM

good info thanks guys!

02civicsi · 12-02-2007, 08:35 PM

Quote:

Originally Posted by squidmaster

I haven't been able to find one..... oh well.

actually
http://yhst-1408381693991.stores.yah...fg2ci06si.html

haven't found them separate I should say.

I'm curious to know how there are "JDM" FG2 emblems since there are no FG2's in the JDM market.

Call Showstoppers to order the red emblems separately.

***squidmaster*** · 12-02-2007, 09:41 PM

kinda off topic but I noticed that the JDM CTR has a redline of 8.5.... what engine is it running?

02civicsi · 12-02-2007, 10:04 PM

K20A

12-02-2007, 12:33 AM	#1 (permalink)
*squidmaster* VIP Member Join Date: Oct 2007 Location: Orlando, FL Posts: 4,448 Jesse iTrader: 2 / 100%	JDM emblems: got the front, but what about the back? So today at the Kami Speed meet in Orlando FL I bought the front and rear JDM emblems. Took me like 20 minutes to install the front on and then I go to install the rear on and the guy gave me one for a DC5?!?! I go back in and talk to him and he tells me to just break off the pins. It's not even the same size WTF? Oh well what ever he did a return it was cool but what do you guys think now? and where is the cheapest place to get the rear emblem online?

12-02-2007, 01:03 AM	#3 (permalink)
*SOLO8thGenSi* TW/RR polka-powerrr!! =] Join Date: Aug 2007 Location: Orlando, FL Age: 25 Posts: 6,046 Joey iTrader: 3 / 100%	here's the link you requested @ the meet Jesse: DIY '07 Si 4DR JDM/red badges DIY thread was created by me & then authenticated & stickied by a moderator. i was pleased. :) hope that helps homie; even tho this is specific to the 4DR generally! selective color shot here looks GREAT btw!! __________________ LOVE: RR 2007 Honda Civic Si Sedan (6-speed) /// SOLD: RR 2001 Honda Civic EX Coupe (5-speed) *...::HID²-tested, i-VTEC-approved, HFP-inspired, Mugen-over-obsessive::...*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dumb Laws	C2i0v0i1c	Water Cooler	58	10-03-2008 09:27 AM
Tein SS coilovers shock damper setting front and back	indus	Suspension and Brakes	8	06-25-2007 11:42 PM
conversion is done ...	sickyute	Introduction & Pictures	428	03-30-2007 11:30 PM

12-02-2007, 12:38 AM	#2 (permalink)
*giantquesadilla* GAS SIPPER Join Date: Nov 2007 Location: SoCal Posts: 284 Colby iTrader: 0 / 0%	On another thread on this site, there are instructions for installing these. It says that they are slightly larger and you do need to break off the pins. Looks good though!

12-02-2007, 01:43 AM	#4 (permalink)
Xenin Senior Member Join Date: Jun 2005 Location: Brampton Age: 25 Posts: 2,975 Captain Projectors iTrader: 2 / 100%	apparently the front red H for an 02-03 EP3 CTR is a better size for the rear of our cars. still have to break off the 2 pins but there is double sided tape on it.

12-02-2007, 11:22 AM	#5 (permalink)
*squidmaster* VIP Member Join Date: Oct 2007 Location: Orlando, FL Posts: 4,448 Jesse iTrader: 2 / 100%	Ohhh ok joey I thought you were saying that there was a specific badge with correct pins for the rear.... ok sweet thanks for all the info guys!

12-02-2007, 02:18 PM	#7 (permalink)
*squidmaster* VIP Member Join Date: Oct 2007 Location: Orlando, FL Posts: 4,448 Jesse iTrader: 2 / 100%	but does it work for the coupe also because the coupe is kinda rounded.

12-02-2007, 02:56 PM	#8 (permalink)
*sgtpruitt* VIP Member Join Date: May 2007 Location: Spooner Street Posts: 3,089 Tim iTrader: 7 / 100%	I have a coupe

12-02-2007, 03:03 PM	#9 (permalink)
*squidmaster* VIP Member Join Date: Oct 2007 Location: Orlando, FL Posts: 4,448 Jesse iTrader: 2 / 100%	ok sweet making sure. I saw it on JDMland for $35, is that price OK or should I keep looking around?

12-02-2007, 03:08 PM	#10 (permalink)
mix Senior Member Join Date: Mar 2006 Posts: 185 Chris iTrader: 0 / 0%	so can anyone confirm a bigger emblem that fits the coupes for the rear

12-02-2007, 03:12 PM	#11 (permalink)
*squidmaster* VIP Member Join Date: Oct 2007 Location: Orlando, FL Posts: 4,448 Jesse iTrader: 2 / 100%	I haven't been able to find one..... oh well. actually http://yhst-1408381693991.stores.yah...fg2ci06si.html haven't found them separate I should say.

12-02-2007, 03:33 PM	#12 (permalink)
*sgtpruitt* VIP Member Join Date: May 2007 Location: Spooner Street Posts: 3,089 Tim iTrader: 7 / 100%	I bought mine off ebay. The prices have raised since then but you can get them separately there. The 02-03 ep3 front emblem is really close to the rear FG2 emblem in size. I have that emblem on my car right now.

12-02-2007, 03:45 PM	#13 (permalink)
*squidmaster* VIP Member Join Date: Oct 2007 Location: Orlando, FL Posts: 4,448 Jesse iTrader: 2 / 100%	can you post a quick pick for us?

12-02-2007, 07:51 PM	#16 (permalink)
02civicsi Senior Member Join Date: Jan 2007 Location: Lonnngwoooood, FL Posts: 7,486 I am the Juggernaut!!! iTrader: 18 / 100%	I'm runnning the 04-05 EP3 CTR front emblem for the front & the 02-03 EP3 CTR front for the rear. The front one is almost a perfect match but the rear one is like 1/8th of an inch bigger. Yes, you do have to break off the pins.

12-02-2007, 08:20 PM	#17 (permalink)
*squidmaster* VIP Member Join Date: Oct 2007 Location: Orlando, FL Posts: 4,448 Jesse iTrader: 2 / 100%	good info thanks guys!

12-02-2007, 09:41 PM	#19 (permalink)
*squidmaster* VIP Member Join Date: Oct 2007 Location: Orlando, FL Posts: 4,448 Jesse iTrader: 2 / 100%	kinda off topic but I noticed that the JDM CTR has a redline of 8.5.... what engine is it running?

12-02-2007, 10:04 PM	#20 (permalink)
02civicsi Senior Member Join Date: Jan 2007 Location: Lonnngwoooood, FL Posts: 7,486 I am the Juggernaut!!! iTrader: 18 / 100%	K20A