Grillcraft Grill installed, add H or Si emblem?

Agnt004 · 11-04-2007, 11:01 PM

Just installed the top grillcraft grill this weekend, had the bottom on for a few months. I like the way it looks but I feel like its missing something. I am undecided whether to add an SI emblem in the center or put JDM Badge in the center with the SI emblem off centered. I made a couple of images using paint showing both options (yes I know they are bad chops, but bear with me, I'm using MS Paint

). What do you think looks better?

Original:

With H and Si emblem:

With Si emblem only:

JonLee · 11-04-2007, 11:03 PM

i think just the H would look cleanest imo...i really wish the grille had a frame

PhantomSi · 11-04-2007, 11:09 PM

yea im not really feelin that grill.

Civic Pride · 11-04-2007, 11:10 PM

Just the JDM H in the center..

honda_man12 · 11-05-2007, 12:05 AM

I like the way it looks now

b.rock · 11-05-2007, 12:11 AM

The grill looks nice IMO, however I think I would just put the Si symbol off-centered (to the right, like stock) and leave the H/JDM off entirely.

1chin3s3_b0i · 11-05-2007, 12:18 AM

just the H would look good

Gyro · 11-05-2007, 12:24 AM

Just the red "H"...or the off centered "si"...but not both.

taz1328 · 11-05-2007, 12:28 AM

I think just the "H" would look good

Asif22 · 11-11-2007, 05:18 PM

I always loved mesh grills, for some reason I don't like them on 8th gens

Cr8tive_leo · 11-11-2007, 05:39 PM

Don't mesh with me...

Either just the JDM in the middle or the SI on the side, not both, doesn't seem to work.

*I'd go clean if it was my ride, flat black, or even rubberized, lose the bottom grilles... but that's me.

*

**edit** And it probably looks hella better in person.

RJJensen · 11-11-2007, 06:38 PM

omg im lovin ur grille just as it is plain...so hot...will u do a diy for it?

BigMoney8481 · 11-11-2007, 09:50 PM

Si on the drivers side

***Mabuz*** · 11-12-2007, 08:51 AM

Quote:

Originally Posted by Asif22

I always loved mesh grills, for some reason I don't like them on 8th gens

Same here...it needs some type of trim around the opening maybe. Just the mesh looks incomplete...kinda like an FG-Michael Jackson nose job or something.

Jay Kincannon · 11-12-2007, 01:29 PM

Like the mesh. Don't care for any of your choices. Maybe something in chrome. What ever you decide on, I think it should be centered....JMHO

originalg00kster · 11-12-2007, 02:50 PM

why do you have chicken wire all over your front end?

Agnt004 · 11-12-2007, 04:12 PM

^^It is not chicken wire, it is a grillcraft grill, made from a piece of metal that is very hard to bend or twist and painted black. It will probably last longer than your stock grill.

11-04-2007, 11:01 PM	#1 (permalink)
Agnt004 Senior Member Join Date: May 2007 Location: South Florida Age: 22 Posts: 1,752 Greg iTrader: 4 / 100%	Grillcraft Grill installed, add H or Si emblem? Just installed the top grillcraft grill this weekend, had the bottom on for a few months. I like the way it looks but I feel like its missing something. I am undecided whether to add an SI emblem in the center or put JDM Badge in the center with the SI emblem off centered. I made a couple of images using paint showing both options (yes I know they are bad chops, but bear with me, I'm using MS Paint ). What do you think looks better? Original: With H and Si emblem: With Si emblem only:

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-04-2007, 11:03 PM	#2 (permalink)
JonLee Senior Member Join Date: Feb 2006 Location: SoCal Age: 19 Posts: 336 iTrader: 0 / 0%	i think just the H would look cleanest imo...i really wish the grille had a frame

11-04-2007, 11:09 PM	#3 (permalink)
PhantomSi Senior Member Join Date: Oct 2007 Location: Temple Terrace Age: 19 Posts: 594 WHOdata iTrader: 4 / 100%	yea im not really feelin that grill.

11-04-2007, 11:10 PM	#4 (permalink)
Civic Pride Senior Member Join Date: Mar 2006 Location: Brownsville,TN Age: 22 Posts: 4,101 iTrader: 5 / 100%	Just the JDM H in the center..

11-05-2007, 12:05 AM	#5 (permalink)
honda_man12 Senior Member Join Date: Mar 2007 Location: Toronto, ON Age: 21 Posts: 898 iTrader: 3 / 100%	I like the way it looks now

11-05-2007, 12:11 AM	#6 (permalink)
b.rock Senior Member Join Date: Oct 2007 Location: Calgz Posts: 289 Barry iTrader: 0 / 0%	The grill looks nice IMO, however I think I would just put the Si symbol off-centered (to the right, like stock) and leave the H/JDM off entirely.

11-05-2007, 12:18 AM	#7 (permalink)
1chin3s3_b0i Senior Member Join Date: Aug 2006 Location: East Vancouver Age: 23 Posts: 11,124 Michael iTrader: 2 / 100%	just the H would look good

11-05-2007, 12:24 AM	#8 (permalink)
Gyro Senior Member Join Date: May 2007 Location: Central Ohiya Posts: 134 James iTrader: 0 / 0%	Just the red "H"...or the off centered "si"...but not both.

11-05-2007, 12:28 AM	#9 (permalink)
taz1328 Senior Member Join Date: May 2007 Location: Massachusetts Age: 23 Posts: 147 Eric iTrader: 1 / 100%	I think just the "H" would look good

11-11-2007, 05:18 PM	#10 (permalink)
Asif22 Senior Member Join Date: Jul 2007 Location: United States Posts: 2,688 Mohamed El-Mubaslat iTrader: 0 / 0%	I always loved mesh grills, for some reason I don't like them on 8th gens

11-11-2007, 05:39 PM	#11 (permalink)
Cr8tive_leo Senior Member Join Date: Jan 2007 Location: Ontario, Canada Age: 40 Posts: 8,249 Adrian iTrader: 5 / 100%	Don't mesh with me... Either just the JDM in the middle or the SI on the side, not both, doesn't seem to work. I'd go clean if it was my ride, flat black, or even rubberized, lose the bottom grilles... but that's me. edit And it probably looks hella better in person.

11-11-2007, 06:38 PM	#12 (permalink)
RJJensen Senior Member Join Date: Apr 2007 Location: NJ Posts: 917 iTrader: 0 / 0%	omg im lovin ur grille just as it is plain...so hot...will u do a diy for it?

11-11-2007, 09:50 PM	#13 (permalink)
BigMoney8481 Senior Member Join Date: May 2007 Location: North Smithfield, RI Age: 19 Posts: 607 Randy iTrader: 1 / 100%	Si on the drivers side

11-12-2007, 01:29 PM	#15 (permalink)
Jay Kincannon Senior Member Join Date: Mar 2007 Posts: 934 iTrader: 2 / 100%	Like the mesh. Don't care for any of your choices. Maybe something in chrome. What ever you decide on, I think it should be centered....JMHO

11-12-2007, 02:50 PM	#16 (permalink)
originalg00kster Senior Member Join Date: Nov 2006 Posts: 307 iTrader: 1 / 100%	why do you have chicken wire all over your front end?

11-12-2007, 04:12 PM	#17 (permalink)
Agnt004 Senior Member Join Date: May 2007 Location: South Florida Age: 22 Posts: 1,752 Greg iTrader: 4 / 100%	^^It is not chicken wire, it is a grillcraft grill, made from a piece of metal that is very hard to bend or twist and painted black. It will probably last longer than your stock grill.