installing mugen visors?

xdanimals · 08-15-2007, 03:44 AM

hey guys i dont know if this is the right thread but does anyone know how to install the mugen visors cuz well i dont know how to read japanese and i just purchased the visors and i want to install them asap! so if anyone could help me out that would be GREAT

SOGO · 08-15-2007, 08:21 AM

Yours are the original ones with clips?

Where I come from the shop throws in the install for free. I don't really know how to describe it, but you're gonna have to pull out the rubber lining on the top side of your windows to fit the clips.

xdanimals · 08-15-2007, 12:05 PM

oooooooooh ic well yea i didnt buy it through a shop i ordered them from kingmotorsports and since i dont know how to read japanese thats why im asking on here

MarkyMark9982 · 08-15-2007, 12:25 PM

I like most of you can't read japanese either so I took mine to the local dealer. Took like 30 mins cost 30 bucks. I figured it was easier than me tearing my car apart.

SOGO · 08-15-2007, 04:10 PM

There should also be a pack of wipes in the box - I think they're soaked in isopropyl alcohol - to clean the areas of the doors where the tapes on the visors go on. May sound trivial, but I was pretty impressed that Mugen thought of that.

After fitting the visors on, do wipe them with some polymer-type car polish. The shop I got them from did that (yes, for free ... that's some service right there!) and the visors looked great.

Gaspar_06_Civic_EX · 08-15-2007, 05:03 PM

I never installed the clips...

xdanimals · 08-15-2007, 06:03 PM

niiice well im going to have one of the technicians at my work(crevier bmw) install it for me now since he said he knew how thanks for the advice guys

axdfa5t · 08-16-2007, 12:33 PM

do you know if the mugen visors have a mugen emblem on them?

SOGO · 08-16-2007, 12:50 PM

Quote:

Originally Posted by axdfa5t

do you know if the mugen visors have a mugen emblem on them?

The emblem is embossed on the underside of the rear passenger door visors.

thehov · 08-17-2007, 08:14 AM

hmmmmmm........... and what is that they do?

TommyD · 08-17-2007, 11:06 AM

Quote:

Originally Posted by thehov

hmmmmmm........... and what is that they do?

Make JDM fanbois cream their pants.

08-15-2007, 03:44 AM	#1 (permalink)
xdanimals Senior Member Join Date: Dec 2006 Location: LongBeach/Lakewood Age: 22 Posts: 462 iTrader: 2 / 100%	installing mugen visors? hey guys i dont know if this is the right thread but does anyone know how to install the mugen visors cuz well i dont know how to read japanese and i just purchased the visors and i want to install them asap! so if anyone could help me out that would be GREAT

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replica Mugen Visors FTW	Type_R_Nammer	Civic Coupe And Sedan	8	02-04-2007 09:20 PM
how to install the Mugen visors?	beerdude	Inside and Out	8	11-08-2006 01:18 PM
Mugen style window visors/ Door sill plates for SEDAN SEDAN	BattleEndless	Inside and Out	2	09-03-2006 03:21 AM

08-15-2007, 08:21 AM	#2 (permalink)
SOGO Member Join Date: Jun 2007 Posts: 54 iTrader: 0 / 0%	Yours are the original ones with clips? Where I come from the shop throws in the install for free. I don't really know how to describe it, but you're gonna have to pull out the rubber lining on the top side of your windows to fit the clips.

08-15-2007, 12:05 PM	#3 (permalink)
xdanimals Senior Member Join Date: Dec 2006 Location: LongBeach/Lakewood Age: 22 Posts: 462 iTrader: 2 / 100%	oooooooooh ic well yea i didnt buy it through a shop i ordered them from kingmotorsports and since i dont know how to read japanese thats why im asking on here

08-15-2007, 12:25 PM	#4 (permalink)
MarkyMark9982 Member Join Date: May 2007 Location: Pittsburgh, Shady Side Area Posts: 47 Mark iTrader: 0 / 0%	I like most of you can't read japanese either so I took mine to the local dealer. Took like 30 mins cost 30 bucks. I figured it was easier than me tearing my car apart.

08-15-2007, 04:10 PM	#5 (permalink)
SOGO Member Join Date: Jun 2007 Posts: 54 iTrader: 0 / 0%	There should also be a pack of wipes in the box - I think they're soaked in isopropyl alcohol - to clean the areas of the doors where the tapes on the visors go on. May sound trivial, but I was pretty impressed that Mugen thought of that. After fitting the visors on, do wipe them with some polymer-type car polish. The shop I got them from did that (yes, for free ... that's some service right there!) and the visors looked great.

08-15-2007, 05:03 PM	#6 (permalink)
Gaspar_06_Civic_EX Senior Member Join Date: Apr 2006 Location: Mass Age: 35 Posts: 1,173 Shawn iTrader: 0 / 0%	I never installed the clips...

08-15-2007, 06:03 PM	#7 (permalink)
xdanimals Senior Member Join Date: Dec 2006 Location: LongBeach/Lakewood Age: 22 Posts: 462 iTrader: 2 / 100%	niiice well im going to have one of the technicians at my work(crevier bmw) install it for me now since he said he knew how thanks for the advice guys

08-16-2007, 12:33 PM	#8 (permalink)
axdfa5t Senior Member Join Date: Jun 2007 Location: ORANGE COUNTY Posts: 117 iTrader: 0 / 0%	do you know if the mugen visors have a mugen emblem on them?

08-17-2007, 08:14 AM	#10 (permalink)
thehov Senior Member Join Date: Aug 2007 Location: East Coast Posts: 114 iTrader: 1 / 100%	hmmmmmm........... and what is that they do?