HELP pleases headlight tinting restore!!

paolo2k2 · 08-10-2007, 03:37 AM

hello i have tinted my headlights and tail lights and im afraid i have done them the wrong way...they are not shiny at all...i know i did it wrong as all i did was spray the vht night shades on...let it dry for 20 minutes then put a shot of clear coat..the clear coat has been on for 2 weeks and i was wondering if its possible at this stage to wet sand or buff it to a shine?

vey_z · 08-10-2007, 08:27 PM

Quote:

Originally Posted by paolo2k2

hello i have tinted my headlights and tail lights and im afraid i have done them the wrong way...they are not shiny at all...i know i did it wrong as all i did was spray the vht night shades on...let it dry for 20 minutes then put a shot of clear coat..the clear coat has been on for 2 weeks and i was wondering if its possible at this stage to wet sand or buff it to a shine?

It's not gonna be shiny if you used the spray thing. use overlay

Zeuceone · 08-10-2007, 08:28 PM

how does that help him?

Zeuceone · 08-10-2007, 08:31 PM

when i got tired of my tails tinted i sanded off the spray. first i used 600 sandpaper to remove most of the tint the i used 1000 to get rid of the final layer of tint. after that i used some rubbing compound to make it shiny again. make sure to tape off the area before sanding.

allancold42 · 08-10-2007, 11:15 PM

Quote:

Originally Posted by paolo2k2

hello i have tinted my headlights and tail lights and im afraid i have done them the wrong way...they are not shiny at all...i know i did it wrong as all i did was spray the vht night shades on...let it dry for 20 minutes then put a shot of clear coat..the clear coat has been on for 2 weeks and i was wondering if its possible at this stage to wet sand or buff it to a shine?

use andy's overylay...

check it out at bluebatmobile.net

paolo2k2 · 08-12-2007, 12:26 AM

yes i do not want to use overlays...i just want to make my spray clear coat shiny...i used vht nightshades and then i clearcoated it...i was wondering how to make the clear coat shine

***zippob09*** · 08-12-2007, 01:06 AM

buy new tail lights

Wakeboarder11 · 08-12-2007, 01:10 PM

i did the same thing as you and couldnt get them shiny. I ended up just taking them off and drenching them in laquer thinner and that took everything right off. Now i have overlays and i love them

si_civic · 08-13-2007, 01:21 PM

Eeeps. You've sprayed them? Wet sand + plastic? good luck.

(only a professional should attemp this.... cough... me)

drunknpanda · 08-13-2007, 01:22 PM

get some acidtone wouldnt that work?

drunknpanda · 08-13-2007, 01:24 PM

Quote:

Originally Posted by Wakeboarder11

drenching them in laquer thinner and that took everything right off.

***Blue Batmobile*** · 08-13-2007, 09:38 PM

Quote:

Originally Posted by Wakeboarder11

i did the same thing as you and couldnt get them shiny. I ended up just taking them off and drenching them in laquer thinner and that took everything right off. Now i have overlays and i love them

email me the pics Tyler

.

Bat™

08-10-2007, 03:37 AM	#1 (permalink)
paolo2k2 Senior Member Join Date: Mar 2007 Location: Edmonton Posts: 1,865 JPK	HELP pleases headlight tinting restore!! hello i have tinted my headlights and tail lights and im afraid i have done them the wrong way...they are not shiny at all...i know i did it wrong as all i did was spray the vht night shades on...let it dry for 20 minutes then put a shot of clear coat..the clear coat has been on for 2 weeks and i was wondering if its possible at this stage to wet sand or buff it to a shine?
	Tweet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: TSX projector retrofit 2	hoanger	Lighting, H.I.D.'s, & Neon	19	01-26-2009 07:25 PM
headlight tinting illegal or legal?	imtim25	Lighting, H.I.D.'s, & Neon	22	10-16-2007 08:24 PM
Car Tinting Question	newcivic1	Civic Coupe And Sedan	18	08-21-2007 09:40 PM
About projector headlight	zspeedzkwy	Lighting, H.I.D.'s, & Neon	16	02-01-2007 11:22 AM
Just got back from Autozone and was looking at blue headlight bulbs!	Civic Pride	Inside and Out	6	10-28-2006 10:07 AM

08-10-2007, 08:28 PM	#3 (permalink)
Zeuceone Senior Member Join Date: Nov 2006 Age: 14 Posts: 98,529	how does that help him?

08-10-2007, 08:31 PM	#4 (permalink)
Zeuceone Senior Member Join Date: Nov 2006 Age: 14 Posts: 98,529	when i got tired of my tails tinted i sanded off the spray. first i used 600 sandpaper to remove most of the tint the i used 1000 to get rid of the final layer of tint. after that i used some rubbing compound to make it shiny again. make sure to tape off the area before sanding.

08-12-2007, 12:26 AM	#6 (permalink)
paolo2k2 Senior Member Join Date: Mar 2007 Location: Edmonton Posts: 1,865 JPK	yes i do not want to use overlays...i just want to make my spray clear coat shiny...i used vht nightshades and then i clearcoated it...i was wondering how to make the clear coat shine

08-12-2007, 01:06 AM	#7 (permalink)
*zippob09* VIP Member Join Date: Mar 2007 Location: Boston Age: 26 Posts: 650 John	buy new tail lights

08-12-2007, 01:10 PM	#8 (permalink)
Wakeboarder11 Senior Member Join Date: Jun 2007 Location: Yorba Linda, CA Posts: 1,056 Tyler	i did the same thing as you and couldnt get them shiny. I ended up just taking them off and drenching them in laquer thinner and that took everything right off. Now i have overlays and i love them

08-13-2007, 01:21 PM	#9 (permalink)
si_civic Senior Member Join Date: Jul 2006 Location: B.C. ,Canada Age: 34 Posts: 4,612 A/Cst.D.F.Abate	Eeeps. You've sprayed them? Wet sand + plastic? good luck. (only a professional should attemp this.... cough... me)

08-13-2007, 01:22 PM	#10 (permalink)
drunknpanda Senior Member Join Date: Sep 2006 Location: Palmdale ,ca Posts: 346 Daniel	get some acidtone wouldnt that work?

Remove Advertisements Sponsored Links
8th Generation Honda Civic Forum Advertisement