Clearing Headlights Help!!! - Page 2

BlackMAMBA · 07-17-2007, 10:27 PM

I baked a friend of mine's Tiburon Headlights and that went pretty well, seemed liked the easy part, just had to be really quick.

For me though I'm scared about taking the bumper off, otherwise I would have done it on day 1.

ScottyGee · 07-17-2007, 10:53 PM

There is really nothing to taking off the bumper. I have done it 3 times now and I'll have to do it again next week when I get my intake back from Injen. The first time you will feel sort of squirrelly about doing it, but then you realize just how easy it is. You can totally do it. It's just a bunch of push tabs and some screws. It takes 10 minutes at the most.

07Civic21 · 07-19-2007, 11:35 PM

How exactly do all those push pins come out? I took out one from each inner fender well to put in my HIDs and broke them both.

***GETxERxDONE*** · 07-20-2007, 12:03 AM

theres a part on the inside of each to get a flathead screwdriver in. or a similiar tool then once you pop the center out the whole thing pulls out. but be aware of which ones you pull out because there are 2 different lengths

Power-Ivtec · 07-20-2007, 11:16 AM

The condensation is what worries me of doing it myself

***GETxERxDONE*** · 07-20-2007, 05:01 PM

just buy some new sealant, like maybe the stuff used for windshields, that should work

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CLEARING HEADLIGHTS (WITH PICS)	silverciv06	Lighting	500	10-10-2008 12:14 PM
Clearing Headlights	maximus20895	Lighting, H.I.D.'s, & Neon	10	08-01-2007 01:50 PM
clearing your headlights...legal???	gary79	Lighting, H.I.D.'s, & Neon	6	01-02-2007 11:35 AM

07-17-2007, 10:27 PM	#21 (permalink)
BlackMAMBA Senior Member Join Date: Jul 2007 Location: Weston, FL Age: 23 Posts: 510 David iTrader: 1 / 100%	I baked a friend of mine's Tiburon Headlights and that went pretty well, seemed liked the easy part, just had to be really quick. For me though I'm scared about taking the bumper off, otherwise I would have done it on day 1.

07-17-2007, 10:53 PM	#22 (permalink)
ScottyGee Member Join Date: Jun 2007 Posts: 83 iTrader: 2 / 100%	There is really nothing to taking off the bumper. I have done it 3 times now and I'll have to do it again next week when I get my intake back from Injen. The first time you will feel sort of squirrelly about doing it, but then you realize just how easy it is. You can totally do it. It's just a bunch of push tabs and some screws. It takes 10 minutes at the most.

07-19-2007, 11:35 PM	#23 (permalink)
07Civic21 Member Join Date: Apr 2007 Location: Cherry Hill, NJ Posts: 66 E. Mots. iTrader: 0 / 0%	How exactly do all those push pins come out? I took out one from each inner fender well to put in my HIDs and broke them both.

07-20-2007, 12:03 AM	#24 (permalink)
*GETxERxDONE* Dont Mess With This Zohan Join Date: Sep 2006 Location: Birmingham, Alabama Age: 22 Posts: 7,748 Nick iTrader: 3 / 100%	theres a part on the inside of each to get a flathead screwdriver in. or a similiar tool then once you pop the center out the whole thing pulls out. but be aware of which ones you pull out because there are 2 different lengths

07-20-2007, 11:16 AM	#25 (permalink)
Power-Ivtec Member Join Date: Jul 2006 Location: Coral Springs,Florida Age: 28 Posts: 39 iTrader: 0 / 0%	The condensation is what worries me of doing it myself

07-20-2007, 05:01 PM	#26 (permalink)
*GETxERxDONE* Dont Mess With This Zohan Join Date: Sep 2006 Location: Birmingham, Alabama Age: 22 Posts: 7,748 Nick iTrader: 3 / 100%	just buy some new sealant, like maybe the stuff used for windshields, that should work