official JDM emblem thread...

[jthoske]

Originally Posted by 07Ex

I just finished reading all posts in this thread and I still don't know which badges I need to get for the sedan. People are saying that the front is the same for coupe and sedan (EP3) but the rear for the sedan seems to be different. I just don't know which rear JDM emblem is the same size as the OEM one.

jdmland.com has a 07+ Si Sedan set for $87.97 + Shipping. I believe any set for the Sedan will have to be modified and applied with double sided adhesive, though....

[SOLO8thGenSi]

i ordered for my FA5 red badges (front & rear combo) from icbmotorsport/jdmland early last week sometime... ive heard NOTHING at all thru email, phone, whatever & still nadda in my mailbox.... but rest assured, my credit card has been charged.

what gives? any assistance or advice?? gettin' sorta worried here!


Wed Sep 5 20:24:44 PDT 2007
1 JDM FA Civic 06+ Sedan Front and Rear H Red H Combo 87.97
Subtotal: 87.97
Shipping: 13.75
Tax: 0.00
Total: 101.72

[CatScratched]

Originally Posted by 07Ex

I just finished reading all posts in this thread and I still don't know which badges I need to get for the sedan. People are saying that the front is the same for coupe and sedan (EP3) but the rear for the sedan seems to be different. I just don't know which rear JDM emblem is the same size as the OEM one.

I got these from gtmotoring.com:


The rear emblem has a curved backing plate with two tabs. It is attached by the same double sided foam adhesive that covers the back of the plate.

If you gently tug this foam adhesive, you can remove it and lay it aside. I broke the backing loose by dipping a knife in alcohol and slipping it between the badge and the backing plate until it came loose.

If you get these badges, make sure the badge is completely separated from the backing plate before you pull. I pulled apart too soon and damaged the foil.

As far as the font emblem goes, the tabs don't line up there either. Instead of breaking them, I drilled two new holes in the plastic on the grill. It ain't comin off.

I'll add some pics of all this work when I get a chance to resize them.

[SOLO8thGenSi]

okay, i re-read my confirmation email for the product purchase & it says to email them before calling with any questions or concerns.

typed up a nice easy email & sent to them. hopefully i hear a response. any1 else having issues with "decent" lengths of time for shipping/receipt?

[neph_04]

will the FA emblems fit my asian FD?

[Mrizzle84]

Originally Posted by SOLO8thGenSi

okay, i re-read my confirmation email for the product purchase & it says to email them before calling with any questions or concerns.

typed up a nice easy email & sent to them. hopefully i hear a response. any1 else having issues with "decent" lengths of time for shipping/receipt?

i ordered mine last monday from (jdmland.com) and wrote them on friday and got a response, well they are "out of stock" now so im a lil irritated. but hopefully ill get mine soon... im itching to put them on.

[CatScratched]

Originally Posted by neph_04

will the FA emblems fit my asian FD?

Technically, the ones I ordered didn't really "fit" my FA5. As far as the size of the emblems, the front was nearly exact, but the rear was 1/8 inch (6mm) smaller all around. It's stuck on there, though.

The fastenning posts are the things that don't fit. Some people break them off and use good foam back adhesive to fix the emblem.

As far as the front emblem, my guess is yes. But the back may be different...

[desailly]

Originally Posted by CatScratched

Technically, the ones I ordered didn't really "fit" my FA5. As far as the size of the emblems, the front was nearly exact, but the rear was 1/8 inch (6mm) smaller all around. It's stuck on there, though.

The fastenning posts are the things that don't fit. Some people break them off and use good foam back adhesive to fix the emblem.

As far as the front emblem, my guess is yes. But the back may be different...

is this the one that u ordered from gt motoring? JDM-FD2-CTR-RRREDH?
technically I own a honda city/fit aria from malaysia and the curved backing plate would fit perfectly onto my trunk. So would like to ask whether its the same one as the one u received. :) Thanks

[CatScratched]

Originally Posted by desailly

is this the one that u ordered from gt motoring? JDM-FD2-CTR-RRREDH?
technically I own a honda city/fit aria from malaysia and the curved backing plate would fit perfectly onto my trunk. So would like to ask whether its the same one as the one u received. :) Thanks

Yes, that's the one! I just checked the website to make sure.

It comes with a curved backing plate that I had to remove. I still have that plate if you'd like a pic for reference.

[cdubb77]

I'm glad I found this thread. I want to get just the rear emblem for my 4 door. I measured it today and I got 3" X 3 3/4"(inches) 95MM X 75MM.

[SOLO8thGenSi]

mine are on... here's 2 pics of front & rear. rallye red & type r badges ftw!!

[desailly]

rofl ... nice ... too much red for me though hehe

nice mugen gp rims...

Originally Posted by CatScratched

Yes, that's the one! I just checked the website to make sure.

It comes with a curved backing plate that I had to remove. I still have that plate if you'd like a pic for reference.

Thanks for the quick reply :) ill go make my order as soon as i get confirmation that they deliver to malaysia :)

[Mrizzle84]

Originally Posted by SOLO8thGenSi

[color="DarkRed"]mine are on... here's 2 pics of front & rear. rallye red & type r badges ftw!!

I just got my JDM emblems on... but....
DAYUM... now i gotta save up a bit and get the lip kit and fogs!!! Your sedan is sexy!!!!!!!!

[cdubb77]

I'll probably just get the rear red DC5 emblem. A lot of people say that if fits the 8th sedan.

Same price at this site below and at the ebay auction below it.
http://yhst-1408381693991.stores.yah...ndc5rered.html

http://cgi.ebay.com/ebaymotors/ws/eB...ksid=p3907.m29

This site has it too. More $ though.
http://passwordjdm.com/JDM-FA-06-Civ...P1811C190.aspx

[Mrizzle84]

got mine of JDMland.com got the coupe ones for 99.XX shipped.

Got pliers and twisted the pegs off and got heavy duty 3m pads and voila back was on. front just snapped the pegs off the stocker and put the front one on... took 10-15 min. total.

Look really good. decent price compared to all other sites.

[MRK20]

Taffey white is the way to go with jdm badges!

[SOLO8thGenSi]

Originally Posted by MRK20

Taffey white is the way to go with jdm badges!

agreed ^...soooooo sick lookin'... my buddy Mike here on 8thCivic just got them & its SO PIMP! badass contrast of color.

[MRK20]

Originally Posted by SOLO8thGenSi

agreed ^...soooooo sick lookin'... my buddy Mike here on 8thCivic just got them & its SO PIMP! badass contrast of color.

no lie!

[MRK20]

Originally Posted by SOLO8thGenSi

agreed ^...soooooo sick lookin'... my buddy Mike here on 8thCivic just got them & its SO PIMP! badass contrast of color.

you own that red Si?

[07mugencivic]

i can join now......