Password:JDM License Plate Re-Locator

[Skyline4life]

I know it says it dosnt fit our car..But would it look like rice?

This latest product from Password:JDM, the universal License Plate Re-locator(LPR), is by far the best thing there is on the market. Front license plates in stock locations are usually restrictive on airflow to the radiator and/or intercooler… that’s why you see so many cars without them. Kick that front plate off to one side and coolness is achieved. Like it or not, driving without a front license plate is illegal… you will get a citation, it’s only a matter of time. This re-locator kicks that front plate of yours off to one side giving you that sleek customized look often seen on kick-ass cars all over the world. The difference between this plate re-locator and everything else that is offered is that this one WORKS!

We engineered this product to fit both JDM and USDM license plates on nearly all vehicle applications. All the other ones out on the market will only fit JDM plates. Precision cut from T-5052 spec plate aluminum and then precisely bent on state of the art equipment, this plate re-locator is fully anodized black to withstand the harshest of weather. It comes complete with all the hardware you would need for a simple and clean install. Without any question, the Password:JDM license plate re-locator is the best thing there is.

This re-locator is available in both left and right side option. The choice is yours, please specify when ordering. Grab one today and get your car looking that much cleaner!!!

PHP Code:

Known Applications:(certain applications will require a different re-locator that is being designed)
EF(88-91 Civic/all models)     BB7(97-01 Prelude)
EG(92-95 Civic/all models)     ALL ACCORDS
EK(96-00 Civic/all models)     S13
DA(90-93 Integra/all models)     S14
DC(94-01 Integra US and JDM front ends)     S15
DC5(02+ RSX)     GDC
BB1(92-96 Prelude)     GDB 


Would it be rice? and do you think it could possibly fit our cars? (Si)

[skittleslegend]

Somebody else here DIY'd it on their NBP Si for less than, like $5 bucks or something. It's only rice if you think it looks like rice. Personally, I don't.

[articsilber323]

i would buy it in heart beat but my dealer drilled through my bumper to put the plate on

[Skyline4life]

Originally Posted by skittleslegend

Somebody else here DIY'd it on their NBP Si for less than, like $5 bucks or something. It's only rice if you think it looks like rice. Personally, I don't.

where the link? iv seen all the ones where its on the center..i like the look of it off to the side.

[skittleslegend]

I'll have to search for it, because I can't find it at the moment. Gimme a bit.

[jasonandre]

Whomever installs this, make sure your front plate is a picture of a tongue.

[skittleslegend]

Or you could put another plate on the other side.....buck teeth.

[BATANG CITY JAIL]

i can do this and i can be the dummy again..but our state dont required front license plate...

[Skyline4life]

Originally Posted by BATANG CITY JAIL

i can do this and i can be the dummy again..but our state dont required front license plate...

do it. then send me the mount for free haha

[BATANG CITY JAIL]

Originally Posted by Skyline4life

do it. then send me the mount for free haha

if you pay for it...

[Skyline4life]

Originally Posted by BATANG CITY JAIL

if you pay for it...

i'll pay with nudes :P haha

[jay3151]

i have this relocator kit from them for a while now:









i had a bodyshop install it when i did my sidemarkers installed

oh one last shot:

[BATANG CITY JAIL]

^^ oh there you go..that what it look like.

[Skyline4life]

Originally Posted by BATANG CITY JAIL

^^ oh there you go..that what it look like.

haha you lucked you :P

well waiting for AJP to getback to me on the exhaust i think the frame will come in spring.

[6spd VTEC]

Jay, so does the relocator fit for our cars? If so was there any drilling involved?

Skittles you think you can dig up that link for me cause I really want to do this

[jay3151]

Originally Posted by 6spd VTEC

Jay, so does the relocator fit for our cars? If so was there any drilling involved?

Skittles you think you can dig up that link for me cause I really want to do this

yeah it fits all u have to do is position the plate where u want it (i put it as far as i can go without blockin my fog too much which cleared perfectly) and then make sure there isnt anythin behind there like a clip for a foglight wire if so snap that off. once u have it and clears what u want to clear then mark the holes bend the grill fins slightly and drill your holes. the lil plate that comes w the kit goes behind the bumper over the drilled holes and then put the plate relocator on the other end and using the supplied bolts tighten. nothin to it best if u had ur bumper off. the guy who put it on for me did it since it was a small job and he was installin the sidemarkers. oh and the grill fins flex dont worry it wont break. when done make sure to reconnect the fog light wire clip if necessary.

[baskero]

would this work for the Canadian si's? or is it like drilled in?

[6spd VTEC]

thanks jay

[06CivEXJon]

I like the offset plate but what about if the dealer drilled a hole in my bumper for the licence plate holder? what should i do? get a new bumper or repaint mine?

[PoLiShPrInCe]

damn dealer drilled a hole in mine... im sol