What exactly do you need for a FD2 TYPE R rear conversion?

MIKKOO · 07-01-2009, 03:43 PM

i know you need trunk, tail lights, bumper, rear wing. but what other stuff like rubber molding screws etc.

cuzzybubba1 · 07-01-2009, 04:59 PM

The OP of this thread should be able to help you out.

FD2 conversion finally done

BRIANxJDM · 07-01-2009, 11:49 PM

you'll need the front end conversion which comes with everything even the emblem at streetlightz, you'll need the side skirt, rear bumper, and tail light, trunk, and wing and all the emblems for the rear. you can get this all at streetlightz! they all come with all the thing you'll need.

toeknee · 07-02-2009, 03:32 AM

Some dremmeling is required on the inner side of the trunk I believe, but is fairly simple and straight forward. there was a thread here somewhere talking about that lets see...

Harry · 07-02-2009, 04:11 AM

DIY: JDM rear end Conversion

07-01-2009, 03:43 PM	#1 (permalink)
MIKKOO Senior Member Join Date: Mar 2008 Location: The CITY Posts: 1,909 MIKKO is HELLA SF iTrader: 2 / 100%	What exactly do you need for a FD2 TYPE R rear conversion? i know you need trunk, tail lights, bumper, rear wing. but what other stuff like rubber molding screws etc.

07-02-2009, 03:32 AM	#4 (permalink)
toeknee Senior Member Join Date: May 2008 Location: Canuckstown Posts: 419 iTrader: 0 / 0%	Some dremmeling is required on the inner side of the trunk I believe, but is fairly simple and straight forward. there was a thread here somewhere talking about that lets see... Last edited by toeknee; 07-02-2009 at 03:33 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-01-2009, 04:59 PM	#2 (permalink)
cuzzybubba1 Senior Member Join Date: Jan 2009 Location: Central FL Age: 27 Posts: 4,912 Jason iTrader: 13 / 100%	The OP of this thread should be able to help you out. FD2 conversion finally done

07-01-2009, 11:49 PM	#3 (permalink)
BRIANxJDM Senior Member Join Date: Jan 2009 Location: SOCAL Age: 17 Posts: 1,931 Brian iTrader: 0 / 0%	you'll need the front end conversion which comes with everything even the emblem at streetlightz, you'll need the side skirt, rear bumper, and tail light, trunk, and wing and all the emblems for the rear. you can get this all at streetlightz! they all come with all the thing you'll need.

07-02-2009, 04:11 AM	#5 (permalink)
Harry Senior Member Join Date: Mar 2007 Location: Morgan Hill/San Jose Posts: 3,024 iTrader: 6 / 88%	DIY: JDM rear end Conversion