jdm emblem n00b question..

[08taffetawhite]

will the jdm type-r emblem for the coupe fit on the sedan,

recently purchased a front one but then later read i purchased one for an FG, but i have an FA.. i need to read the fine print next time

[boltuprite]

rumour has it the coupe and sedan ones are different sizes

[NIGHTHAWKSI]

Originally Posted by boltuprite

rumour has it the coupe and sedan ones are different sizes

i heard they are the same.

[Yodums]

They're actually the same, or should be anyways.

[boltuprite]

then why when you order from JDMland do they have a listing for coupe and a listing for sedan?

[darkrom]

Originally Posted by boltuprite

then why when you order from JDMland do they have a listing for coupe and a listing for sedan?

I think the front emblem is the same and the rear is SLIGHTLY different. Not 100% sure on that but apparently no one is.

[NIGHTHAWKSI]

Originally Posted by boltuprite

then why when you order from JDMland do they have a listing for coupe and a listing for sedan?

i dont see a lising for coupe on their site...

but beleive us..the ones they have listed for FA5 sedan will fit. JUST DONT ORDER THE FD2 REAR. it has en extra peice of trim on the back that wont allow it to fit USDM models.

[08taffetawhite]

thanks for the good info guys..

the one i ordered "for the coupe" should be coming in shortly so i'll post up how the fitment goes..

[boltuprite]

Originally Posted by NIGHTHAWKSI

i dont see a lising for coupe on their site...

but beleive us..the ones they have listed for FA5 sedan will fit. JUST DONT ORDER THE FD2 REAR. it has en extra peice of trim on the back that wont allow it to fit USDM models.

www.jdmland.com

The coupe one is 26 rows down in the last column - JDM FG2 Civic 06+ Si Coupe Front and Rear H Red H Combo

the sedan is 27 rows down in the first column - JDM FA5 Civic 06+ Si Sedan Front and Rear H Red H Combo

[NIGHTHAWKSI]

id say its the same....just advertised differently. same prices, same dimensions.

[Fudu]

now I have a N00B question about the JDM Emblems..is there a difference in size of the front one? I found one on Ebay and it says "JDM HONDA FD2-R RED H EMBLEM"
"SIZE H 3.61 inches W 4.53 inches" will this fit a seden grill.. thx =)

[NIGHTHAWKSI]

theFD2 front H will fit the front of either the coupe or sedan USDM civic.

[Fudu]

Alright sweet thanks! Time to buy then =D

[Fudu]

another stupid question...the back embelm there are two types the curved one and the flat one..which one fits... :S

it says *When the rear H installed in USDM 4Dr civic.
Processing is needed.not same rear H curve shape back. *

what on earth does that mean now! :S haha

[NIGHTHAWKSI]

dont get teh FD2 rear badge. it has a peice of plastic on teh back to form to the curve of teh JDm trunk...its different than the usdm trunk.
get the rear dc5 type r badge (integra)

[Fudu]

AH Ic ic, so would it be this one then

eBay Motors: JDM Red-H Rear Emblem RSX Integra DC5 02-06 FIT 06 07 (item 120297842912 end time Aug-31-08 00:07:09 PDT)

thx for the help man..sry for asking such n00b questions just getting the mod bug >_<

[NIGHTHAWKSI]

yea

[Fudu]

Sweet! ty ty! once i get a few customs done up I shall post pics =)

[Asakura Yoh]

Originally Posted by NIGHTHAWKSI

dont get teh FD2 rear badge. it has a peice of plastic on teh back to form to the curve of teh JDm trunk...its different than the usdm trunk.
get the rear dc5 type r badge (integra)

hmmm..would this not be smaller then the Honda badge? Also wont you still have to cut the pins to make it fit? The FA5 FG2 fits as well too! but need to cut the pins off, not too sure for the integra one ....

[lilrich027]

Originally Posted by boltuprite

www.jdmland.com

The coupe one is 26 rows down in the last column - JDM FG2 Civic 06+ Si Coupe Front and Rear H Red H Combo

the sedan is 27 rows down in the first column - JDM FA5 Civic 06+ Si Sedan Front and Rear H Red H Combo

so will these fit the lx models the same?the jdm site says SI only.im assuming that the lx uses the same size emblem?one size fits all coupes correct?