Si2Typ3R's HUGE Weekend Interior OVERHAUL.. (TONS OF PICS 56K FAILS)

Si2Typ3R · 07-16-2008, 01:48 AM

Okay so this past weekend I spent 36 hours with my old man overhauling my entire interior. So far everything is finished except the A&B Pillars which still need to be wrapped in the Gunmetal Psuedo Carbon Fiber Vinyl Fabric I have. This was a massive job that was packed into 2.5 days worth of time and I finished right before the rain came in.. Phew!... However.... I did suffer a nice hand wound in the process of staying on par with the deadline I set for us. I stabbed the $hit out of my hand with a heavy duty razor knife and missed the artery in my wrist by an inch.... No there are no pics so those with queezy stomachs have no fear!

Aside from bleeding and sweating my @$$ off in the heat this overhaul turned out awesome.

Special Thanks goes out to Nomar06 who posted the original idea for the rear coupe side panels. It turned out sick! well. no more chat... on with the pics.. Sorry for the blurry ones. I will update this thread with quality finished pics when the pillars are done/

Material List:

Headliner- 7.95 yrd X2= $16
Carpet- 14.95 yrd X2= $30
Tweed Fabric for doors- 29.95 yrd X1= $30
Duplicolor Black Enamel- $7 a can X4= $28
Duplicolor Automotive Clear Coat- $6 a can X3= $18

Total price *not including shipping for fabrics* $122

The Carpet

The Headliner

The Door Panel fabric

Trim out for paint prep (Red used to be in the car and FAILED bad lol)

More Trim

Prime Time

More Primer

Primer ready for finish coats

Final Coats

6.5" Konig Tuner 2s

Door Handle reinstalled

Shifter Base reinstalled with shift boot

And So the strip begins..

My shallow hull of existence

hmmmzzz, what to do with these

Moonroof modding

Almost bare

hmmmzzz, what to do with these...

Cut em

Fresh panel inserts using my tweed fabric

Perfect Fit

Almost...

This Fabric is top notch. I want to upholster my seats with it

Now, changed my mind on them holes

Thats much better

Nomar06... is effin brilliant

So niiice

Headliner time

Slide Roof measuring

Just about done...

Reinstalled

Carpet installed, everything put back in place

Temporary Floor Mats

Door Panels Back In

The other

Trim Reinstalled, need to tuck that carpet away by gas pedal..

Still need to tuck that away..

Thats teh sex

sidecut305 · 07-16-2008, 02:02 AM

sorry to hear about the hand, but looking forward to seeing the final project.

CarlinoSalazar · 07-16-2008, 02:06 AM

looking good. BTW what is that little round piece of trim?

MFDOOM44 · 07-16-2008, 02:10 AM

yea are those your rims? 8 inches? lol jp, i'm in for some more pictures

Si2Typ3R · 07-16-2008, 02:22 AM

Quote:

Originally Posted by CarlinoSalazar

looking good. BTW what is that little round piece of trim?

They were the speaker covers for my alpine 6.5" coaxials

Quote:

Originally Posted by MFDOOM44

yea are those your rims? 8 inches? lol jp, i'm in for some more pictures

Yup

Im all about weight reduction at all 4 corners

Quote:

Originally Posted by sidecut305

sorry to hear about the hand, but looking forward to seeing the final project.

Thanks, luckily I didn't need stitches... yet lol

Si2Typ3R · 07-16-2008, 02:23 AM

bump, updated with all current pics. will have more soon

dnv · 07-16-2008, 03:19 AM

Looks good!

KameraBoy · 07-16-2008, 03:31 AM

r u gonna paint those o snap bars and get something done about the part on the sunroof slider and the visors.

njk2086 · 07-16-2008, 03:39 AM

how much u want 4 those floor mats??

Zeuceone · 07-16-2008, 03:41 AM

not bad.

my08Si · 07-16-2008, 03:44 AM

wow nice!! great job!

cambodianricer · 07-16-2008, 03:45 AM

not bad

JoJo07FBPFG2 · 07-16-2008, 04:36 AM

nice nice... im going for the black headliner suede !!

kirks07si · 07-16-2008, 05:24 AM

looks good...why put in the new speaker covers then cover them in fabric though?

vingavina · 07-16-2008, 07:53 AM

great job

ryryninja · 07-16-2008, 07:57 AM

Didn't know u were capable of such things. lol.... Nice job

***Nomar06*** · 07-16-2008, 09:43 AM

Hotness!!! your gonna have to tell me where u got the red carpet from!!! What are you doing for the mats???

honda_man12 · 07-16-2008, 09:49 AM

tiiiiiiiight but you have to do something with the sunvisors and holy **** handles!

cecrazy03 · 07-16-2008, 10:00 AM

That looks awesome. You did a great job. I wish I had the patience and the skillz to do that on my own. I really want to do the door inserts.

***mattsbobo*** · 07-16-2008, 10:12 AM

Quote:

Originally Posted by honda_man12

tiiiiiiiight but you have to do something with the sunvisors and holy **** handles!

Awesome job bro!

I especially like your red speaker cover up front. "It really ties the room together".

07-16-2008, 01:48 AM	#1 (permalink)
Si2Typ3R Senior Member Join Date: Oct 2007 Location: D.C. Posts: 3,233 Nate	Si2Typ3R's HUGE Weekend Interior OVERHAUL.. (TONS OF PICS 56K FAILS) Okay so this past weekend I spent 36 hours with my old man overhauling my entire interior. So far everything is finished except the A&B Pillars which still need to be wrapped in the Gunmetal Psuedo Carbon Fiber Vinyl Fabric I have. This was a massive job that was packed into 2.5 days worth of time and I finished right before the rain came in.. Phew!... However.... I did suffer a nice hand wound in the process of staying on par with the deadline I set for us. I stabbed the $hit out of my hand with a heavy duty razor knife and missed the artery in my wrist by an inch.... No there are no pics so those with queezy stomachs have no fear! Aside from bleeding and sweating my @$$ off in the heat this overhaul turned out awesome. Special Thanks goes out to Nomar06 who posted the original idea for the rear coupe side panels. It turned out sick! well. no more chat... on with the pics.. Sorry for the blurry ones. I will update this thread with quality finished pics when the pillars are done/ Material List: Headliner- 7.95 yrd X2= $16 Carpet- 14.95 yrd X2= $30 Tweed Fabric for doors- 29.95 yrd X1= $30 Duplicolor Black Enamel- $7 a can X4= $28 Duplicolor Automotive Clear Coat- $6 a can X3= $18 Total price not including shipping for fabrics $122 The Carpet The Headliner The Door Panel fabric Trim out for paint prep (Red used to be in the car and FAILED bad lol) More Trim Prime Time More Primer Primer ready for finish coats Final Coats 6.5" Konig Tuner 2s Door Handle reinstalled Shifter Base reinstalled with shift boot And So the strip begins.. My shallow hull of existence hmmmzzz, what to do with these Moonroof modding Almost bare hmmmzzz, what to do with these... Cut em Fresh panel inserts using my tweed fabric Perfect Fit Almost... This Fabric is top notch. I want to upholster my seats with it Now, changed my mind on them holes Thats much better Nomar06... is effin brilliant So niiice Headliner time Slide Roof measuring Just about done... Reinstalled Carpet installed, everything put back in place Temporary Floor Mats Door Panels Back In The other Trim Reinstalled, need to tuck that carpet away by gas pedal.. Still need to tuck that away.. Thats teh sex Last edited by Si2Typ3R; 07-18-2008 at 08:59 AM.
	Tweet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Si2Typ3R's Interior PICS!	Si2Typ3R	Mid-Atlantic	2	02-06-2008 06:30 PM
Autocross Weekend -- tons of pics! (56k, go make a sammich)	zenith931	Introduction & Pictures	12	08-29-2007 09:24 AM
allow me to introduce myself...(56k next thread) tons of pics	Michael Bolton	Introduction & Pictures	13	11-16-2006 05:27 PM
5 months in the making TONS of pics+vids..56K HAHAHA	954K20_SI	Civic SI	25	06-30-2006 05:44 PM
5 months in the making TONS of pics+vids..56K HAHAHA	954K20_SI	Civic SI	0	06-02-2006 12:37 AM

07-16-2008, 02:02 AM	#2 (permalink)
sidecut305 Senior Member Join Date: Jul 2007 Location: Rochester, NY Age: 28 Posts: 391 FA Crew #81	sorry to hear about the hand, but looking forward to seeing the final project.

07-16-2008, 02:06 AM	#3 (permalink)
CarlinoSalazar Senior Member Join Date: Oct 2007 Location: College Park Age: 24 Posts: 1,416 Carlos	looking good. BTW what is that little round piece of trim?

07-16-2008, 02:10 AM	#4 (permalink)
MFDOOM44 Senior Member Join Date: Mar 2008 Location: Lynn, MA Age: 23 Posts: 1,016	yea are those your rims? 8 inches? lol jp, i'm in for some more pictures

07-16-2008, 02:23 AM	#6 (permalink)
Si2Typ3R Senior Member Join Date: Oct 2007 Location: D.C. Posts: 3,233 Nate	bump, updated with all current pics. will have more soon

07-16-2008, 03:19 AM	#7 (permalink)
dnv Senior Member Join Date: Oct 2007 Location: Socal Age: 24 Posts: 521	Looks good!

07-16-2008, 03:31 AM	#8 (permalink)
KameraBoy Senior Member Join Date: May 2007 Location: Destrehan, LA Age: 22 Posts: 4,516 Derek	r u gonna paint those o snap bars and get something done about the part on the sunroof slider and the visors.

07-16-2008, 03:39 AM	#9 (permalink)
njk2086 Senior Member Join Date: Sep 2007 Location: NJ Posts: 175 BryHI	how much u want 4 those floor mats??

07-16-2008, 03:41 AM	#10 (permalink)
Zeuceone Senior Member Join Date: Nov 2006 Age: 14 Posts: 98,529	not bad.

07-16-2008, 03:44 AM	#11 (permalink)
my08Si Senior Member Join Date: Nov 2007 Location: Torrance/Riverside, CA Posts: 1,778 Cliff	wow nice!! great job!

07-16-2008, 03:45 AM	#12 (permalink)
cambodianricer Senior Member Join Date: Dec 2007 Location: Riverside Posts: 16,756 JLee	not bad

07-16-2008, 04:36 AM	#13 (permalink)
JoJo07FBPFG2 Senior Member Join Date: Sep 2007 Location: 310 Age: 23 Posts: 662 k20jo	nice nice... im going for the black headliner suede !!

07-16-2008, 05:24 AM	#14 (permalink)
kirks07si Senior Member Join Date: Jul 2007 Location: University Heights, OH Posts: 1,332	looks good...why put in the new speaker covers then cover them in fabric though?

07-16-2008, 07:53 AM	#15 (permalink)
vingavina Senior Member Join Date: May 2006 Posts: 6,601	great job

07-16-2008, 07:57 AM	#16 (permalink)
ryryninja Senior Member Join Date: Jan 2006 Location: near an orange bridge Age: 26 Posts: 80,402 Ry [ the original mahfawker ]	Didn't know u were capable of such things. lol.... Nice job

07-16-2008, 09:49 AM	#18 (permalink)
honda_man12 Senior Member Join Date: Mar 2007 Location: Toronto, ON Age: 24 Posts: 1,172	tiiiiiiiight but you have to do something with the sunvisors and holy **** handles!

07-16-2008, 10:00 AM	#19 (permalink)
cecrazy03 Member Join Date: Aug 2007 Location: Winston-Salem, NC Posts: 65 Chad	That looks awesome. You did a great job. I wish I had the patience and the skillz to do that on my own. I really want to do the door inserts.

Remove Advertisements Sponsored Links
8th Generation Honda Civic Forum Advertisement