Secondary ECT Sensor

Pir8pete · 12-16-2011, 09:33 PM

under misc settings there's the option to enable or disable the secondary ECT sensor!

question;
what's the difference of having this enabled or disabled do?

complaint @ Hondata;
alot of these settings in the contents index do not have a proper explanation hondata ;/

Pir8pete · 01-07-2012, 05:19 PM

no one knows?

sofakingfresh · 01-07-2012, 05:33 PM

Its in there

FlashPro Help

***ruloSI*** · 01-07-2012, 08:31 PM

Use the primary instead of the 2ndary.

Best regards,

Dr. Rulo

Pir8pete · 01-07-2012, 09:28 PM

Quote:

Originally Posted by ruloSI

Use the primary instead of the 2ndary.

Best regards,

Dr. Rulo

ok, I thought it was only if you wanted to use that pin for something. What would be the difference of having it on or off?

sofakingfresh · 01-07-2012, 09:42 PM

yes im pretty sure you only disable it if you are using the pin for something else. if you look under radiator fan, by default the secondary is use for fan control. so if you do disable the secondary i would uncheck that box as well just in case it doesnt automatically switch it to the primary.

***ruloSI*** · 01-07-2012, 10:08 PM

I find that when that box is checked the car gets warmer, when it is unchecked the car stays between the "high and low" as delineated by your settings.

Best regards,

Dr. Rulo

12-16-2011, 09:33 PM	#1 (permalink)
Pir8pete Senior Member Join Date: Feb 2008 Location: Ottawa, C A N A D A Age: 34 Posts: 1,644	Secondary ECT Sensor under misc settings there's the option to enable or disable the secondary ECT sensor! question; what's the difference of having this enabled or disabled do? complaint @ Hondata; alot of these settings in the contents index do not have a proper explanation hondata ;/
	Tweet

01-07-2012, 08:31 PM	#4 (permalink)
*ruloSI* E-Tunez FTT!!! Join Date: Nov 2008 Location: Allentown PA Age: 36 Posts: 1,897 Rulo	Use the primary instead of the 2ndary. Best regards, Dr. Rulo __________________ Rulo\|K20/K24 Maven\|B-F-H-K-R Tuning Specialist www.e-tunez.com www.flashprotuning.com www.rpmnyc.com \| passion. dedication. *TUNATION.*

01-07-2012, 10:08 PM	#7 (permalink)
*ruloSI* E-Tunez FTT!!! Join Date: Nov 2008 Location: Allentown PA Age: 36 Posts: 1,897 Rulo	I find that when that box is checked the car gets warmer, when it is unchecked the car stays between the "high and low" as delineated by your settings. Best regards, Dr. Rulo __________________ Rulo\|K20/K24 Maven\|B-F-H-K-R Tuning Specialist www.e-tunez.com www.flashprotuning.com www.rpmnyc.com \| passion. dedication. *TUNATION.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
secondary O2 sensor	xyflz	Forced Induction And Nitrous	5	02-07-2010 10:20 AM
secondary o2 sensor???	grunt0351	Mechanical Problems & Technical Chat	3	11-03-2009 07:15 AM
Secondary O2 sensor Replacement	07 fuji Si	Mechanical Problems & Technical Chat	10	06-07-2009 01:36 AM
secondary 02 sensor	Dan1981	Mechanical Problems & Technical Chat	2	04-21-2009 08:14 PM

01-07-2012, 05:19 PM	#2 (permalink)
Pir8pete Senior Member Join Date: Feb 2008 Location: Ottawa, C A N A D A Age: 34 Posts: 1,644	no one knows?

01-07-2012, 05:33 PM	#3 (permalink)
sofakingfresh Senior Member Join Date: Jun 2011 Posts: 1,994	Its in there FlashPro Help

01-07-2012, 09:42 PM	#6 (permalink)
sofakingfresh Senior Member Join Date: Jun 2011 Posts: 1,994	yes im pretty sure you only disable it if you are using the pin for something else. if you look under radiator fan, by default the secondary is use for fan control. so if you do disable the secondary i would uncheck that box as well just in case it doesnt automatically switch it to the primary.

Remove Advertisements Sponsored Links
8th Generation Honda Civic Forum Advertisement