Okay so ive searched for awhile and have found several different answers, but not too sure which is correct. So my question is, what is a target AFR at part throttle for a n/a car. (I personally only have i/e/fp) My wot afr is perfect, but during part throttle/ daily driving its in between 14.5-14.7. Is this safe/average? Any advice or info would be greatly appreciated. Thanks 8th. :thumbsup:
unless you messed with the closed loop lambda target tables, it's going to target stoich (14.7 afr). check your s.trims and make sure you get them as close to 0 as possible.
Thanks for the help. my s.trim is good, its right where it needs to be. I was just second guessing myself about the part throttle afr. It turns out my afr are pretty well balanced. I actually need to dial in my wot afr, its at about 12.4-12.6 under 7500rpm. A little more tweaking and ill be good. Thanks again, hope this helps any other people with the same concerns..
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
8th Generation Honda Civic Forum
12M posts
157.4K members
Since 2005
We’re a community for 8th Gen 2006 - 2011 Civic owners to discuss performance mods, body kits, Si models, turbo kits and accessories. Come Join the club!