clearance issue

xxdynhamikxx · 03-31-2008, 11:10 PM

I'm gettin ready to pick up a Precision SC61 turbocharger for my Si. Do you think there will be clearance issues with that and the firewall? Cutting required? If so, what's the the largest turbo that can fit without having to cut into the firewall? Thanks for the info.

RJRacing · 03-31-2008, 11:33 PM

All of this is going to depend on the turbo exhaust manifold you will be running.

xxdynhamikxx · 03-31-2008, 11:54 PM

Oh yea sorry. Its the greddy style log manifold.

nightbear · 04-17-2008, 02:07 AM

sell your super charger and get a turbo

***boost1320*** · 04-17-2008, 12:20 PM

Quote:

Originally Posted by nightbear

sell your super charger and get a turbo

wtf are you talking about?

you shouldnt have any problem fitting that turbo back there especially with the greddy manifold. there is plenty of room to maybe even go bigger.

nightbear · 04-17-2008, 02:07 PM

Quote:

Originally Posted by boost1320

wtf are you talking about?

you shouldnt have any problem fitting that turbo back there especially with the greddy manifold. there is plenty of room to maybe even go bigger.

oh my bad i thought i read super charger lol

nightbear · 04-17-2008, 02:07 PM

in that case, u shouldnt have clearence issues its made to fit

***07CivicMD*** · 04-17-2008, 03:58 PM

SC61 should be fine and you could go as larger if you wanted to. PT6976E.

xxdynhamikxx · 04-27-2008, 03:17 PM

Cool thanks. Yea, I saw how much room was back there when I was trying to install my header.

enter801 · 04-27-2008, 07:59 PM

Do you have the Greddy kit already installed? I am about to get a different turbo charger since my Greddy turbo just flippin broke. It is leaking oil through teh exhaust housing and into my log manifold and exhaust ports.

xxdynhamikxx · 04-30-2008, 04:55 AM

Ew. Nah. I'm not installing anything until Kpro is finally released. I'm not settling for anything less. I'm getting so impatient. Almost to the point that I might sell out and get a Comptech SC. Then again, I can't see myself spending $3000+ for a part that doesnt have nearly the potential of a turbo.

03-31-2008, 11:10 PM	#1 (permalink)
xxdynhamikxx Member Join Date: Feb 2008 Posts: 86 iTrader: 0 / 0%	clearance issue I'm gettin ready to pick up a Precision SC61 turbocharger for my Si. Do you think there will be clearance issues with that and the firewall? Cutting required? If so, what's the the largest turbo that can fit without having to cut into the firewall? Thanks for the info.

04-17-2008, 03:58 PM	#8 (permalink)
*07CivicMD* VIP Member Join Date: Jun 2007 Location: Odenton Age: 38 Posts: 1,320 Roger iTrader: 4 / 100%	SC61 should be fine and you could go as larger if you wanted to. PT6976E. __________________ Monster Dyno Run on HGH

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Starting Issue /Ignition issue/ - Merged threads	cornflake	Mechanical Problems & Technical Chat	64	07-17-2008 08:09 AM
CAI clearance issue	FG207Si	Mechanical Problems & Technical Chat	1	03-17-2008 12:55 AM
Excelerate Clearance !!!	Excelerate	Excelerate Performance	22	02-15-2008 01:01 PM
Enough clearance?	poizun	Civic Coupe And Sedan	2	02-21-2007 03:54 PM
HFP Magnaflow Muffler Clearance issue?	RSwanson26	Inside and Out	0	09-16-2006 12:08 AM

03-31-2008, 11:33 PM	#2 (permalink)
RJRacing Member Join Date: Feb 2008 Location: N. Virginia Posts: 65 Ryan iTrader: 0 / 0%	All of this is going to depend on the turbo exhaust manifold you will be running.

03-31-2008, 11:54 PM	#3 (permalink)
xxdynhamikxx Member Join Date: Feb 2008 Posts: 86 iTrader: 0 / 0%	Oh yea sorry. Its the greddy style log manifold.

04-17-2008, 02:07 AM	#4 (permalink)
nightbear Member Join Date: Sep 2007 Location: moco Posts: 57 Ryan iTrader: 0 / 0%	sell your super charger and get a turbo

04-17-2008, 02:07 PM	#7 (permalink)
nightbear Member Join Date: Sep 2007 Location: moco Posts: 57 Ryan iTrader: 0 / 0%	in that case, u shouldnt have clearence issues its made to fit

04-27-2008, 03:17 PM	#9 (permalink)
xxdynhamikxx Member Join Date: Feb 2008 Posts: 86 iTrader: 0 / 0%	Cool thanks. Yea, I saw how much room was back there when I was trying to install my header.

04-27-2008, 07:59 PM	#10 (permalink)
enter801 Senior Member Join Date: Feb 2006 Age: 30 Posts: 468 iTrader: 0 / 0%	Do you have the Greddy kit already installed? I am about to get a different turbo charger since my Greddy turbo just flippin broke. It is leaking oil through teh exhaust housing and into my log manifold and exhaust ports.

04-30-2008, 04:55 AM	#11 (permalink)
xxdynhamikxx Member Join Date: Feb 2008 Posts: 86 iTrader: 0 / 0%	Ew. Nah. I'm not installing anything until Kpro is finally released. I'm not settling for anything less. I'm getting so impatient. Almost to the point that I might sell out and get a Comptech SC. Then again, I can't see myself spending $3000+ for a part that doesnt have nearly the potential of a turbo.