Sneak pics of my turbo kit.

[sickyute]

The all japanese "marvie kit" as it's been christenned :)

figured i's wait for someone to make a turbo thread before i made mine cuz i always tend to post stuff on here kinda first i guess...but now HTEC17 got the ball rolling with his Greddy kit...here yall go :)

just a few cell camera pics to tease...more to come.






it's a lot harder to see the intercooler than the picture shows when the car is sitting on the ground...

i'll post some more pics including the interior and gauge cluster etc when i get a proper cam...these were camera phone pics...i have more pics including some of the manifold but i'm not sure if they want pics of their manifold out there yet.

weather permitting i'll have some nice goodies and info for yall by weekend :)

EDIT

-SC-6176E turbo http://www.precisionturbo.net/turboc...tegory_id=3026
-HKS super sequential BOV
-tial 38mm wastegate
-intercooler
-all piping
-3"downpipe
-custom turbo manifold...details later...details were posted in another thread somewhere on here by the manifold designer/fabricator:)...i'll look for it...i think it was in blackfg2's post labelled getting tuned i believe...should be on the later pages.
-dual k&n 3" intake filter
-aem wideband afr gauge
-aem boost gauge + boost controller combo gauge
-570 cc injectors
-walbro fuel pump
-all needed heatshield mterial
-apex-i afc neo

for any other info. or for anything i may have left out..contact sales@ajperformance.com The aboved mentions parts are from the Sickyute/Marvie kit as they have decided to call it...so if that's what u want then u should ask specifically for that kit...otherwise just as general questions or about their regular setup which i don't have many details on.

the car will be tuned @ about 8 psi...maybe more...maybe less...but not less than 7 psi.
turbo spools really quick from what i remember in my test run...and it wasn't tuned fully yet.

the bottom end of the car remains the same...the next major mod will be the clutch...valvetrain etc. will not be necessary as of yet...don't plan to go too crazy with it yet where i'll need to build the motor...i was actually thinking of it..doing the spring, retainers, pistons and rods etc...but that's not needed as of yet...clutch kit for now :)

to answer questions lower down...yes i'll be making more mid range and top end than the greddy kit...but at a slightly higher psi than the greddy kit is running and from a bigger turbo also...so it cannot be directly compared as greddy VS my kit.

maybe the regular all japanese kit can be directly compared if it was to run the same psi on a comparable size turbo.

[Zesti1]

Awesome pictures Sickyute!!!

Cant wait to see the weekend goodies!!!

[pickle430]

cant wait to see a vid. what psi are you going to be running?

[Only a R18]

The jap kit makes more hp at the top of the power band than the greddy right??

[Yodums]

Nice... We'll be looking forward to the updates later this week. :)

[skittleslegend]

Originally Posted by Only a R18

The jap kit makes more hp at the top of the power band than the greddy right??

I actually think it produces more mid-to-top end, not just top-end. However, I don't think these kits are running at the same psi.....which would make a difference in what each kit puts out. I could be wrong though. It's just a bolt on kit so it's still running at the stock compression. Unless he's not telling us that they built the bottom end while they were at it.

[atruhondagrl]

Dang Marvie. I think I'm falling in


Can't wait to see that bad boy on the road! You're going to the Dragon meet right?

[06CivEXJon]

Wow thats awesome,that,the greddy kit and the turbonetics.

[HAQER]

Skittles, I am sure he is running stock compression, he specifically said that the bottom end remains the same.

[sickyute]

Originally Posted by atruhondagrl

Dang Marvie. I think I'm falling in


Can't wait to see that bad boy on the road! You're going to the Dragon meet right?

yes i'll be there :)

[SpeedDemon]

Damn I love the sound of a turbo, marvie, your a lucky man my brotha, you must be very happy..

[sickyute]

happy is not the word...
still thinking of a way to express the feeling...

[bizzybearfigiblue]

Originally Posted by sickyute

happy is not the word...
still thinking of a way to express the feeling...

express the feeling with love and free test drives

[BATANG CITY JAIL]

how much money you put in to?

[larryd]

Looks Nice.. I remember the days of taking pics of my turbos :)

[sickyute]

Originally Posted by BATANG CITY JAIL

how much money you put in to?

Z..............E...............R.................0
even other stuff i specified that i wanted chaged that was not to be included was changed out for me at no extra cost....talk about good service!!!

other mods on my car though i put...anything related to the turbo or tuning = freebee.

thanks to the professional at ALL JAPANESE PERFORMANCE
sales@ajperformance.com

maybe i can get them to be a site sponsor...hmmmmmmm

[Cookstar]

Originally Posted by sickyute

Z..............E...............R.................0
even other stuff i specified that i wanted chaged that was not to be included was changed out for me at no extra cost....talk about good service!!!

other mods on my car though i put...anything related to the turbo or tuning = freebee.

thanks to the professional at ALL JAPANESE PERFORMANCE
sales@ajperformance.com

maybe i can get them to be a site sponsor...hmmmmmmm

You lucky bastard!

[CivicWithNav]

its all about where you live...

how close you are to these folks and bam you get a free turbo kit :)

ahhh sux living in middle of no where

i'm taking vid of the turbo SI!

[caveman74]

Damn dude, thats like winning the lottery. You suck!!!!! J/K

[06blaksi]

Give me a free turbo kit and I'll plaster ALL JAPS name and logo all over my car