http://www.8thcivic.com/forums/ 2006 2007civic,2007 honda civic,2009 civic, 2010 Civic forum,2006 Civic Si,2006 Honda Civic SI,2006 Civic Forum,insurance quotes,car insurance,vbulletin,jelsoft,bulletin board,2006 Honda Civic Online Forum - Car Community, Chat, And More. We Have The Largest Collection Of 2006 Civic Images en Wed, 19 Jun 2013 18:25:07 GMT vBulletin 60 http://www.8thcivic.com/forums/images/misc/rss.jpg http://www.8thcivic.com/forums/ http://www.8thcivic.com/forums/intake-spacer-discussion/336721-4inch-intake-question.html Wed, 19 Jun 2013 16:58:17 GMT Is it ok to run a 4inch intake on an N/A setup? Is anyone doing that now, if so what mods and what gains have you got? Better than 3.5 on an N/A? Is it ok to run a 4inch intake on an N/A setup? Is anyone doing that now, if so what mods and what gains have you got? Better than 3.5 on an N/A? ]]> ballin bosox http://www.8thcivic.com/forums/intake-spacer-discussion/336721-4inch-intake-question.html http://www.8thcivic.com/forums/wheel-tire-upgrades/336705-05-sti-wheels.html Wed, 19 Jun 2013 16:11:45 GMT I'm thinking about getting some 05 STI wheels for my fa5,and i was wondering what all I'm going to have to do in order for them to fit.if there is anybody on here who has dealt with this,your input is highly appreciated.thanks so much!
I was told all i will need is 20mm spacers for them to fit

Also,what is a good price to pay for just the rims in good condition with no tires? ]]> Wheel And Tire Upgrades Corey_ http://www.8thcivic.com/forums/wheel-tire-upgrades/336705-05-sti-wheels.html http://www.8thcivic.com/forums/honda-part-world/336681-impress-first-step.html Wed, 19 Jun 2013 14:34:54 GMT Impress passengers from the first step while protecting your Honda from scratches & scrapes with custom door sill plates.



Honda Part World has the best available selection of Honda accessories. ]]> Honda Part World HondaPartWorld http://www.8thcivic.com/forums/honda-part-world/336681-impress-first-step.html http://www.8thcivic.com/forums/civic-si/336665-07-si-brz-after-work-photo-shoot.html Wed, 19 Jun 2013 14:09:23 GMT Quick photo shoot after work. The Si needs a wash. Image: https://dl.dropboxusercontent.com/u/60206158/Si%20and%20FR-S/photo%201.JPG Image: https://dl.dropboxusercontent.com/u/60206158/Si%20and%20FR-S/photo%202.JPG Image:... Quick photo shoot after work. The Si needs a wash.






]]> Civic SI nevetSi http://www.8thcivic.com/forums/civic-si/336665-07-si-brz-after-work-photo-shoot.html http://www.8thcivic.com/forums/ontario/336657-possible-faulty-chain-tensioner-looking-local-shop-diagnose.html Wed, 19 Jun 2013 13:56:51 GMT Hey all, my car has started to make a raspy Rattling noise on idle and half throttle and it seems like it is coming from the engine bay and it may be a chain tensioner - my car is now out of warranty and i am looking for a reasonable shop that charges fair prices that ca the assess and fix the... Hey all, my car has started to make a raspy Rattling noise on idle and half throttle and it seems like it is coming from the engine bay and it may be a chain tensioner - my car is now out of warranty and i am looking for a reasonable shop that charges fair prices that ca the assess and fix the issue - would appreciate some direction on some good shops I can go to for this- also if someone could tell me the ballpark range it would cost me if the chain tensioner is the issue that would be great

Thanks

Lucas ]]> Ontario LucsSiCoupe http://www.8thcivic.com/forums/ontario/336657-possible-faulty-chain-tensioner-looking-local-shop-diagnose.html http://www.8thcivic.com/forums/i-c-e-electrical-security-navigation/336649-civic-factory-stereo-problems.html Wed, 19 Jun 2013 13:35:37 GMT Hello everyone,

Here is my problem:

The stereo inside my coupe is acting really twitchy. What I mean by this is that while I'm using the radio/cd/aux the stereo will switch a couple times to a different input and finally settle on one. I noticed that the problem occurs more frequently on bumpy roads but it still does it on a road that is flat. On certain occasions the stereo was fixed after I shut off and started the car.

I was wondering if anyone knew the reason for my radio problems. If someone can tell me whats wrong or help me find it by eliminating things I would greatly appreciate it. ]]> mannymuniz http://www.8thcivic.com/forums/i-c-e-electrical-security-navigation/336649-civic-factory-stereo-problems.html http://www.8thcivic.com/forums/mid-atlantic/336633-bbq-meet-poll.html Wed, 19 Jun 2013 13:13:32 GMT So this is for those in the Mid Atl Chat thread, so we can figure out which weekend works best for the most amount of people. If both weekends work, please select 'both' if only one works please select that weekend, please do not only select one if you simply have that as a preference, but could very easily make either weekend work.

Thanks! ]]> Mid-Atlantic aLmk http://www.8thcivic.com/forums/mid-atlantic/336633-bbq-meet-poll.html http://www.8thcivic.com/forums/garage/336625-converting-lpg.html Wed, 19 Jun 2013 11:30:15 GMT Hi

I posted this in another part of the forum but didn't get much response. I have since noticed that hardly anyone read that part of the forum so thought I would post it here to see if anyone had any advice or experience with this?

I use my Civic Hybrid as a taxi. I bought it 6 month ago thinking that I would be getting 55mpg. Very unhappy at the 42mpg that it actually delivers. I feel totally misled by Honda with their official figures which are in the realms of fantasy. All the manufacturers are unrealistic but the civic mpg official figures are a total con. I guess they are probably the original figures and don't reflect software updates. Anyway it not all doom and gloom on the Civic as I bought it with 25,000 miles on and I now have 55,000 miles on the clock and haven't spent a penny on repairs. So at least their reputation for solid reliability seems to be true.

I am toying with the idea of getting it converted to lpg. I didn't know it was possible to do an LPG conversion on a Hybrid until I recently discovered Hyundai have actually just launched the new Elantra. It is the worlds first LPG/Hybrid. Shame it isn't available in the UK yet though but hopefully will be in time.

My question really is whether anyone has ever had their Civic Hybrid converted or would they consider it? Are there any problems that anyone could see with doing this?

For me mpg makes a huge difference as I do 1000 miles a week. My current spend on fuel is £140 a week. Converting to LPG will probably reduce my fuel bill by around £60 week. A cool £3000 a year. Conversion cost £1800.

Anyone have any thoughts on it? Feel free to reply for LPG conversions on Honda in general if you aren't sure on Hybrid as I may consider selling my Civic and doing a conversion on an Accord. ]]> Garage rayvonyo http://www.8thcivic.com/forums/garage/336625-converting-lpg.html http://www.8thcivic.com/forums/mechanical-problems-technical-chat/336617-fuel-filter.html Wed, 19 Jun 2013 11:20:05 GMT Hi

I was looking in my owners manual under maintenance and it states the fuel filter is to be replaced at 50,000 miles. This has not been done on mine. I asked the garage I use if they could do this at the next service and they said it doesn't need one as it has an inbuilt lifetime fuel filter. I showed them the owner manual where it clearly states it is to be changed every 50,000 miles but they still dismissed it and said the manual was probably for all Honda Civics nut your Civic is different.

Anyway can someone please tell me whether they are right or just fobbing me off?

Thanks ]]> rayvonyo http://www.8thcivic.com/forums/mechanical-problems-technical-chat/336617-fuel-filter.html http://www.8thcivic.com/forums/introduction-pictures/336585-simple-hello.html Wed, 19 Jun 2013 05:58:38 GMT Hello.



I was added on the Facebook 8thcivic group last year. Now I'm here.... Well, the account's been here since last year, but now I'm here. If that makes sense.

I, of course, love working on cars whether they be mine or my buddies', but I spend most of my time, when I'm not working, with photography, and web design.

-Issy ]]> Issy Isamu http://www.8thcivic.com/forums/introduction-pictures/336585-simple-hello.html http://www.8thcivic.com/forums/introduction-pictures/336577-new-ontario.html Wed, 19 Jun 2013 04:33:00 GMT Hi all! I just joined here. I like to to discuss with car problems and help others :) Hi all!

I just joined here. I like to to discuss with car problems and help others :) ]]> andy_ http://www.8thcivic.com/forums/introduction-pictures/336577-new-ontario.html http://www.8thcivic.com/forums/mechanical-problems-technical-chat/336569-tap-not-tap.html Wed, 19 Jun 2013 04:30:08 GMT So I made a boo boo today:( I stripped a bolt that holds my rear camber strut to my frame. My dads old hillbilly buddy decided rather than takeing the exaust off the brace n moving it we could use an impact wrench with an adjustable head to put it on. This made the bolt go in slightly sideways, I... So I made a boo boo today:( I stripped a bolt that holds my rear camber strut to my frame. My dads old hillbilly buddy decided rather than takeing the exaust off the brace n moving it we could use an impact wrench with an adjustable head to put it on. This made the bolt go in slightly sideways, I didn't see him in time to stop him. Well we replaced the bolt with a shorter one because the OEM bolt wouldn't thread all the way. It seems to be holding now but I feel stupid with skunk2 camber struts n a cross threaded bolt holding it up. I drove it for an hour checking it every 10 minutes and it seems to be holding fine. Should I try to fix the threads with a tap, take it to a shop point and say fix it, or leave it as is and call it good? ]]> suthernpride59 http://www.8thcivic.com/forums/mechanical-problems-technical-chat/336569-tap-not-tap.html http://www.8thcivic.com/forums/inside-out/336561-how-did-you-modify-ctr-push-start.html Wed, 19 Jun 2013 04:25:58 GMT Parts are in but now wondering how i should approach this.. Image: http://i124.photobucket.com/albums/p27/hwangsta421/20130618_211950.jpg (http://s124.photobucket.com/user/hwangsta421/media/20130618_211950.jpg.html) Did you guys dremel out the sections? if so, which bits did you guys use? I... Parts are in but now wondering how i should approach this..



Did you guys dremel out the sections? if so, which bits did you guys use?
I have a dremel kit with lots of tiny bits, just dont know which ones would work best.

Also for the mis-aligning bolts, i was planning to dremel out the tabs on a spare VSA housing, jb weld it onto the ctr in place needed.

I have all the necessary components to start, just wanted to know if theres any other way around jb welding it onto the push start. Thank you. ]]> Inside and Out rlfa5 http://www.8thcivic.com/forums/inside-out/336561-how-did-you-modify-ctr-push-start.html http://www.8thcivic.com/forums/mechanical-problems-technical-chat/336545-jerk-deseleration-honda-civic-2008-auto.html Wed, 19 Jun 2013 04:17:59 GMT Hi. i have a 2008 civic LX auto, sometimes When I take my foot off the gas, the rev drops very quick and the cars felt like braking and the deceleration is not smoothly.. then if u press the gas sometimes the car felt like flooded i have no CEL and changed air filter. any idea? Hi.

i have a 2008 civic LX auto, sometimes When I take my foot off the gas, the rev drops very quick and the cars felt like braking and the deceleration is not smoothly.. then if u press the gas sometimes the car felt like flooded

i have no CEL and changed air filter.

any idea? ]]> civicex1995 http://www.8thcivic.com/forums/mechanical-problems-technical-chat/336545-jerk-deseleration-honda-civic-2008-auto.html http://www.8thcivic.com/forums/civic-si/336529-green-key.html Wed, 19 Jun 2013 03:27:22 GMT I ran a gauge diagnostic test and I noticed a flashing green key symbol om the left side. I've never seen it light up before. What does it mean? ]]> Civic SI lollbsft2 http://www.8thcivic.com/forums/civic-si/336529-green-key.html