DIY jdm emblems

prime time si · 12-29-2006, 04:28 PM

i did a search on this and couldn't find anything so i did it myself hope this helps someone.

(1)first take off the tabs holding plastic part to grill

(2)once you have that out of the way you will need to unscrew these bolts
one on each side.

(3)next you will have to pull back on the grill just enough to get a small screwdriver inside and undo screws,i wasn't able to get a pic of all the screws but once you start taking them off you will see the ones that need to come off

(4)once you get all the screws undone their are two tabs press on them and grill should slide right out

(5)next on back side of grill they have two screws holding on old emblem unscrew these and emblem will come off

(6)next take off film on new emblem, line up ,and stick on front off grill

(7) now just put everything back on the way you took it off and that's it for the front.

(8)now for the back start by opening trunk and find the two little white tabs that are holding emblem on

(9) press them and push, emblem should come right off.

(10) next clean off where old emblem was on outside of trunk,cut the tabs on new emblem becuase they won't line up, center new emblem on trunk peel off film and stick

(11) and that's it, this is what you should end up with.

lightlypurified · 12-29-2006, 05:55 PM

LOooks good i jsut recently purchased a red honda emblem for my rear coupe fg1 and never knew how to take out the front grill thanks for the pics.

JeShUa · 12-29-2006, 06:32 PM

thanks for taking time out for a little diy....
now go clean your car

untouchablesi · 12-29-2006, 06:33 PM

thanks for the diy

DTurnbull · 12-29-2006, 06:34 PM

Rudolf The Red-Nosed-Reindeer......

fa1 · 12-29-2006, 06:39 PM

Quote:

Originally Posted by DTurnbull

Rudolf The Red-Nosed-Reindeer......

has a very dirty nose...

Nice diy +repped

prime time si · 12-29-2006, 08:25 PM

Quote:

Originally Posted by JeShUa

thanks for taking time out for a little diy....
now go clean your car

yea i know i live in south la. and it is sugar cane grinding season

UncleSid · 12-29-2006, 08:41 PM

whats w/ the mitsubishi decal thingy on the back window??? The person the memorial is for like mutsubishi or something??

prime time si · 12-29-2006, 11:56 PM

Quote:

Originally Posted by UncleSid

whats w/ the mitsubishi decal thingy on the back window??? The person the memorial is for like mutsubishi or something??

yea he was one of my good friends in our car club he had an eclipse

UncleSid · 12-29-2006, 11:57 PM

ah, i see. nice DIY by the way.

tennisfan16 · 12-29-2006, 11:58 PM

nice little write up, by why did you put the thread in this forum, there is a diy forum.

truflip · 12-30-2006, 12:06 AM

nice DIY but ever heard of macro modes in cameras? or was this a cellphone camera? just curious!

**Silver8th** · 12-30-2006, 12:35 AM

Emblems look real nice on there. Thanks for the DIY.

....moved to DIY Forum

imtim25 · 12-30-2006, 04:35 AM

wow i didnt know you had to go through all that for the emblems

nice DIY

prime time si · 12-30-2006, 10:44 AM

Quote:

Originally Posted by truflip

nice DIY but ever heard of macro modes in cameras? or was this a cellphone camera? just curious!

no just got my camera what's that?

prime time si · 12-30-2006, 10:45 AM

Quote:

Originally Posted by tennisfan16

nice little write up, by why did you put the thread in this forum, there is a diy forum.

yea i noticed after i did it i put it in the wrong thread sorry.

truflip · 12-30-2006, 11:02 AM

macro mode means you can take a focused (not blurry) shot when your taking close up shots.. look for a little flower icon on your camera and press that.. try taking a shot from like.. 10 inches away n see the magic =P

prime time si · 12-30-2006, 12:14 PM

Quote:

Originally Posted by truflip

macro mode means you can take a focused (not blurry) shot when your taking close up shots.. look for a little flower icon on your camera and press that.. try taking a shot from like.. 10 inches away n see the magic =P

thanks i'll try that next time

todsulli · 12-30-2006, 02:10 PM

Have any of you guys had a problem with the rear emblem peeling off due to weather or car washes etc. Just curious thanks for the DIY on the emblems.

Sully

cbizz · 12-30-2006, 02:24 PM

I just stuck a flat head screw driver underneath the stock logo on the front grill and broke it off.. it's only plastic and breaks with little to no stress.. you will need a dremel tool to cut away the tabs left from the stock emblem.. then just peel and stick.. 5min job tops!

12-29-2006, 04:28 PM	#1 (permalink)
prime time si Senior Member Join Date: Oct 2006 Location: DIRTY SOUTH, LOUSIANA Posts: 1,039 dustin iTrader: 9 / 100%	DIY jdm emblems i did a search on this and couldn't find anything so i did it myself hope this helps someone. (1)first take off the tabs holding plastic part to grill (2)once you have that out of the way you will need to unscrew these bolts one on each side. (3)next you will have to pull back on the grill just enough to get a small screwdriver inside and undo screws,i wasn't able to get a pic of all the screws but once you start taking them off you will see the ones that need to come off (4)once you get all the screws undone their are two tabs press on them and grill should slide right out (5)next on back side of grill they have two screws holding on old emblem unscrew these and emblem will come off (6)next take off film on new emblem, line up ,and stick on front off grill (7) now just put everything back on the way you took it off and that's it for the front. (8)now for the back start by opening trunk and find the two little white tabs that are holding emblem on (9) press them and push, emblem should come right off. (10) next clean off where old emblem was on outside of trunk,cut the tabs on new emblem becuase they won't line up, center new emblem on trunk peel off film and stick (11) and that's it, this is what you should end up with.

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/exterior-style-mods/24601-diy-jdm-emblems.html
Posted By	For	Type	Date
Exterior Style Mods [Archive] - 8th Generation Honda Civic Forum	This thread	Refback	02-26-2008 08:46 PM
D.I.Y. Si Grill on LX/DX/EX Sedan! - Page 5 - 8th Generation Honda Civic Forum	This thread	Refback	01-11-2008 10:34 AM
8th Generation Honda Civic Forum	This thread	Refback	01-07-2008 07:18 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rare JDM 1987 Civic Si Sedan (yes 87)	si_civic	Water Cooler	34	05-09-2008 12:06 AM
Honda car codes FG2, EP, etc.?	GlennS	Garage	14	02-27-2008 01:29 AM
JDM Rice Test	FujiBlueSi	Water Cooler	13	12-11-2007 01:59 AM
JDM Emblems	baz938	Wanted Forum	10	03-25-2007 03:23 PM
JDM emblems	CivicWithNav	Inside and Out	2	10-17-2006 08:19 PM

12-29-2006, 05:55 PM	#2 (permalink)
lightlypurified Senior Member Member Join Date: Jun 2006 Posts: 1,163 iTrader: 0 / 0%	LOooks good i jsut recently purchased a red honda emblem for my rear coupe fg1 and never knew how to take out the front grill thanks for the pics.

12-29-2006, 06:32 PM	#3 (permalink)
JeShUa Senior Member Join Date: Apr 2006 Posts: 12,196 Keepin` it Phresh iTrader: 11 / 100%	thanks for taking time out for a little diy.... now go clean your car

12-29-2006, 06:33 PM	#4 (permalink)
untouchablesi Senior Member Join Date: Jul 2006 Location: Toronto Age: 21 Posts: 356 David iTrader: 0 / 0%	thanks for the diy

12-29-2006, 06:34 PM	#5 (permalink)
DTurnbull Senior Member Join Date: Aug 2006 Posts: 398 iTrader: 0 / 0%	Rudolf The Red-Nosed-Reindeer......

12-29-2006, 08:41 PM	#8 (permalink)
UncleSid Senior Member Join Date: May 2006 Location: Taylor MI Age: 24 Posts: 661 Sid iTrader: 1 / 100%	whats w/ the mitsubishi decal thingy on the back window??? The person the memorial is for like mutsubishi or something??

12-29-2006, 11:57 PM	#10 (permalink)
UncleSid Senior Member Join Date: May 2006 Location: Taylor MI Age: 24 Posts: 661 Sid iTrader: 1 / 100%	ah, i see. nice DIY by the way.

12-29-2006, 11:58 PM	#11 (permalink)
tennisfan16 Senior Member Join Date: Mar 2006 Location: I have a cat. Age: 24 Posts: 3,724 iTrader: 3 / 100%	nice little write up, by why did you put the thread in this forum, there is a diy forum.

12-30-2006, 12:06 AM	#12 (permalink)
truflip Senior Member Join Date: Dec 2006 Location: Ottawa, ON Age: 22 Posts: 7,139 iTrader: 11 / 100%	nice DIY but ever heard of macro modes in cameras? or was this a cellphone camera? just curious!

12-30-2006, 12:35 AM	#13 (permalink)
Silver8th Join Date: Sep 2005 Posts: 6,634 iTrader: 4 / 100%	Emblems look real nice on there. Thanks for the DIY. ....moved to DIY Forum

12-30-2006, 04:35 AM	#14 (permalink)
imtim25 Senior Member Join Date: Jul 2006 Posts: 1,283 iTrader: 0 / 0%	wow i didnt know you had to go through all that for the emblems nice DIY

12-30-2006, 11:02 AM	#17 (permalink)
truflip Senior Member Join Date: Dec 2006 Location: Ottawa, ON Age: 22 Posts: 7,139 iTrader: 11 / 100%	macro mode means you can take a focused (not blurry) shot when your taking close up shots.. look for a little flower icon on your camera and press that.. try taking a shot from like.. 10 inches away n see the magic =P

12-30-2006, 02:10 PM	#19 (permalink)
todsulli Member Join Date: Dec 2006 Location: Northern Virginia Posts: 51 iTrader: 0 / 0%	Have any of you guys had a problem with the rear emblem peeling off due to weather or car washes etc. Just curious thanks for the DIY on the emblems. Sully

12-30-2006, 02:24 PM	#20 (permalink)
cbizz Senior Member Join Date: Jun 2006 Location: Halifax N.S Canada Age: 28 Posts: 303 Chuck Mitchell iTrader: 1 / 100%	I just stuck a flat head screw driver underneath the stock logo on the front grill and broke it off.. it's only plastic and breaks with little to no stress.. you will need a dremel tool to cut away the tabs left from the stock emblem.. then just peel and stick.. 5min job tops!