Rear Sway Bar Reinforcement Brackets for the 06+ Civic!!!

***Excelerate*** · 01-09-2008, 04:19 PM

This is a special 8thCivic.com sales event for the Redshift Rear Sway Bar Reinforcement Brackets for the 06+ Civic.

These are designed to reinforce the stock metal tab so that something like this doesn't happen (click the thread link):

Important info for all those with aftermarket sways!

This bracket is 3/16" thick (150% thicker than the OE bracket) and is made of laser cut CNCed T304 Stainless Steel. Here is a drawing of what the CNC bracket will look like. The two smaller holes are threaded and it will come with both bolts necessary to install the bracket. You will need to drill a hole for the second hole on the bracket in order to get full support out of the bracket. The bracket will be placed on the rear side of the vehicle, closer to the rear bumper, the opposide side of the end link.

Here are the directions for this rear sway bar bracket:

http://www.redshiftmotorsports.com/I...20SU06CSRB.doc

The following payment terms are accepted: Bank or Teller Check, Money Order, sent to:

Excelerate LLC
998 West Main St
Branford, CT 06405

You may also send payment to Excelerate@sbcglobal.net via Paypal. Or you can call in your CC info at 203-483-6100.

Shipping times will depend upon your location. Prices based on shipping to 48 continental states in the U.S. The prices will run as follows:

Honda Civic Si 06+

- Redshift Rear Sway Bar Reinforcement Bracket - $69 shipped
- Progress 22MM Rear Sway Bar with Redshift RSB Support Brackets - $210 shipped

AIM Screen Name: Excelerate04
E-mail: Excelerate@sbcglobal.net
or PM me.

RETURN POLICY
- ALL RETURNED AND/OR CANCELLED ORDERS ARE SUBJECT TO A 25% RE-STOCKING FEE PLUS ALL SHIPPING CHARGES (Includes original and return S&H fees).
- ALL AUTHORIZED RETURN MERCHANDISE MUST BE NEW, UNUSED, AND IN ITS ORIGINAL PA CKAGING. ALL DOCUMENTATION, WARRANTY CARDS, INSTRUCTIONS, AND HARDWARE MUST ALSO BE RETURNED.
- ITEMS MAY BE RETURNED WITHIN 15 CALENDAR DAYS FROM THE RECEIPT OF MERCHANDISE.
- SPECIAL ORDERS ARE NOT RETURNABLE.
- ALL DEPOSITS ARE NON-REFUNDABLE.

EXCELERATE LLC
998 West Main St
Branford, CT 06405
(P) 203-483-6100 (F) 203-483-6101
Excelerate Performance
Joshua Lockwood
Owner

e60.deluxe · 01-09-2008, 04:25 PM

paypal sent.

***Excelerate*** · 01-09-2008, 04:26 PM

These will be available to ship in about 3 weeks.

e60.deluxe · 01-09-2008, 04:26 PM

thats fine.

**8thgenuser** · 01-09-2008, 04:31 PM

Fits both sedan and coupe?

***Excelerate*** · 01-09-2008, 04:32 PM

Quote:

Originally Posted by 8thgenuser

Fits both sedan and coupe?

Yes, I will confirm with Redshift but I don't believe there is any difference.

***sgtpruitt*** · 01-09-2008, 04:34 PM

Ship to Iraq?

haha J/P

I was waiting on those to come out.

brdhouse · 01-09-2008, 04:42 PM

paypal sent.

***Excelerate*** · 01-09-2008, 07:07 PM

Quote:

Originally Posted by 8thgenuser

Fits both sedan and coupe?

This was tested on two 06 Civic Si's. I will test it on my 07 Civic Si 2DR when I get them in and then I will test it on a local customers 4DR Si. I don't see why it wouldn't fit with all years and models though.

20civic07 · 01-09-2008, 10:56 PM

finally... i want these... will send payment when they come out!!! could you also take pics to see how they are look nstalled?

honda_racer07 · 01-09-2008, 11:57 PM

Payment made via paypal tonight! Please send email when they ship.

handling!

GORDATA · 01-10-2008, 12:00 AM

Is this HighRev1 reinforcement??

***Highrev1*** · 01-10-2008, 12:01 AM

Its the REDSHIFT bracket

honda_racer07 · 01-10-2008, 12:02 AM

Oooooooohhh Yea!!!!!!!!!!!!!

tommyroo · 01-10-2008, 11:15 AM

Quote:

Originally Posted by Excelerate

You will need to drill a hole for the second hole on the bracket in order to get full support out of the bracket.

Wouldn't drilling a hole weaken the bracket even more?

e60.deluxe · 01-10-2008, 01:38 PM

Quote:

Originally Posted by tommyroo

Wouldn't drilling a hole weaken the bracket even more?

i think your drilling a whole in the subframe..

tommyroo · 01-10-2008, 01:45 PM

Quote:

Originally Posted by e60.deluxe

i think your drilling a whole in the subframe..

Sorry, I didn't mean to say we would be drilling a hole in the bracket were purchasing.

I think what were buying goes over this part that broke. Therefore we would be drilling a hole into the very part that is weak to begin with.

e60.deluxe · 01-10-2008, 01:52 PM

right, but your also dispersing the force over one more contact right..

MellowGato · 01-10-2008, 02:08 PM

Excelerate, is this a product that will continue to be sold, or is this just being sold for a limited time?

Thanks

***Excelerate*** · 01-10-2008, 04:37 PM

If you look at this picture you will be drilling a hole to the left of the hole there for the additional support/strength.

This is a product that will be sold continually. It will likely be done in batches but I will be keeping them in stock.

01-09-2008, 04:19 PM	#1 (permalink)
*Excelerate* 8thcivic Sponsor Join Date: Oct 2006 Location: Branford, CT Age: 27 Posts: 1,211 Joshua Lockwood iTrader: 34 / 100%	Rear Sway Bar Reinforcement Brackets for the 06+ Civic!!! This is a special 8thCivic.com sales event for the Redshift Rear Sway Bar Reinforcement Brackets for the 06+ Civic. These are designed to reinforce the stock metal tab so that something like this doesn't happen (click the thread link): Important info for all those with aftermarket sways! This bracket is 3/16" thick (150% thicker than the OE bracket) and is made of laser cut CNCed T304 Stainless Steel. Here is a drawing of what the CNC bracket will look like. The two smaller holes are threaded and it will come with both bolts necessary to install the bracket. You will need to drill a hole for the second hole on the bracket in order to get full support out of the bracket. The bracket will be placed on the rear side of the vehicle, closer to the rear bumper, the opposide side of the end link. Here are the directions for this rear sway bar bracket: http://www.redshiftmotorsports.com/I...20SU06CSRB.doc The following payment terms are accepted: Bank or Teller Check, Money Order, sent to: Excelerate LLC 998 West Main St Branford, CT 06405 You may also send payment to Excelerate@sbcglobal.net via Paypal. Or you can call in your CC info at 203-483-6100. Shipping times will depend upon your location. Prices based on shipping to 48 continental states in the U.S. The prices will run as follows: Honda Civic Si 06+ - Redshift Rear Sway Bar Reinforcement Bracket - $69 shipped - Progress 22MM Rear Sway Bar with Redshift RSB Support Brackets - $210 shipped AIM Screen Name: Excelerate04 E-mail: Excelerate@sbcglobal.net or PM me. RETURN POLICY - ALL RETURNED AND/OR CANCELLED ORDERS ARE SUBJECT TO A 25% RE-STOCKING FEE PLUS ALL SHIPPING CHARGES (Includes original and return S&H fees). - ALL AUTHORIZED RETURN MERCHANDISE MUST BE NEW, UNUSED, AND IN ITS ORIGINAL PA CKAGING. ALL DOCUMENTATION, WARRANTY CARDS, INSTRUCTIONS, AND HARDWARE MUST ALSO BE RETURNED. - ITEMS MAY BE RETURNED WITHIN 15 CALENDAR DAYS FROM THE RECEIPT OF MERCHANDISE. - SPECIAL ORDERS ARE NOT RETURNABLE. - ALL DEPOSITS ARE NON-REFUNDABLE. EXCELERATE LLC 998 West Main St Branford, CT 06405 (P) 203-483-6100 (F) 203-483-6101 Excelerate Performance Joshua Lockwood Owner __________________ EXCELERATE PERFORMANCE - Your Official 8thCivic Vendor and Honda Performance Parts Specialist!! See my Comptech, ROTORA, Injen, TEIN, Random Technology, AEM, KAIXEN HID, and K Sport Sales at The Sponsored Posting Forum by Excelerate Performance AIM: Excelerate04 Phone: 203-483-6100 http://www.ExceleratePerformance.com Last edited by twistedframe; 01-09-2008 at 04:28 PM.

01-09-2008, 04:26 PM	#3 (permalink)
*Excelerate* 8thcivic Sponsor Join Date: Oct 2006 Location: Branford, CT Age: 27 Posts: 1,211 Joshua Lockwood iTrader: 34 / 100%	These will be available to ship in about 3 weeks. __________________ EXCELERATE PERFORMANCE - Your Official 8thCivic Vendor and Honda Performance Parts Specialist!! See my Comptech, ROTORA, Injen, TEIN, Random Technology, AEM, KAIXEN HID, and K Sport Sales at The Sponsored Posting Forum by Excelerate Performance AIM: Excelerate04 Phone: 203-483-6100 http://www.ExceleratePerformance.com

01-09-2008, 04:31 PM	#5 (permalink)
8thgenuser Webby's Minion Join Date: Mar 2006 Location: Bay Area, CA Posts: 7,069 Nikon Squad Member #8 iTrader: 1 / 100%	Fits both sedan and coupe? __________________ Next NorCal Meet - North Bay - 8 t h g e n u s e r -

01-09-2008, 04:34 PM	#7 (permalink)
*sgtpruitt* VIP Member Join Date: May 2007 Location: Spooner Street Posts: 3,089 Tim iTrader: 7 / 100%	Ship to Iraq? haha J/P I was waiting on those to come out. __________________ Daily philosophy: Each person has their own moment and place in thought. The Red Wheelbarrow means nothing except to the doctor.

01-09-2008, 10:56 PM	#10 (permalink)
20civic07 Senior Member Join Date: Mar 2007 Posts: 1,255 iTrader: 7 / 100%	finally... i want these... will send payment when they come out!!! could you also take pics to see how they are look nstalled? Last edited by 20civic07; 01-09-2008 at 11:22 PM.

01-09-2008, 04:25 PM	#2 (permalink)
e60.deluxe Senior Member Join Date: Apr 2007 Location: Lake Forest, CA Age: 22 Posts: 4,627 iTrader: 3 / 100%	paypal sent.

01-09-2008, 04:26 PM	#4 (permalink)
e60.deluxe Senior Member Join Date: Apr 2007 Location: Lake Forest, CA Age: 22 Posts: 4,627 iTrader: 3 / 100%	thats fine.

01-09-2008, 04:42 PM	#8 (permalink)
brdhouse Senior Member Join Date: Nov 2006 Location: Burnsville, MN Posts: 863 Lloyd Christmas (Bill) iTrader: 4 / 100%	paypal sent.

01-09-2008, 11:57 PM	#11 (permalink)
honda_racer07 Senior Member Join Date: Jan 2007 Location: Mount Prospect, IL Posts: 250 iTrader: 1 / 100%	Payment made via paypal tonight! Please send email when they ship. handling!

01-10-2008, 12:00 AM	#12 (permalink)
GORDATA Senior Member Join Date: Apr 2007 Location: The Hood, NYC Posts: 489 Big Daddy Surge iTrader: 5 / 100%	Is this HighRev1 reinforcement??

01-10-2008, 12:01 AM	#13 (permalink)
*Highrev1* 8thcivic Sponsor Join Date: Mar 2006 Posts: 3,681 iTrader: 1 / 100%	Its the REDSHIFT bracket __________________ BUY MY CIVIC

01-10-2008, 12:02 AM	#14 (permalink)
honda_racer07 Senior Member Join Date: Jan 2007 Location: Mount Prospect, IL Posts: 250 iTrader: 1 / 100%	Oooooooohhh Yea!!!!!!!!!!!!!

01-10-2008, 01:52 PM	#18 (permalink)
e60.deluxe Senior Member Join Date: Apr 2007 Location: Lake Forest, CA Age: 22 Posts: 4,627 iTrader: 3 / 100%	right, but your also dispersing the force over one more contact right..

01-10-2008, 02:08 PM	#19 (permalink)
MellowGato Senior Member Join Date: Jul 2006 Location: in the slow lane Posts: 541 iTrader: 0 / 0%	Excelerate, is this a product that will continue to be sold, or is this just being sold for a limited time? Thanks

01-10-2008, 04:37 PM	#20 (permalink)
*Excelerate* 8thcivic Sponsor Join Date: Oct 2006 Location: Branford, CT Age: 27 Posts: 1,211 Joshua Lockwood iTrader: 34 / 100%	If you look at this picture you will be drilling a hole to the left of the hole there for the additional support/strength. This is a product that will be sold continually. It will likely be done in batches but I will be keeping them in stock. __________________ EXCELERATE PERFORMANCE - Your Official 8thCivic Vendor and Honda Performance Parts Specialist!! See my Comptech, ROTORA, Injen, TEIN, Random Technology, AEM, KAIXEN HID, and K Sport Sales at The Sponsored Posting Forum by Excelerate Performance AIM: Excelerate04 Phone: 203-483-6100 http://www.ExceleratePerformance.com

Thread Tools
Show Printable Version Email this Page
Display Modes