X intake DIY + Install vids + AFR and Dyno Comparisons - Page 16

***Whocares05050*** · 01-08-2008, 04:46 PM

Quote:

Originally Posted by saiaba

so I read somewhere that he stopped taking orders?

Yes. He's finishing up all the previous orders, and will be selling them through corsport.

squidmaster · 01-08-2008, 05:17 PM

sweeet
great videos

***infinite0216*** · 01-09-2008, 08:51 PM

would adding this intake along with an exhaust make ne difference? i have an evo2 and i definitely don't want to lose power or having my afr readings go all over the place. sorry if it is a repeat question.

soxfan143 · 01-09-2008, 08:57 PM

It is the best intake on the market for our cars. You will not loose power at ANY rpm or will your AFR's go wacky anywhere. I highly recommend it for any NA setup.

***infinite0216*** · 01-09-2008, 09:11 PM

Quote:

Originally Posted by soxfan143

It is the best intake on the market for our cars. You will not loose power at ANY rpm or will your AFR's go wacky anywhere. I highly recommend it for any NA setup.

thanks

bizzybearfigiblue · 01-09-2008, 11:34 PM

Quote:

Originally Posted by soxfan143

It is the best intake on the market for our cars. You will not loose power at ANY rpm or will your AFR's go wacky anywhere. I highly recommend it for any NA setup.

***"Ridge"Racer*** · 01-10-2008, 04:26 PM

X, im curious about taking on this project and was wondering the specifications of the mounting bracket youve fabricated as well as where it interfaces with the intake itself. where can i get the material for that. i understand your profiting from this design so i wont be suprised if you dont devulge that information.

thanks!

***Excalibur*** · 01-10-2008, 04:34 PM

I installed my wife's x intake on her fa5 today and wanted to remind people that want to have the "x intake" sticker on the black rubber hose then you may want to be careful. They're pretty delicate.

***Excalibur*** · 01-10-2008, 04:35 PM

Quote:

Originally Posted by "Ridge"Racer

X, im curious about taking on this project and was wondering the specifications of the mounting bracket youve fabricated as well as where it interfaces with the intake itself. where can i get the material for that. i understand your profiting from this design so i wont be suprised if you dont devulge that information.

thanks!

It hooks up to the clamp that holds onto the apexi filter.

***"Ridge"Racer*** · 01-10-2008, 04:46 PM

and the material, I can guage the length myself i guess, but where to get the metal piece. also how does it attatch to the clamp?

***Excalibur*** · 01-10-2008, 04:48 PM

Quote:

Originally Posted by "Ridge"Racer

and the material, I can guage the length myself i guess, but where to get the metal piece. also how does it attatch to the clamp?

It's shaped kinda like an upsidedown L and the clamp clamps around it and the rubber pipe keeping everything together and also free from movement. I'll post pics later if I get the time and the camera charges back up. Perrin performance makes them.

***"Ridge"Racer*** · 01-10-2008, 04:57 PM

part #?

***Excalibur*** · 01-10-2008, 05:04 PM

Quote:

Originally Posted by "Ridge"Racer

part #?

I think you'd have to get that from x himself or maybe corsport. You could try calling perrin and see if they can help you out. Just explain what you're looking for.

***"Ridge"Racer*** · 01-10-2008, 05:13 PM

hey x, chime in anytime! lol

***Excalibur*** · 01-10-2008, 05:19 PM

Quote:

Originally Posted by "Ridge"Racer

hey x, chime in anytime! lol

I just called him and he said that you can order them through him. Hope that helps.

***"Ridge"Racer*** · 01-10-2008, 05:21 PM

dude you fricken rock! +rep for you both!

***Excalibur*** · 01-10-2008, 05:24 PM

Quote:

Originally Posted by "Ridge"Racer

dude you fricken rock! +rep for you both!

No prob man. Good luck. Hope it turns out nice.

***Zeuceone*** · 01-10-2008, 05:44 PM

it attaches to the filter coupler not the clamp. x sells them for 20.

***"Ridge"Racer*** · 01-10-2008, 07:11 PM

Quote:

Originally Posted by Zeuceone

it attaches to the filter coupler not the clamp. x sells them for 20.

+rep

***Excalibur*** · 01-10-2008, 07:43 PM

Quote:

Originally Posted by Zeuceone

it attaches to the filter coupler not the clamp. x sells them for 20.

Yeah, that's what I mean. I don't know if I didn't word it right or what.

01-10-2008, 04:26 PM	#307 (permalink)
*"Ridge"Racer* I got a mangina! Join Date: May 2007 Location: ATL, attatched to your rod motherlicker Age: 27 Posts: 3,367 Justin iTrader: 9 / 100%	X, im curious about taking on this project and was wondering the specifications of the mounting bracket youve fabricated as well as where it interfaces with the intake itself. where can i get the material for that. i understand your profiting from this design so i wont be suprised if you dont devulge that information. thanks! __________________ TW FG2 Sold....

01-10-2008, 04:46 PM	#310 (permalink)
*"Ridge"Racer* I got a mangina! Join Date: May 2007 Location: ATL, attatched to your rod motherlicker Age: 27 Posts: 3,367 Justin iTrader: 9 / 100%	and the material, I can guage the length myself i guess, but where to get the metal piece. also how does it attatch to the clamp? __________________ TW FG2 Sold....

01-10-2008, 04:57 PM	#312 (permalink)
*"Ridge"Racer* I got a mangina! Join Date: May 2007 Location: ATL, attatched to your rod motherlicker Age: 27 Posts: 3,367 Justin iTrader: 9 / 100%	part #? __________________ TW FG2 Sold....

01-10-2008, 05:13 PM	#314 (permalink)
*"Ridge"Racer* I got a mangina! Join Date: May 2007 Location: ATL, attatched to your rod motherlicker Age: 27 Posts: 3,367 Justin iTrader: 9 / 100%	hey x, chime in anytime! lol __________________ TW FG2 Sold....

01-10-2008, 05:21 PM	#316 (permalink)
*"Ridge"Racer* I got a mangina! Join Date: May 2007 Location: ATL, attatched to your rod motherlicker Age: 27 Posts: 3,367 Justin iTrader: 9 / 100%	dude you fricken rock! +rep for you both! __________________ TW FG2 Sold....

01-08-2008, 05:17 PM	#302 (permalink)
squidmaster Senior Member Join Date: Oct 2007 Location: 町田し東京 Posts: 2,194 Jesse iTrader: 2 / 100%	sweeet great videos

01-09-2008, 08:51 PM	#303 (permalink)
*infinite0216* Sambos \| We the BEST! Join Date: Jan 2007 Location: Perris, CA Posts: 1,278 Andy iTrader: 11 / 100%	would adding this intake along with an exhaust make ne difference? i have an evo2 and i definitely don't want to lose power or having my afr readings go all over the place. sorry if it is a repeat question.

01-09-2008, 08:57 PM	#304 (permalink)
soxfan143 Senior Member Join Date: Nov 2007 Location: Lynnfield, MA Age: 34 Posts: 2,048 Mike iTrader: 2 / 100%	It is the best intake on the market for our cars. You will not loose power at ANY rpm or will your AFR's go wacky anywhere. I highly recommend it for any NA setup.

01-10-2008, 04:34 PM	#308 (permalink)
*Excalibur* VIP Member Join Date: May 2007 Location: Converse, TX. Age: 25 Posts: 7,585 Jeremy iTrader: 22 / 100%	I installed my wife's x intake on her fa5 today and wanted to remind people that want to have the "x intake" sticker on the black rubber hose then you may want to be careful. They're pretty delicate.