R18 NST pulley kit DIY - Page 6

Show Stoppa FG1 · 05-11-2008, 12:27 AM

i still havent gotten mine, i cant wait to put it in. ive been reading the DIY's it seems easy enough.. me n lke 2 of my friends are gonna tackle it!

yeaitsanLX · 05-11-2008, 02:43 AM

i'm glad no1 had any major problems with this, now i can buy and install this thing in peace. I guess the bird chirping noise might be the only thing to worry about.

R18Civic · 05-13-2008, 11:32 AM

having a problem removing the belt. I've removed those three bolts to remove the alternator and nothing is moving and the belt is still tight. HELP PLZ!!!

Show Stoppa FG1 · 05-14-2008, 12:34 AM

Got Mine In Today, Just Finished It, Went On A Test Run, The Switching Between Gears Feels Sooooo Much Better And The Idile Is Better Too.

JeShUa · 05-14-2008, 12:45 AM

Care to elaborate?

Show Stoppa FG1 · 05-14-2008, 12:49 AM

like before when the motor was switching through gears there was like a slight delay, and u could tell the car shifted, now it just like rolls over to the next gear, u know how after u been pushing it and when u stop at a light, the rpms go way low and the car feels like its bout to stall? well not n e more, it stays there at w/e the rpm is at i think mine idols at like 745 or so, ill have to look at my scan guage again, but it does dip low n e more. the rpms jump high when u step on it. i like it, i hope i continue to like it

Show Stoppa FG1 · 05-14-2008, 12:50 AM

enough elaboration for u?

RCHamel3 · 05-15-2008, 11:25 PM

Is the best way to go getting the 3 piece kit or just the underdrive crank pulley? I'm looking for performance and not really a huge stereo system but do the pulleys work best with all three?

Show Stoppa FG1 · 05-16-2008, 02:21 AM

picture it this way, the more u can free up, the better the result. the crank is the most important. but i say do all 3

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/engine/29230-r18-nst-pulley-kit-diy.html
Posted By	For	Type	Date
NST pulleys - 8th Generation Honda Civic Forum	This thread	Refback	01-22-2008 04:38 PM
R18 NST pulley kit DIY - Page 3 - 8th Generation Honda Civic Forum	This thread	Refback	01-07-2008 02:02 PM
R18 NST pulley kit DIY - 8th Generation Honda Civic Forum	This thread	Refback	12-14-2007 05:39 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NST tuning pulley kit	rw_blaze	Forced Induction And Nitrous	55	05-15-2008 06:08 PM
DIY ** NST Civic SI underdrive pulleys	MADDOGSI	Engine	144	05-14-2008 12:39 AM
DIY: Injen CAI install on R18 (lots of pics)	peliROJO	Engine	67	02-13-2008 01:49 AM
NonStopTuning (NST) K20 SI Kit DIY, Pics, Dynos...	8civic	Engine	83	12-28-2007 10:25 PM
NST for R18	mfinlay04	Bolt-Ons And All-Motor	0	01-18-2007 02:15 PM

05-11-2008, 12:27 AM	#101 (permalink)
Show Stoppa FG1 Senior Member Join Date: Feb 2008 Location: Spring Valley New York Age: 20 Posts: 171 Garrick Mundy iTrader: 0 / 0%	i still havent gotten mine, i cant wait to put it in. ive been reading the DIY's it seems easy enough.. me n lke 2 of my friends are gonna tackle it!

05-11-2008, 02:43 AM	#102 (permalink)
yeaitsanLX Junior Member Join Date: Oct 2007 Location: Florida Posts: 15 Nasif iTrader: 0 / 0%	i'm glad no1 had any major problems with this, now i can buy and install this thing in peace. I guess the bird chirping noise might be the only thing to worry about.

05-13-2008, 11:32 AM	#103 (permalink)
R18Civic Senior Member Join Date: Jan 2008 Location: NC Posts: 360 Nate iTrader: 1 / 100%	having a problem removing the belt. I've removed those three bolts to remove the alternator and nothing is moving and the belt is still tight. HELP PLZ!!!

05-14-2008, 12:34 AM	#104 (permalink)
Show Stoppa FG1 Senior Member Join Date: Feb 2008 Location: Spring Valley New York Age: 20 Posts: 171 Garrick Mundy iTrader: 0 / 0%	Got Mine In Today, Just Finished It, Went On A Test Run, The Switching Between Gears Feels Sooooo Much Better And The Idile Is Better Too.

05-14-2008, 12:45 AM	#105 (permalink)
JeShUa Senior Member Join Date: Apr 2006 Age: 20 Posts: 11,562 get like me iTrader: 11 / 100%	Care to elaborate?

05-14-2008, 12:49 AM	#106 (permalink)
Show Stoppa FG1 Senior Member Join Date: Feb 2008 Location: Spring Valley New York Age: 20 Posts: 171 Garrick Mundy iTrader: 0 / 0%	like before when the motor was switching through gears there was like a slight delay, and u could tell the car shifted, now it just like rolls over to the next gear, u know how after u been pushing it and when u stop at a light, the rpms go way low and the car feels like its bout to stall? well not n e more, it stays there at w/e the rpm is at i think mine idols at like 745 or so, ill have to look at my scan guage again, but it does dip low n e more. the rpms jump high when u step on it. i like it, i hope i continue to like it

05-14-2008, 12:50 AM	#107 (permalink)
Show Stoppa FG1 Senior Member Join Date: Feb 2008 Location: Spring Valley New York Age: 20 Posts: 171 Garrick Mundy iTrader: 0 / 0%	enough elaboration for u?

05-15-2008, 11:25 PM	#108 (permalink)
RCHamel3 Member Join Date: Nov 2007 Location: NJ Age: 22 Posts: 48 Rob iTrader: 0 / 0%	Is the best way to go getting the 3 piece kit or just the underdrive crank pulley? I'm looking for performance and not really a huge stereo system but do the pulleys work best with all three?

05-16-2008, 02:21 AM	#109 (permalink)
Show Stoppa FG1 Senior Member Join Date: Feb 2008 Location: Spring Valley New York Age: 20 Posts: 171 Garrick Mundy iTrader: 0 / 0%	picture it this way, the more u can free up, the better the result. the crank is the most important. but i say do all 3

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)