NST Pulley Update!!! - Page 2

60103 · 03-31-2007, 07:11 PM

i just ordered the crank pulley, and not the alt pulley about 2 or 3 days ago, is my eta also 4-5 weeks?

***qwerty :)*** · 03-31-2007, 07:27 PM

group buy!

MADDOGSI · 03-31-2007, 08:44 PM

Quote:

Originally Posted by 60103

i just ordered the crank pulley, and not the alt pulley about 2 or 3 days ago, is my eta also 4-5 weeks?

IT takes a bit of time for NST to tool up to machine the pulley. I would say at least 3 weeks for now.I really recommend getting the alt and idler.with the crank pulley you may experience an occasional dimming of light at low rpm.the alt pulley corrects this and makes for more stable charging.then the idler pulley keeps you from needing to get a different belt and looks really good up top.

Tom1222 · 03-31-2007, 09:08 PM

Wouldn't it be beneficial for them to list a "KIT" price now even thou they don't have the Idler pulley in production yet. That way people could start ordering the kit with the forwarning that it will be about 3-4 weeks before they will receive the product. At least they would see how many people would be interested and base their production on that number.
They should have some idea what they will be charging for the kit?!

There is a group buy for the UR pulley kit under way which is $200 bucks but I would prefer the NST pulleys and I think they are worth the wait.

WhiteSicivic06 · 03-31-2007, 09:56 PM

Quote:

Originally Posted by Tom1222

Wouldn't it be beneficial for them to list a "KIT" price now even thou they don't have the Idler pulley in production yet. That way people could start ordering the kit with the forwarning that it will be about 3-4 weeks before they will receive the product. At least they would see how many people would be interested and base their production on that number.
They should have some idea what they will be charging for the kit?!

There is a group buy for the UR pulley kit under way which is $200 bucks but I would prefer the NST pulleys and I think they are worth the wait.

Same here, these are definantely worth the wait, however theres gotta be some ballpark figure. So were probably looking at least 2-3 months before there kits available? NST needs to buy another machine shop and start cranking these out like krispy kremes!

Tom1222 · 03-31-2007, 10:16 PM

Quote:

Originally Posted by WhiteSicivic06

Same here, these are definantely worth the wait, however theres gotta be some ballpark figure. So were probably looking at least 2-3 months before there kits available? NST needs to buy another machine shop and start cranking these out like krispy kremes!

Yumm, Krispy Creme's

I agree.. why does it take soooo long to crank out a few hundred pullies?
They should contract somebody to get it done and done a little quicker.

My guess would be that the kit will run about $250-275. Anything higher and they will price themselves out of the market. UR sells their kits for around $200 shipped when there is a group buy. I would be willing to pay $250 for the NST kit.

ABM JDM · 03-31-2007, 11:15 PM

NST's R18 kit is $255... I'd be down for a group buy of anywhere between $200-$255. So how about it? Anyone check it out w/ Mike on AIM yet?

8civic · 04-01-2007, 12:24 AM

Quote:

Originally Posted by 8civic

The answers to all your questions are in one word: NSTonAIM

Look for Mike on AOL. He is the president of the company and can answer any question you can throw at him regarding pulleys.

NST FTW

Ok, I talked to Mike and he says that all 3 pulleys, crank alternator & idler, are going into production. They will all become in-stock items in about 5 or 6 weeks tops.

HE SAYS ANYONE WHO ORDERS THE CRANK AND ALTERNATOR PULLEY RIGHT NOW AS A PAIR WILL GET A FREE IDLER!

Go to the link bellow and order the following two pieces:
NST22015 & NST22022 $125 Crank & $88 Alternator

NST FTW

Tell me these guys don't care about our community

8civic · 04-01-2007, 12:27 AM

Quote:

Originally Posted by Tom1222

Yumm, Krispy Creme's

I agree.. why does it take soooo long to crank out a few hundred pullies?
They should contract somebody to get it done and done a little quicker.

I would be willing to pay $250 for the NST kit.

If you look on their website you will see that they have so many products listed. Over 100 pulleys in fact. They are constantly working on different pulleys and its not like they only build Civic stuff. Good things are worth the wait. And if they contracted the work out to someone else how would you know that the products would be built to proper specs and held in check?

And you don't have to pay $250 for their kit. $125 + $88 = $213. Buy them now and get a free idler. You can't beat that.

60103 · 04-19-2007, 03:00 PM

any updates maddogsi?

Civicn33b · 04-19-2007, 04:12 PM

are we looking at any kind of low mid and high range numbers on these things? increases in HP or tq?

Civicn33b · 04-19-2007, 04:13 PM

i know they are lighter weight but anything else?

eugenekim.net · 04-19-2007, 05:24 PM

ummmmmmmmmmmmm there are dynos posted.

Tom1222 · 04-19-2007, 11:58 PM

Quote:

Originally Posted by eugenekim.net

ummmmmmmmmmmmm there are dynos posted.

Dyno Numbers don't tell the whole story. The major gain with these are that they have less rotational mass and have a slight underdrive.
So you will see better overall performance and better pull mainly in the midrange where it counts. Top end performance will probably not see much of an increase but it will be an overall gain where you can feel it.

eugenekim.net · 04-20-2007, 07:35 AM

Quote:

Originally Posted by Tom1222

Dyno Numbers don't tell the whole story. The major gain with these are that they have less rotational mass and have a slight underdrive.
So you will see better overall performance and better pull mainly in the midrange where it counts. Top end performance will probably not see much of an increase but it will be an overall gain where you can feel it.

the guy above me asked for numbers...

Tom1222 · 04-20-2007, 09:34 AM

Quote:

Originally Posted by eugenekim.net

the guy above me asked for numbers...

HuH?

dezod · 04-20-2007, 03:04 PM

NST FTW! Great products and Mike is a SUPER guy

eugenekim.net · 04-20-2007, 03:34 PM

Quote:

Originally Posted by Tom1222

HuH?

do u not see the post two up from mine?

Civicn33b · 04-20-2007, 07:29 PM

regaurdless thanks tom for the info and eugen for being a wannabe mod

<~~ not a flame!

Tom1222 · 04-21-2007, 12:41 AM

I think it is a worthwhile mod. Every little bit helps and it is just another piece of the puzzle. I will place my order as soon as I get my Credit Cards paid down a bit. I went Mod crazy for a while and have to recouperate from my spending spree

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/engine-swaps-mounts-pulleys/32936-nst-pulley-update.html
Posted By	For	Type	Date
NST Pulley Update!!! - Page 4 - 8th Generation Honda Civic Forum	This thread	Refback	02-20-2008 05:39 AM
NST pulleys - 8th Generation Honda Civic Forum	This thread	Refback	01-27-2008 03:59 AM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NonStopTuning (NST) K20 SI Kit DIY, Pics, Dynos...	8civic	Engine	106	01-08-2012 07:05 PM
R18 NST pulley kit DIY	el_ben2	Engine	322	09-22-2011 08:35 PM
NST tuning pulley kit	rw_blaze	Engine Swaps, Mounts, Pulleys	62	05-01-2009 05:34 PM
Unorthodox Pulley Set for the SI...Info on Install.......	Dwn4nythng	Engine Swaps, Mounts, Pulleys	90	05-28-2008 05:19 PM
NST Pulley Question	spocheld	Engine Swaps, Mounts, Pulleys	4	03-07-2007 11:01 PM

03-31-2007, 07:11 PM	#21 (permalink)
60103 Senior Member Join Date: Apr 2006 Location: Bartlett, IL Age: 27 Posts: 202 Ken	i just ordered the crank pulley, and not the alt pulley about 2 or 3 days ago, is my eta also 4-5 weeks?

03-31-2007, 07:27 PM	#22 (permalink)
*qwerty :)* VIP Member Join Date: Nov 2006 Location: IE/SD Age: 24 Posts: 9,392 kyle	group buy!

03-31-2007, 09:08 PM	#24 (permalink)
Tom1222 Senior Member Join Date: Jul 2006 Location: Indianapolis, Indiana USA Posts: 3,094 Tom Smith	Wouldn't it be beneficial for them to list a "KIT" price now even thou they don't have the Idler pulley in production yet. That way people could start ordering the kit with the forwarning that it will be about 3-4 weeks before they will receive the product. At least they would see how many people would be interested and base their production on that number. They should have some idea what they will be charging for the kit?! There is a group buy for the UR pulley kit under way which is $200 bucks but I would prefer the NST pulleys and I think they are worth the wait.

03-31-2007, 11:15 PM	#27 (permalink)
ABM JDM Senior Member Join Date: Feb 2007 Location: Indianapolis, IN Posts: 328 JDABM fan	NST's R18 kit is $255... I'd be down for a group buy of anywhere between $200-$255. So how about it? Anyone check it out w/ Mike on AIM yet?

04-19-2007, 03:00 PM	#30 (permalink)
60103 Senior Member Join Date: Apr 2006 Location: Bartlett, IL Age: 27 Posts: 202 Ken	any updates maddogsi?

04-19-2007, 04:12 PM	#31 (permalink)
Civicn33b Senior Member Join Date: Mar 2007 Posts: 3,233 Josh	are we looking at any kind of low mid and high range numbers on these things? increases in HP or tq?

04-19-2007, 04:13 PM	#32 (permalink)
Civicn33b Senior Member Join Date: Mar 2007 Posts: 3,233 Josh	i know they are lighter weight but anything else?

04-19-2007, 05:24 PM	#33 (permalink)
eugenekim.net Senior Member Join Date: Jun 2006 Location: huntington beach, ca Age: 25 Posts: 1,882	ummmmmmmmmmmmm there are dynos posted.

04-20-2007, 03:04 PM	#37 (permalink)
dezod Junior Member Join Date: Jul 2005 Posts: 8	NST FTW! Great products and Mike is a SUPER guy

04-20-2007, 07:29 PM	#39 (permalink)
Civicn33b Senior Member Join Date: Mar 2007 Posts: 3,233 Josh	regaurdless thanks tom for the info and eugen for being a wannabe mod <~~ not a flame!

04-21-2007, 12:41 AM	#40 (permalink)
Tom1222 Senior Member Join Date: Jul 2006 Location: Indianapolis, Indiana USA Posts: 3,094 Tom Smith	I think it is a worthwhile mod. Every little bit helps and it is just another piece of the puzzle. I will place my order as soon as I get my Credit Cards paid down a bit. I went Mod crazy for a while and have to recouperate from my spending spree

Remove Advertisements Sponsored Links
8th Generation Honda Civic Forum Advertisement