www.grille-tech.com grill/mesh inserts

Sion0x · 12-30-2006, 04:27 AM

Anyone buy their 3 piece grill set for the 2 door? I remember seeing a car or two on here that had mesh, was wondering how the install was, instruction quality, etc.

Sion0x · 01-05-2007, 05:15 PM

Well just ordered the 3 piece grill, I'll post a write up when I put it on.

JeShUa · 01-05-2007, 05:26 PM

can I see a pic of the product? There are some cheap ones I've seen.. I hope you didnt get any of those

Kakashi · 01-05-2007, 05:39 PM

i hope you actually recieve these..

Sion0x · 01-05-2007, 09:10 PM

Well they're made by grillcraft, which I heard was good. Unfortunately, no pics of the ACTUAL product yet, only pictures of the mesh itself....not on the fg. Kinda shady, I know.

But I really want the meeeesshhhh. And if they don't get it, i'll spam their phone line and send them anthrax in the mail.

(jk on the anthrax)

06CivEXJon · 01-06-2007, 08:20 PM

Post pics when and if you get them.

si_civic · 01-06-2007, 11:21 PM

blech

xxmstajxx · 01-06-2007, 11:59 PM

CUSTOM WORK WAS DONE BY ME AND CAN DO SOMEONE ELSES IF THEY WANT IT FOR A SMALL PRICE IN SO. CALIFORNIA AREA. IT REQUIRES A LOT OF TIME AND LABOR...HFP BODY KIT WILL NOT FIT OVER GRILLCRAFT GRILLS UNLESS WORK IS DONE....PM ME OR EMAIL XXMSTAJXX@YAHOO.COM

Sion0x · 01-12-2007, 05:40 PM

Well, I DID receive the grill inserts from grillcraft. I was astounded at the firmness and quality.

The gloss black finish looks REALLY clean, almost like stock.

All the black stuff is shaving from cutting out the foglight inserts. Didn't clean it all off yet.

I was going to do a write-up for this, but it's REALLY straight forward, instructions are included, and if you can't use basic power tools and a screwdriver....no helping you there.

I say a great exterior mod for anyone looking to add a new look. (and more air for those of us with a CAI)

***Sleepy*** · 01-12-2007, 05:45 PM

ooooooo I want that.....

tomasro · 01-12-2007, 05:54 PM

anything for the sedan?

aki · 01-12-2007, 06:14 PM

Can u cut out those horizontal slats in the lower center grille, or do those need to be in there to attach the mesh?

Sion0x · 01-12-2007, 06:46 PM

Sedan: http://www.grille-tech.com/detail.html?prodid=11232

Yeah, the plastic center part you need to keep in place to attach the grill...

It's be REALLY hard to cut that thing out though. Honestly, you can't see the horizontal parts in person, it's only because I was up close with my camera.

xxmstajxx · 01-15-2007, 10:50 AM

yigger · 01-15-2007, 11:01 AM

Quote:

Originally Posted by xxmstajxx

it doesn't matter if you have fogs installed right?? does the mesh go into the holes in the corners???

yigger · 01-15-2007, 11:05 AM

ouch!! a whopping $140 for mesh grill...does the lower grill include the mesh for the fogs also??

audiophile · 01-15-2007, 05:12 PM

Hmm...

I wonder if I buy the upper grille insert for my Sedan would it delete my OEM grille?

I would like to see pics of that one especially...

gbae007 · 01-15-2007, 05:18 PM

I like the middle but the fog holes should have fog "lights" in it, or it runs the risk of rice-factor.

Sion0x · 01-15-2007, 07:52 PM

Well the fog "light" I cut out actually has a purpose, now more air gets to the intake.

I want to see the upper grill too, I'm curious to see what it would look like...

But I'm keeping mine with the JDM H

***[IVI]*** · 01-16-2007, 07:50 AM

Which color would look better on FBP? Black or silver? Can't decide.

12-30-2006, 04:27 AM	#1 (permalink)
Sion0x Senior Member Join Date: Dec 2006 Location: Tempe, AZ Age: 19 Posts: 373 Derek iTrader: 5 / 100%	www.grille-tech.com grill/mesh inserts Anyone buy their 3 piece grill set for the 2 door? I remember seeing a car or two on here that had mesh, was wondering how the install was, instruction quality, etc.

01-06-2007, 11:59 PM	#8 (permalink)
xxmstajxx Senior Member Member Join Date: Jul 2006 Location: From Cali.....Living In Vegas Age: 25 Posts: 732 John iTrader: 3 / 100%	CUSTOM HFP BODY KIT OVER GRILLCRAFT GRILL CUSTOM WORK WAS DONE BY ME AND CAN DO SOMEONE ELSES IF THEY WANT IT FOR A SMALL PRICE IN SO. CALIFORNIA AREA. IT REQUIRES A LOT OF TIME AND LABOR...HFP BODY KIT WILL NOT FIT OVER GRILLCRAFT GRILLS UNLESS WORK IS DONE....PM ME OR EMAIL XXMSTAJXX@YAHOO.COM

01-15-2007, 10:50 AM	#14 (permalink)
xxmstajxx Senior Member Member Join Date: Jul 2006 Location: From Cali.....Living In Vegas Age: 25 Posts: 732 John iTrader: 3 / 100%	MY GRILL AGAIN....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-05-2007, 05:15 PM	#2 (permalink)
Sion0x Senior Member Join Date: Dec 2006 Location: Tempe, AZ Age: 19 Posts: 373 Derek iTrader: 5 / 100%	Well just ordered the 3 piece grill, I'll post a write up when I put it on.

01-05-2007, 05:26 PM	#3 (permalink)
JeShUa Senior Member Join Date: Apr 2006 Posts: 12,223 Keepin` it Phresh iTrader: 11 / 100%	can I see a pic of the product? There are some cheap ones I've seen.. I hope you didnt get any of those

01-05-2007, 05:39 PM	#4 (permalink)
Kakashi Senior Member Join Date: Sep 2006 Location: Aurora CO Age: 21 Posts: 3,683 iTrader: 1 / 100%	i hope you actually recieve these..

01-05-2007, 09:10 PM	#5 (permalink)
Sion0x Senior Member Join Date: Dec 2006 Location: Tempe, AZ Age: 19 Posts: 373 Derek iTrader: 5 / 100%	Well they're made by grillcraft, which I heard was good. Unfortunately, no pics of the ACTUAL product yet, only pictures of the mesh itself....not on the fg. Kinda shady, I know. But I really want the meeeesshhhh. And if they don't get it, i'll spam their phone line and send them anthrax in the mail. (jk on the anthrax)

01-06-2007, 08:20 PM	#6 (permalink)
06CivEXJon Senior Member Join Date: Mar 2006 Location: Monument/Colorado Springs Colorado Posts: 4,385 Jon iTrader: 0 / 0%	Post pics when and if you get them.

01-06-2007, 11:21 PM	#7 (permalink)
si_civic Senior Member Join Date: Jul 2006 Location: B.C. ,Canada Age: 30 Posts: 4,608 A/Cst.D.F.Abate iTrader: 10 / 100%	blech

01-12-2007, 05:40 PM	#9 (permalink)
Sion0x Senior Member Join Date: Dec 2006 Location: Tempe, AZ Age: 19 Posts: 373 Derek iTrader: 5 / 100%	Well, I DID receive the grill inserts from grillcraft. I was astounded at the firmness and quality. The gloss black finish looks REALLY clean, almost like stock. All the black stuff is shaving from cutting out the foglight inserts. Didn't clean it all off yet. I was going to do a write-up for this, but it's REALLY straight forward, instructions are included, and if you can't use basic power tools and a screwdriver....no helping you there. I say a great exterior mod for anyone looking to add a new look. (and more air for those of us with a CAI)

01-12-2007, 05:45 PM	#10 (permalink)
*Sleepy* UnDeRcOvErHiPpIcHiCk Join Date: Jan 2006 Location: POOKSVILLE CAnada Age: 33 Posts: 9,627 Susan iTrader: 2 / 100%	ooooooo I want that.....

01-12-2007, 05:54 PM	#11 (permalink)
tomasro Senior Member Join Date: Aug 2005 Location: San Carlos, CA Age: 25 Posts: 1,502 Turner iTrader: 2 / 100%	anything for the sedan?

01-12-2007, 06:14 PM	#12 (permalink)
aki Senior Member Join Date: Jan 2006 Location: tehインターウェブ Age: 29 Posts: 4,346 Resident Si Sedan Hater iTrader: 4 / 100%	Can u cut out those horizontal slats in the lower center grille, or do those need to be in there to attach the mesh?

01-12-2007, 06:46 PM	#13 (permalink)
Sion0x Senior Member Join Date: Dec 2006 Location: Tempe, AZ Age: 19 Posts: 373 Derek iTrader: 5 / 100%	Sedan: http://www.grille-tech.com/detail.html?prodid=11232 Yeah, the plastic center part you need to keep in place to attach the grill... It's be REALLY hard to cut that thing out though. Honestly, you can't see the horizontal parts in person, it's only because I was up close with my camera.

01-15-2007, 11:05 AM	#16 (permalink)
yigger Senior Member Join Date: May 2006 Location: Nawlins, LA Age: 22 Posts: 327 iTrader: 0 / 0%	ouch!! a whopping $140 for mesh grill...does the lower grill include the mesh for the fogs also??

01-15-2007, 05:12 PM	#17 (permalink)
audiophile Senior Member Join Date: Nov 2006 Location: Minden, LA Age: 24 Posts: 1,707 Ben iTrader: 1 / 100%	Hmm... I wonder if I buy the upper grille insert for my Sedan would it delete my OEM grille? I would like to see pics of that one especially...

01-15-2007, 05:18 PM	#18 (permalink)
gbae007 Senior Member Join Date: Jun 2006 Location: Portland, Oregon Age: 27 Posts: 881 iTrader: 0 / 0%	I like the middle but the fog holes should have fog "lights" in it, or it runs the risk of rice-factor.

01-15-2007, 07:52 PM	#19 (permalink)
Sion0x Senior Member Join Date: Dec 2006 Location: Tempe, AZ Age: 19 Posts: 373 Derek iTrader: 5 / 100%	Well the fog "light" I cut out actually has a purpose, now more air gets to the intake. I want to see the upper grill too, I'm curious to see what it would look like... But I'm keeping mine with the JDM H

01-16-2007, 07:50 AM	#20 (permalink)
*[IVI]* I'm your Huckleberry Join Date: May 2006 Location: Columbus, Ohio Age: 31 Posts: 1,636 Bryan iTrader: 0 / 0%	Which color would look better on FBP? Black or silver? Can't decide.