how do i hook up a boost gauge?

habifg2si · 05-31-2009, 06:44 AM

can't seem to find this DIY. any help would be appreciated.

***p1904*** · 05-31-2009, 11:33 PM

hhhmmmm....

***obert*** · 05-31-2009, 11:46 PM

The one I have I ran the tube off of the side of the Super Charger right in the front off the hose that is already on there,and then one wire to constant power, one to a ignition power sorce and one to the ground.

Radicalblackcivic · 05-31-2009, 11:49 PM

with a T fitting run the vacum line taped of any of the lines on the throtle body

05-31-2009, 06:44 AM	#1 (permalink)
habifg2si Member Join Date: Jan 2009 Posts: 75 iTrader: 0 / 0%	how do i hook up a boost gauge? can't seem to find this DIY. any help would be appreciated.

05-31-2009, 11:46 PM	#3 (permalink)
*obert* # 1 Friend Whore Join Date: May 2007 Location: Seattle Wa Posts: 40,267 Robert iTrader: 100 / 100%	The one I have I ran the tube off of the side of the Super Charger right in the front off the hose that is already on there,and then one wire to constant power, one to a ignition power sorce and one to the ground. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HOW and WHERE to hook up A/F ratio Gauge?	JEA86	Mechanical Problems & Technical Chat	6	08-30-2008 01:43 PM
boost gauge	autox41	Forced Induction And Nitrous	10	08-10-2008 01:22 PM

05-31-2009, 11:33 PM	#2 (permalink)
*p1904* VIP Member Join Date: Sep 2008 Location: San D13go Posts: 16,026 Jr iTrader: 7 / 100%	hhhmmmm....

05-31-2009, 11:49 PM	#4 (permalink)
Radicalblackcivic Senior Member Join Date: Jul 2008 Location: San Antonio Posts: 1,479 iTrader: 14 / 100%	with a T fitting run the vacum line taped of any of the lines on the throtle body