changing low-beams on DX-G coupe

civic_dx-g · 07-24-2006, 11:14 PM

word to the wise:

in the manual Honda says to unscrew a phillips screw holding the inner fender in place. In reality (at least on my car), there is no screw but rather a pop-in clip, kind of like the ones that hold door panels in place. Took me a while to figure out that there was no screw hiding under the black top.

PoLiShPrInCe · 07-24-2006, 11:22 PM

07-24-2006, 11:14 PM	#1 (permalink)
civic_dx-g Member Join Date: Jul 2006 Posts: 58 iTrader: 0 / 0%	changing low-beams on DX-G coupe word to the wise: in the manual Honda says to unscrew a phillips screw holding the inner fender in place. In reality (at least on my car), there is no screw but rather a pop-in clip, kind of like the ones that hold door panels in place. Took me a while to figure out that there was no screw hiding under the black top.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how much of a pig is your car? weight list	webby	Garage	20	05-01-2008 01:30 PM
Torredo's DX Coupe video (CAI & muffler)	si_civic	Civic Coupe And Sedan	7	07-21-2006 02:46 PM

07-24-2006, 11:22 PM	#2 (permalink)
PoLiShPrInCe Senior Member Join Date: Dec 2005 Location: GTA, Canada Age: 28 Posts: 3,141 iTrader: 0 / 0%