06+ Civic Si Engine Dampening Power Stick (For the rest of you) - Page 2

***CorSport*** · 08-21-2007, 05:51 PM

^for sure, made to work in conjunction with the other or as a stand alone.

Tai

***CorSport*** · 08-21-2007, 06:36 PM

Bump.

I was at Ingalls today, should be available by Friday!

Tai

hondasi006 · 08-21-2007, 06:42 PM

dont these things along with the td lead to interior vibration noise, i have read and heard personally, not on the si though

***CorSport*** · 08-21-2007, 06:44 PM

^very slight, but yeah.

nevertofast · 08-21-2007, 08:06 PM

i actually put a flat piece of rubber under the mounting bracket plate and i have no vibration noise only vibration and only i can feel it

***Zeuceone*** · 08-21-2007, 08:12 PM

Quote:

Originally Posted by hondasi006

dont these things along with the td lead to interior vibration noise, i have read and heard personally, not on the si though

i dont know why people say this i have yet to experience any "vibration noise".

nevertofast · 08-21-2007, 08:14 PM

thats cuz thier ETD was delivered to them loose and they never tightened or adjusted it mine came loose i had hella vibration then i adjusted it accordingly

hondasi006 · 08-21-2007, 08:17 PM

agian i havnt had this complaint coming from an si owner. only ss and srt-4

bioevolve · 08-21-2007, 10:04 PM

Ordered.

I thought they were in stock?!?!?!

***CorSport*** · 08-22-2007, 02:10 PM

Quote:

Originally Posted by bioevolve

Ordered.

I thought they were in stock?!?!?!

Shit, sorry, my bad, honestly I copied part of the first page from my ETD thread and left the in stock part in there -- I apologize, its due for final production this week at ingalls.

Tai

nevertofast · 08-22-2007, 03:08 PM

damn tai that was kind of shady if it wasnt an accident well only one person paid so far so kudos for the crazy sales pitch

goixiz · 08-22-2007, 03:12 PM

You will certainly enjoy it but if you dont like the harshness then you may want to reconsider. I design a tranny pitch stop for the WRX and i have a lot of design and research time on it till i had to reduce the stiffness for those not t have NVH

MonkeyConQueso · 08-22-2007, 03:31 PM

Quote:

Originally Posted by nevertofast

damn tai that was kind of shady if it wasnt an accident well only one person paid so far so kudos for the crazy sales pitch

....NOT! (where's a :rolleyes: smiley when you need one)

Looks like I'll be putting this on hold until I get the Vibrant HF-Cat Header after a review or two...

***CorSport*** · 08-22-2007, 03:58 PM

Quote:

Originally Posted by nevertofast

damn tai that was kind of shady if it wasnt an accident well only one person paid so far so kudos for the crazy sales pitch

lol, yeah my bad -- seriously though, total mistake... not deliberate at all.

Tai

goixiz · 08-22-2007, 04:06 PM

darn is there another TAI here

06RALLYREDSI · 08-22-2007, 04:19 PM

is this the same as the TD stiffy or whats the diff??

bioevolve · 08-22-2007, 04:36 PM

Quote:

Originally Posted by CorSport

Shit, sorry, my bad, honestly I copied part of the first page from my ETD thread and left the in stock part in there -- I apologize, its due for final production this week at ingalls.

Tai

Cool, no prob.

***CorSport*** · 08-22-2007, 05:43 PM

Quote:

Originally Posted by 06RALLYREDSI

is this the same as the TD stiffy or whats the diff??

This replaces the dog bone stock part where the other stiffy is in addition to the dog bone. Both products can be used together or separately.

Tai

JosueSI · 08-25-2007, 01:51 AM

dog bone ? pic of that please ? lol

SiRyan · 08-25-2007, 01:58 AM

This is the stock dogbone that I believe its supposed to replace:

08-21-2007, 05:51 PM	#21 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 5,166 iTrader: 120 / 100%	^for sure, made to work in conjunction with the other or as a stand alone. Tai __________________ www.CorSportUSA.com Performance Aftermarket Parts Honda Performance, Defined.

08-21-2007, 06:36 PM	#22 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 5,166 iTrader: 120 / 100%	Bump. I was at Ingalls today, should be available by Friday! Tai __________________ www.CorSportUSA.com Performance Aftermarket Parts Honda Performance, Defined.

08-21-2007, 06:44 PM	#24 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 5,166 iTrader: 120 / 100%	^very slight, but yeah. __________________ www.CorSportUSA.com Performance Aftermarket Parts Honda Performance, Defined.

08-21-2007, 10:04 PM	#29 (permalink)
bioevolve Senior Member Join Date: Dec 2006 Location: Cape Coral, Florida Posts: 425 iTrader: 7 / 100%	Ordered. I thought they were in stock?!?!?! Last edited by bioevolve; 08-21-2007 at 10:19 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-21-2007, 06:42 PM	#23 (permalink)
hondasi006 Senior Member Join Date: May 2006 Posts: 1,131 iTrader: 0 / 0%	dont these things along with the td lead to interior vibration noise, i have read and heard personally, not on the si though

08-21-2007, 08:06 PM	#25 (permalink)
nevertofast Senior Member Join Date: Jun 2007 Posts: 728 iTrader: 1 / 100%	i actually put a flat piece of rubber under the mounting bracket plate and i have no vibration noise only vibration and only i can feel it

08-21-2007, 08:14 PM	#27 (permalink)
nevertofast Senior Member Join Date: Jun 2007 Posts: 728 iTrader: 1 / 100%	thats cuz thier ETD was delivered to them loose and they never tightened or adjusted it mine came loose i had hella vibration then i adjusted it accordingly

08-21-2007, 08:17 PM	#28 (permalink)
hondasi006 Senior Member Join Date: May 2006 Posts: 1,131 iTrader: 0 / 0%	agian i havnt had this complaint coming from an si owner. only ss and srt-4

08-22-2007, 03:08 PM	#31 (permalink)
nevertofast Senior Member Join Date: Jun 2007 Posts: 728 iTrader: 1 / 100%	damn tai that was kind of shady if it wasnt an accident well only one person paid so far so kudos for the crazy sales pitch

08-22-2007, 03:12 PM	#32 (permalink)
goixiz Senior Member Join Date: Aug 2007 Posts: 124 iTrader: 1 / 100%	You will certainly enjoy it but if you dont like the harshness then you may want to reconsider. I design a tranny pitch stop for the WRX and i have a lot of design and research time on it till i had to reduce the stiffness for those not t have NVH

08-22-2007, 04:06 PM	#35 (permalink)
goixiz Senior Member Join Date: Aug 2007 Posts: 124 iTrader: 1 / 100%	darn is there another TAI here

08-22-2007, 04:19 PM	#36 (permalink)
06RALLYREDSI Senior Member Join Date: May 2006 Location: CENTRAL,CALI Posts: 820 K20 rocket iTrader: 0 / 0%	is this the same as the TD stiffy or whats the diff??

08-25-2007, 01:51 AM	#39 (permalink)
JosueSI Senior Member Join Date: Sep 2006 Location: Cary, North Carolina Posts: 151 iTrader: 0 / 0%	dog bone ? pic of that please ? lol

08-25-2007, 01:58 AM	#40 (permalink)
SiRyan Senior Member Join Date: Aug 2006 Location: Vallejo,Ca. Age: 23 Posts: 5,568 iTrader: 16 / 100%	This is the stock dogbone that I believe its supposed to replace:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2006 Civic Engine: I-VTEC	webby	Garage	8	10-15-2007 11:54 PM
2006 Honda Civic Engine Information	webby	Garage	4	08-04-2005 01:53 PM
2006 honda world news	webby	Garage	0	07-25-2005 09:31 AM