New 06+ Civic Si P2R Throttle Body Spacer - Page 31

vlcmdude · 01-12-2009, 09:46 PM

Definitely considering getting these, but exactly how tight is the fitment with an Injen CAI?

***jsnymeyer*** · 01-12-2009, 09:50 PM

VERY tight. You need to get a bent radiator hose for it to fit properly. We shaved down the elbow and removed the bottom bracket from the batter for more room, and it's still snug.

***CorSport*** · 01-21-2009, 05:33 PM

Quote:

Originally Posted by CorSport

2006 Civic Si P2R Throttle Body Spacer
CorSport Online Store: Honda - 06+ Civic - P305B

Increase torque (*2.4 ft.lbs) & horsepower (*4.5 whp) with P2R ¾” inch thick throttle body spacer. Comes with 1/8 NPT threaded port at bottom, that can be used an extra vacuum port, or can even be used for Nitrous. Includes extended bolts and plug, and polished for a show quality finish.

*Dyno link: P2R TB Spacer Dyno - 8th Generation Honda Civic Forum

Thanks for everyones continued support,
Tai and Remy
CorSport

We added the option for 2 gaskets at a lower price for the spacer:
CorSport Online Store: P2R - P2r06si

In stock

B-b0y · 01-23-2009, 05:17 AM

Does it come w/ new gasket(s)? I'm thinkin' not... so I'll need two right?

***CorSport*** · 01-23-2009, 11:58 AM

Quote:

Originally Posted by B-b0y

Does it come w/ new gasket(s)? I'm thinkin' not... so I'll need two right?

2 is recommended for maximum cooling, you only need 1 for install.

B-b0y · 01-23-2009, 01:21 PM

Quote:

Originally Posted by CorSport

2 is recommended for maximum cooling, you only need 1 for install.

Just ordered one w/ 2 gaskets! Please let me know when it goes out... THANKS!!

***CorSport*** · 01-29-2009, 01:24 AM

Bump. In stock.

***CorSport*** · 01-30-2009, 06:19 PM

Quote:

Originally Posted by CorSport

2006 Civic Si P2R Throttle Body Spacer
CorSport Online Store: Honda - 06+ Civic - P305B

Increase torque (*2.4 ft.lbs) & horsepower (*4.5 whp) with P2R ¾” inch thick throttle body spacer. Comes with 1/8 NPT threaded port at bottom, that can be used an extra vacuum port, or can even be used for Nitrous. Includes extended bolts and plug, and polished for a show quality finish.

*Dyno link: P2R TB Spacer Dyno - 8th Generation Honda Civic Forum

Thanks for everyones continued support,
Tai and Remy
CorSport

We added the option for 2 gaskets at a lower price for the spacer:
CorSport Online Store: P2R - P2r06si

In stock ready to ship.

jeiarneesi · 02-07-2009, 07:50 PM

Quote:

Originally Posted by CorSport

In stock ready to ship.

woot just ordered yesterday ^_^

Power Rev Racing · 02-24-2009, 01:51 PM

Hey Remy, You should update the picture on the 1st page.

Power Rev Racing · 03-08-2009, 11:56 AM

Tons in stock

civicsigary · 03-12-2009, 08:48 AM

Throttle body spacers, and gaskets will help reduce intake air temps by removing the direct connection of the throttle body to the intake manifold. By adding a gasket to each side of the TB Spacer you will reduce the engine temperature taken into te intake manifold. In conclusion this will add between 2-5 HP.

OrdnanceMarine · 03-12-2009, 01:10 PM

Quote:

Originally Posted by civicsigary

Throttle body spacers, and gaskets will help reduce intake air temps by removing the direct connection of the throttle body to the intake manifold. By adding a gasket to each side of the TB Spacer you will reduce the engine temperature taken into te intake manifold. In conclusion this will add between 2-5 HP.

A throttle body spacer itself will have no effect on the transfer of heat from the intake manifold to the throttle body (and back) unless it's made of some sort of material that doesn't conduct heat as well as aluminum. Also, consider the fact that your throttle body is heated with coolant much more directly than the intake manifold so.....unless you have an intake manifold gasket to keep the intake manifold cooler your throttle body gaskets aren't doing anything but providing a seal and adding slightly to the overall length of the throttle body spacer assembly.

So, the moral of the story is that you should be buying a P2R Intake Manifold Gasket to complement your P2R TBS and TBGs!

***CorSport*** · 03-12-2009, 01:27 PM

Bump.

***CorSport*** · 03-16-2009, 05:35 PM

Bump, best selling power adder for 8thgens we have.

Tai

KDarbs20z3 · 03-23-2009, 12:10 AM

ive seen a dyno of this tbs with a cai n it showed that the intake was pretty much useless bc there wasnt more than a 5 hp gain..

anyone have this with a cold air intake that can disprove this?

jdmcoupe · 03-23-2009, 12:32 AM

ill be getting another one soon (had to sell the last one i bought)

iCeMaN57 · 03-23-2009, 01:40 AM

Bought from CorSport last week the case of RP 5w30 came in bf they even gave me a tracking number!! Bump for a good company!!

Kjep64 · 04-02-2009, 01:36 AM

Sorry if this question has already been asked/answered and esp. if it's a newb question. Just registered, will work on profile later. Proud owner of 2008 civic si, just now modding.

With the threaded port at the bottom of the tb spacer wont that run the risk of sucking up dirt or other crap if it's not in use?

K20Redline · 04-02-2009, 04:13 AM

Quote:

Originally Posted by Kjep64

Sorry if this question has already been asked/answered and esp. if it's a newb question. Just registered, will work on profile later. Proud owner of 2008 civic si, just now modding.

With the threaded port at the bottom of the tb spacer wont that run the risk of sucking up dirt or other crap if it's not in use?

The port is not complete it is just a little dent that you can drill through if you decide to use it!

01-23-2009, 05:17 AM	#604 (permalink)
B-b0y Senior Member Join Date: Apr 2008 Location: NorCal 707 Posts: 1,228 Bee	Does it come w/ new gasket(s)? I'm thinkin' not... so I'll need two right? Last edited by B-b0y; 01-23-2009 at 05:19 AM.

01-29-2009, 01:24 AM	#607 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 10,204	Bump. In stock. __________________ www.CorSportUSA.com <-- tuner specific parts, free shipping in the USA. www.VSpeedUSA.com <-- every car, tons of parts, worldwide shipping. Online Aftermarket Performance Parts, Defined.

03-12-2009, 01:27 PM	#614 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 10,204	Bump. __________________ www.CorSportUSA.com <-- tuner specific parts, free shipping in the USA. www.VSpeedUSA.com <-- every car, tons of parts, worldwide shipping. Online Aftermarket Performance Parts, Defined.

03-16-2009, 05:35 PM	#615 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 10,204	Bump, best selling power adder for 8thgens we have. Tai __________________ www.CorSportUSA.com <-- tuner specific parts, free shipping in the USA. www.VSpeedUSA.com <-- every car, tons of parts, worldwide shipping. Online Aftermarket Performance Parts, Defined.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-12-2009, 09:46 PM	#601 (permalink)
vlcmdude Senior Member Join Date: Nov 2008 Location: SoCal Age: 21 Posts: 500 RJ	Definitely considering getting these, but exactly how tight is the fitment with an Injen CAI?

01-12-2009, 09:50 PM	#602 (permalink)
*jsnymeyer* Long live Webby's 8th Join Date: Jan 2008 Location: Tampa Bay Age: 25 Posts: 32,110 Jared/JRod/JRok/JDizzie, etc..	VERY tight. You need to get a bent radiator hose for it to fit properly. We shaved down the elbow and removed the bottom bracket from the batter for more room, and it's still snug.

02-24-2009, 01:51 PM	#610 (permalink)
Power Rev Racing Senior Member Join Date: Sep 2006 Location: Miami FL Posts: 135 Sean	Hey Remy, You should update the picture on the 1st page.

03-08-2009, 11:56 AM	#611 (permalink)
Power Rev Racing Senior Member Join Date: Sep 2006 Location: Miami FL Posts: 135 Sean	Tons in stock

03-12-2009, 08:48 AM	#612 (permalink)
civicsigary Member Join Date: Feb 2009 Location: Blackwood Age: 21 Posts: 31 Gary	Throttle body spacers, and gaskets will help reduce intake air temps by removing the direct connection of the throttle body to the intake manifold. By adding a gasket to each side of the TB Spacer you will reduce the engine temperature taken into te intake manifold. In conclusion this will add between 2-5 HP.

03-23-2009, 12:10 AM	#616 (permalink)
KDarbs20z3 Member Join Date: Sep 2008 Location: New York Posts: 42 Darbs	ive seen a dyno of this tbs with a cai n it showed that the intake was pretty much useless bc there wasnt more than a 5 hp gain.. anyone have this with a cold air intake that can disprove this?

03-23-2009, 12:32 AM	#617 (permalink)
jdmcoupe Senior Member Join Date: Feb 2007 Location: R.I.P FG2 You Will be Missed Age: 27 Posts: 1,818 Roy	ill be getting another one soon (had to sell the last one i bought)

03-23-2009, 01:40 AM	#618 (permalink)
iCeMaN57 Senior Member Join Date: Jul 2008 Location: Louisville Posts: 8,243 David	Bought from CorSport last week the case of RP 5w30 came in bf they even gave me a tracking number!! Bump for a good company!!

04-02-2009, 01:36 AM	#619 (permalink)
Kjep64 Junior Member Join Date: Apr 2009 Location: La Crosse, WI Posts: 16 The Koreans	Sorry if this question has already been asked/answered and esp. if it's a newb question. Just registered, will work on profile later. Proud owner of 2008 civic si, just now modding. With the threaded port at the bottom of the tb spacer wont that run the risk of sucking up dirt or other crap if it's not in use?

Remove Advertisements Sponsored Links
8th Generation Honda Civic Forum Advertisement

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/corsport/42928-new-06-civic-si-p2r-throttle-body-spacer.html
Posted By	For	Type	Date
New 06+ Civic Si P2R Throttle Body Spacer - Page 2 - 8th Generation Honda Civic Forum	This thread	Refback	02-04-2008 03:59 PM
New 06+ Civic Si P2R Throttle Body Spacer - Page 30 - 8th Generation Honda Civic Forum	This thread	Refback	12-17-2007 01:33 PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 2007 Honda Civic Si Sedan press release	skittleslegend	8thcivic.com Site News	77	11-04-2007 10:23 AM
Coolant Lines for heating throttle body.	TampaSi07	Bolt-Ons And All-Motor	5	04-18-2007 01:07 PM
Just a thought about our throttle body	legendman	Civic SI	12	10-02-2006 02:12 PM