06+ Civic Si Skunk2 Pro Series Intake Manifold

[CorSport]

Look what will be out next week So nice looking.



CorSport Online Store: Honda - 06+ Civic - 307-05-0310
06+ Civic Si Skunk2 Pro Series Intake Manifold






Skunk2’s Pro Series Intake Manifold for Honda’s K-series has arrived. Skunk2 engineers looked to the popular ’06+ Civic Si’s RBC intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold for Honda’s K-series features a larger plenum and shorter, oversized runners when compared to the RBC, and is cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.


Skunk2’s all-new, cast-aluminum Pro Series Intake Manifold for Honda’s K-series is a direct-fit replacement for all K20/K24 engines thanks to its unique, patent-pending water neck design and throttle body flange, which is compatible with OEM throttle bodies as well as those as large as 76mm (’06+ Civic Si requires adapter, sold separately). The special water neck design eliminates the cutting that would otherwise be involved with some RBC applications (remaining applications require special 1.0 x 11.5-inch NPT plug, sold separately), and the supplied thermal-insulated intake manifold gasket makes for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on ’88-’00 Civics and ’90-’01 Integras with K-series engine swaps, as well as additional core support clearance on ’02-’05 Civic Sis.


Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power.


Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded and CNC-machined for superior strength, a precise fit, and a high-quality finish. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out.







Thanks,
CorSport

[silverspoon1996]

how about skunk2 steps up and shows some dyno numbers?

[mitsukaiSI]

man skunk2 has been busy lately weve had SOOO much stuff drop for our cars in the last three months i wonder if it makes all the people who "jumped ship" sad/regret trading their car in

[Zeuceone]

naice. they should put dyno numbers out...

[danielg]

when will you guys be getting them in?

[mattyv]

yesssssssssssssssssssssssssssssssss!

but yea... dyno numbers please?

[LakewoodSI2007]

Omg!!!!!

will a p2r TBS bolt directly to this?

[1 Sweet SI]

bump cant wait!!

[obert]

Great looking part

[mattyv]

Originally Posted by LakewoodSI2007

Omg!!!!!

will a p2r TBS bolt directly to this?

skunk2 website says its 70mm opening... so im not sure if you would want to

is the p2r the same diameter as the stock throttle body?

[hiphopsi]

... i too would like 2 see dyno numbers aswell as a price??? and for the adapter????

[ernestjohnson1]

i might be getting this on the 14th what gains are expected from this

[CorSport]

Ok, so you need an adaptor that has not been made yet to fit this manifold. on 06 civics

[midnitesi]

how much extra hp is this expected to deliver

[Zeuceone]

adapter for the coolant?

[CorSport]

Originally Posted by Zeuceone

adapter for the coolant?

No,

Something like that but made so your TBs fit that manifold

[Zeuceone]

i see. that should be to dificult to make.

[midnitesi]

should offer the adapter at a discount to those who purchase the im....but again...will p2r work in place of said adaper

[slammedRRcoupe]

only if there was a throttle body to be paired with this that didn't cost an arm and a leg. I'm glad to see that there is an aftermarket IM though.

[CorSport]

Originally Posted by midnitesi

should offer the adapter at a discount to those who purchase the im....but again...will p2r work in place of said adaper

When 1 is made we will have them for sale