Hey Tai how about some ureathane bushings?

King Bob · 12-18-2008, 12:32 AM

Hey corsport, I know you guys have manufacturing contacts for some good stuff like you brake lines and shifter bushings ( which I run both). I was wondering if you guys might be able to bring some urethane bushings to market if enough guys around here were interested. The 06'ers getting some miles on them now and I think a refresh might be in order soon for some of us. I hope I am not out of line posting in your section like this and asking for something like this but I figured you would be the best guys to ask.

TUsi · 12-21-2008, 09:17 PM

Why not just go for nylon bushings?

King Bob · 12-21-2008, 11:16 PM

that would be good to, ... i think you missed the point though, there are no bushing kits for our cars yet as far as I know.

TUsi · 12-23-2008, 07:20 PM

oooh, i know. The only knock I have on my civic is that it's too new.

I was kind of hoping Tai would see it

no deflection is better than rubber any day of the week if you're not the passenger lol.

***CorSport*** · 12-24-2008, 12:46 PM

Which bushings?

King Bob · 12-24-2008, 03:11 PM

i was thinking something along the lines of this CorSport Online Store: Honda - 02-05 Civic Si - 1618112G

***CorSport*** · 12-24-2008, 03:52 PM

yikes, thats gonna be a ways out imo. lest put it this way, that kit for the ep3 has been out forever and is STILL listed on the ES new products page... NEW Product Page 1

They never update their page or product line anymore that I can tell.

Tai

King Bob · 12-24-2008, 03:58 PM

that's cool figured it couldn't hurt to ask.

torch02si · 02-10-2009, 09:35 PM

Interested in these too...full autocross season on R-Comps, back bumpy roads and 45,000 miles have taken their toll. She is feeling "tired". The current Blizzaks on OEMs isn't helping feel...but it would be nice to have a little refresh on some components before Spring...sorry to dig up a dead thread, just wanted to show continued interest in this type of product.

12-18-2008, 12:32 AM	#1 (permalink)
King Bob Senior Member Join Date: Oct 2006 Age: 27 Posts: 635 Houma, Louisiana iTrader: 1 / 100%	Hey Tai how about some ureathane bushings? Hey corsport, I know you guys have manufacturing contacts for some good stuff like you brake lines and shifter bushings ( which I run both). I was wondering if you guys might be able to bring some urethane bushings to market if enough guys around here were interested. The 06'ers getting some miles on them now and I think a refresh might be in order soon for some of us. I hope I am not out of line posting in your section like this and asking for something like this but I figured you would be the best guys to ask.

12-24-2008, 12:46 PM	#5 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 7,805 iTrader: 196 / 100%	Which bushings? __________________ www.CorSportUSA.com Performance Aftermarket Parts Honda Performance, Defined. *Check out www.SpringsOnly.com for your other vehicles.

12-24-2008, 03:52 PM	#7 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 7,805 iTrader: 196 / 100%	yikes, thats gonna be a ways out imo. lest put it this way, that kit for the ep3 has been out forever and is STILL listed on the ES new products page... NEW Product Page 1 They never update their page or product line anymore that I can tell. Tai __________________ www.CorSportUSA.com Performance Aftermarket Parts Honda Performance, Defined. *Check out www.SpringsOnly.com for your other vehicles.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tai Help....	Englishe30	CorSport	7	05-29-2007 07:19 PM
Tai?	si_civic	CorSport	0	03-03-2007 05:14 PM

12-21-2008, 09:17 PM	#2 (permalink)
TUsi Member Join Date: Feb 2008 Location: Fort Washington, PA Posts: 56 iTrader: 0 / 0%	Why not just go for nylon bushings?

12-21-2008, 11:16 PM	#3 (permalink)
King Bob Senior Member Join Date: Oct 2006 Age: 27 Posts: 635 Houma, Louisiana iTrader: 1 / 100%	that would be good to, ... i think you missed the point though, there are no bushing kits for our cars yet as far as I know.

12-23-2008, 07:20 PM	#4 (permalink)
TUsi Member Join Date: Feb 2008 Location: Fort Washington, PA Posts: 56 iTrader: 0 / 0%	oooh, i know. The only knock I have on my civic is that it's too new. I was kind of hoping Tai would see it no deflection is better than rubber any day of the week if you're not the passenger lol.

12-24-2008, 03:11 PM	#6 (permalink)
King Bob Senior Member Join Date: Oct 2006 Age: 27 Posts: 635 Houma, Louisiana iTrader: 1 / 100%	i was thinking something along the lines of this CorSport Online Store: Honda - 02-05 Civic Si - 1618112G

12-24-2008, 03:58 PM	#8 (permalink)
King Bob Senior Member Join Date: Oct 2006 Age: 27 Posts: 635 Houma, Louisiana iTrader: 1 / 100%	that's cool figured it couldn't hurt to ask.

02-10-2009, 09:35 PM	#9 (permalink)
torch02si Senior Member Join Date: Jun 2006 Posts: 323 iTrader: 1 / 100%	Interested in these too...full autocross season on R-Comps, back bumpy roads and 45,000 miles have taken their toll. She is feeling "tired". The current Blizzaks on OEMs isn't helping feel...but it would be nice to have a little refresh on some components before Spring...sorry to dig up a dead thread, just wanted to show continued interest in this type of product.