70mm skunk2 exhaust gasket

k20z3danny · 12-04-2008, 01:28 AM

could i possibly buy the 70mm skunk2 exhaust gaskets from you guys?

***db8typer*** · 12-08-2008, 08:39 PM

^Your best bet may be to contact Skunk 2 directly.

civicmarc · 12-08-2008, 08:40 PM

.................

ShadowFox375 · 12-08-2008, 09:20 PM

i guess the true question is, can you get replacements at like autozone, Kragen or something like that? Mine are torn to crap

Overdosedvtec · 12-08-2008, 09:26 PM

Quote:

Originally Posted by ShadowFox375

i guess the true question is, can you get replacements at like autozone, Kragen or something like that? Mine are torn to crap

^^^i'd go with this suggestion.........

***CorSport*** · 12-09-2008, 05:11 PM

Yep. 2.5" standard domestic 3 hole gaskets work fine. AutoZone, etc.

SI-Doke · 04-19-2009, 01:13 PM

old thread...but, I measured my skunk2 gaskets and they had a 2.75" id...so shouldn't I use a 2.75" replacement gasket or will the 2.5 work??

09[MiNh]Si · 04-19-2009, 04:33 PM

id go to a parts store like kragen or autozone and get one. works the same.

***CorSport*** · 04-20-2009, 12:31 PM

Quote:

Originally Posted by SI-Doke

old thread...but, I measured my skunk2 gaskets and they had a 2.75" id...so shouldn't I use a 2.75" replacement gasket or will the 2.5 work??

the 70mm is a 2.75, you must get that size.

SI-Doke · 04-21-2009, 05:16 PM

thanks...I finally found some, just took a lot of shopping around

12-04-2008, 01:28 AM	#1 (permalink)
k20z3danny Senior Member Join Date: Apr 2008 Location: Louisville Posts: 408	70mm skunk2 exhaust gasket could i possibly buy the 70mm skunk2 exhaust gaskets from you guys?
	Tweet

12-09-2008, 05:11 PM	#6 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 10,204	Yep. 2.5" standard domestic 3 hole gaskets work fine. AutoZone, etc. __________________ www.CorSportUSA.com <-- tuner specific parts, free shipping in the USA. www.VSpeedUSA.com <-- every car, tons of parts, worldwide shipping. Online Aftermarket Performance Parts, Defined.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
70mm skunk2 exhaust gasket help please.	k20z3danny	Bolt-Ons And All-Motor	6	12-04-2008 02:09 PM
Skunk2 exhaust 70mm question?	o3Lz	Exhaust Discussion	3	10-07-2008 11:18 PM
BCRH + Skunk2 70mm exhaust ... exhaust leak	ASHRAF	Bolt-Ons And All-Motor	24	07-27-2008 05:13 PM
Anyone with a Skunk2 70mm exhaust	CanyonM28Si	Bolt-Ons And All-Motor	20	10-05-2007 08:08 PM
Skunk2 70mm Exhaust	mas3423	Bolt-Ons And All-Motor	13	09-03-2007 10:27 PM

12-08-2008, 08:39 PM	#2 (permalink)
*db8typer* VIP Member Join Date: Nov 2008 Location: Torrance/Southbay Area Posts: 14,427	^Your best bet may be to contact Skunk 2 directly.

12-08-2008, 08:40 PM	#3 (permalink)
civicmarc Senior Member Join Date: Feb 2008 Posts: 12,547 Señor Marcos	.................

12-08-2008, 09:20 PM	#4 (permalink)
ShadowFox375 Senior Member Join Date: Dec 2007 Location: 805 SB Posts: 153	i guess the true question is, can you get replacements at like autozone, Kragen or something like that? Mine are torn to crap

04-19-2009, 01:13 PM	#7 (permalink)
SI-Doke Member Join Date: Nov 2008 Location: FL Age: 24 Posts: 59 Erick	old thread...but, I measured my skunk2 gaskets and they had a 2.75" id...so shouldn't I use a 2.75" replacement gasket or will the 2.5 work??

04-19-2009, 04:33 PM	#8 (permalink)
09[MiNh]Si Senior Member Join Date: Dec 2008 Location: Sacramento Posts: 194	id go to a parts store like kragen or autozone and get one. works the same.

04-21-2009, 05:16 PM	#10 (permalink)
SI-Doke Member Join Date: Nov 2008 Location: FL Age: 24 Posts: 59 Erick	thanks...I finally found some, just took a lot of shopping around

Remove Advertisements Sponsored Links
8th Generation Honda Civic Forum Advertisement