K-Series Clutch and Flywheel PACKAGE DEAL

***CorSport*** · 06-17-2008, 05:57 PM

K-Series Exedy Clutch and ACT Flywheel Package DEAL
$530.00

This is a ONE TIME special that will last until our stock is gone.

CorSport Online Store: Honda - 08806/600295

PICK ONE CLUTCH:
Exedy Organic Stage I Clutch
EXEDY Racing clutches with organic friction materials use only premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines. The driveability will be like a stock clutch. Pedal efforts will be higher because of the higher clamp loads. All of our clutch discs have high capacity spring center dampers to reduce the drive train shock and impact.

OR

Exedy Cerametallic Stage II Clutch (Thick)
EXEDY cerametallic clutches are designed to handle the abuse of high power modified engines. The cerametallic friction material can handle much more slippage than stock type disc assemblies without slipping and fading.

All EXEDY cerametallic clutch discs have spring center dampers to reduce the impact and shock loads put into the drivetrain. This protects the transmission and the rest of the drive line system.

With any cerametalic clutch system, there will be some compromise of start up driveability as compared to a stock clutch (chatter on light throttle, low rpm start up). This characteristic is general felt to be acceptable in modified performance cars. Drivers of cerametallic clutches on the street should be warned not to "ride the clutch" to try to reduce the chatter as this will greatly increase the wear.

PICK ONE FLYWHEEL:

Exedy Lightweight Flywheel (9lbs)
Exedy Racing Flywheels are made from solid one-piece billet chrome moly steel or chrome moly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance the air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel which has the possibilities of separating from the flywheel. This could cause the flywheel to explode due to two different expansion coefficients (aluminum flywheel pressed on steel ring gear). EXEDY steel billet and forged steel flywheels have passed engineering tests to 15,000 rpm. They are guaranteed to be explosion proof at the said rpm.

OR

ACT - XACT StreetLite Flywheel (11.4lbs)
* Lighter and stronger than a stock flywheel
* Better driveability and durability
* Super rigid, precision made, and dynamically balanced
* Recommended for daily driving, street and drag racing

OR

ACT - XACT ProLite Flywheel (8.4lbs)
* Lightest XACT flywheel
* Best throttle response, lowest inertia
* Super rigid, precision made, and dynamically balanced
* Recommended for street, drag, road and rally racing

For but not limited to the following applications : K20A2,K20A3,K20Z1,K24A2,K24A4,K20Z3

CorSport Online Store: Honda - 08806/600295

We figured lets give back to the K-Series crowd and $500 stage 1 clutch and flywheel sets seemed more than appropriate, the stage 2 is even MORE of a deal. ENJOY!

CorSport Online Store: Honda - 08806/600295

^click to buy and pick your options

Thanks for the support and jump on the deal before its gone.
Tai
CorSport

smokenrowboy · 06-18-2008, 12:12 AM

Holy crap I was just thinking about buying a flywheel and then this shows up!

Bboy_Burst · 06-18-2008, 01:06 AM

how many do you currently have in stock??

to177SI · 06-18-2008, 01:07 AM

Hey Tai,

Do you have a package that comes with the Exedy 9lbs Flywheel?

***CorSport*** · 06-18-2008, 10:34 AM

Quote:

Originally Posted by to177SI

Hey Tai,

Do you have a package that comes with the Exedy 9lbs Flywheel?

Yes, check out the link above just added.

Tai

***CorSport*** · 06-18-2008, 10:34 AM

Quote:

Originally Posted by Bboy_Burst

how many do you currently have in stock??

LOTS.

reckywind · 06-22-2008, 02:26 PM

how much is shipping and how fast can you ship it to Socal? 91356

***CorSport*** · 06-22-2008, 10:52 PM

Quote:

Originally Posted by reckywind

how much is shipping and how fast can you ship it to Socal? 91356

Shipping is Free, ill even upgrade it to express saver -- a 2-3 day service, usually 3.

Tai

GALAXY~SI · 06-24-2008, 10:25 PM

Tai if you see this ill be ording the exedy stage 1 and the prolite tomorrow if you hook a brotha up with that express saver shipping lol

My clutch is done so its time for me to take it out

***CorSport*** · 06-25-2008, 11:39 AM

^^ Cool, No problem.

mix · 06-25-2008, 11:45 AM

wow does that stage 2 come with a pressure plate?? if so sign how do i buy? lol?

GALAXY~SI · 06-25-2008, 12:04 PM

Tai i spoke to remy ill order tonight money hasnt cleared in my account what time do you guys close

***CorSport*** · 06-25-2008, 12:13 PM

Quote:

Originally Posted by mix

wow does that stage 2 come with a pressure plate?? if so sign how do i buy? lol?

Yep, of course pressure plate included, Click the link in the first post to order!

Quote:

Originally Posted by GALAXY~SI

Tai i spoke to remy ill order tonight money hasnt cleared in my account what time do you guys close

-- 4PM EST for these to leave today if thats what you mean.

We race on wednesdays, so we leave early (3PM MST)

Tai

Lrg91 · 06-25-2008, 09:49 PM

Tai if you plan on having some instock buy friday Consider it Sold!

GALAXY~SI · 06-26-2008, 07:42 AM

Just Placed my order wondering if you guys can ship to my job instead of my house at my job from 9 to 5 everyday ain't home to receive package

whitecivicsi · 06-26-2008, 07:54 AM

I don't like u Tai.

Now it looks like i'll be buying this sometime in the near future now...even though I'm not looking for a new clutch or flywheel just yet.

Thxs

***CorSport*** · 06-26-2008, 09:41 AM

Quote:

Originally Posted by GALAXY~SI

Just Placed my order wondering if you guys can ship to my job instead of my house at my job from 9 to 5 everyday ain't home to receive package

For you, sure, since you have an established history with us. Be sure to call and remind us or email us ASAP.

Tai

GALAXY~SI · 06-26-2008, 01:28 PM

Tai I spoke to remy said thaat since it is my first purchse he can't

Kinda sucks I'm not home I work 930 to 5 neva home lol its ok

Tai think you can hook me up with tracking number so I know where it is atleast maybe tell my boy to sign for it

***CorSport*** · 06-26-2008, 01:33 PM

Quote:

Originally Posted by GALAXY~SI

Tai I spoke to remy said thaat since it is my first purchse he can't

Kinda sucks I'm not home I work 930 to 5 neva home lol its ok

Tai think you can hook me up with tracking number so I know where it is atleast maybe tell my boy to sign for it

I just read this thread and saw tai said we can do that for you, sorry.

I will change the address to your work address ASAP.

Remy

***CorSport*** · 06-26-2008, 01:49 PM

^thanks guys.

06-17-2008, 05:57 PM	#1 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 6,974 iTrader: 176 / 100%	K-Series Clutch and Flywheel PACKAGE DEAL K-Series Exedy Clutch and ACT Flywheel Package DEAL $530.00 *This is a ONE TIME special that will last until our stock is gone.* CorSport Online Store: Honda - 08806/600295 PICK ONE CLUTCH: Exedy Organic Stage I Clutch EXEDY Racing clutches with organic friction materials use only premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines. The driveability will be like a stock clutch. Pedal efforts will be higher because of the higher clamp loads. All of our clutch discs have high capacity spring center dampers to reduce the drive train shock and impact. OR Exedy Cerametallic Stage II Clutch (Thick) EXEDY cerametallic clutches are designed to handle the abuse of high power modified engines. The cerametallic friction material can handle much more slippage than stock type disc assemblies without slipping and fading. All EXEDY cerametallic clutch discs have spring center dampers to reduce the impact and shock loads put into the drivetrain. This protects the transmission and the rest of the drive line system. With any cerametalic clutch system, there will be some compromise of start up driveability as compared to a stock clutch (chatter on light throttle, low rpm start up). This characteristic is general felt to be acceptable in modified performance cars. Drivers of cerametallic clutches on the street should be warned not to "ride the clutch" to try to reduce the chatter as this will greatly increase the wear. PICK ONE FLYWHEEL: Exedy Lightweight Flywheel (9lbs) Exedy Racing Flywheels are made from solid one-piece billet chrome moly steel or chrome moly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance the air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel which has the possibilities of separating from the flywheel. This could cause the flywheel to explode due to two different expansion coefficients (aluminum flywheel pressed on steel ring gear). EXEDY steel billet and forged steel flywheels have passed engineering tests to 15,000 rpm. They are guaranteed to be explosion proof at the said rpm. OR ACT - XACT StreetLite Flywheel (11.4lbs) * Lighter and stronger than a stock flywheel * Better driveability and durability * Super rigid, precision made, and dynamically balanced * Recommended for daily driving, street and drag racing OR ACT - XACT ProLite Flywheel (8.4lbs) * Lightest XACT flywheel * Best throttle response, lowest inertia * Super rigid, precision made, and dynamically balanced * Recommended for street, drag, road and rally racing For but not limited to the following applications : K20A2,K20A3,K20Z1,K24A2,K24A4,K20Z3 CorSport Online Store: Honda - 08806/600295 *We figured lets give back to the K-Series crowd and $500 stage 1 clutch and flywheel sets seemed more than appropriate, the stage 2 is even MORE of a deal. ENJOY!* CorSport Online Store: Honda - 08806/600295 ^click to buy and pick your options Thanks for the support and jump on the deal before its gone. Tai CorSport __________________ www.CorSportUSA.com Performance Aftermarket Parts Honda Performance, Defined. *Check out www.SpringsOnly.com for your other vehicles.

06-24-2008, 10:25 PM	#9 (permalink)
GALAXY~SI Senior Member Join Date: Apr 2006 Location: Chester NY Age: 20 Posts: 12,065 Kurt iTrader: 17 / 100%	Tai if you see this ill be ording the exedy stage 1 and the prolite tomorrow if you hook a brotha up with that express saver shipping lol My clutch is done so its time for me to take it out Last edited by GALAXY~SI; 06-24-2008 at 10:42 PM.

06-25-2008, 11:39 AM	#10 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 6,974 iTrader: 176 / 100%	^^ Cool, No problem. __________________ www.CorSportUSA.com Performance Aftermarket Parts Honda Performance, Defined. *Check out www.SpringsOnly.com for your other vehicles.

06-26-2008, 01:49 PM	#20 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 6,974 iTrader: 176 / 100%	^thanks guys. __________________ www.CorSportUSA.com Performance Aftermarket Parts Honda Performance, Defined. *Check out www.SpringsOnly.com for your other vehicles.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-18-2008, 12:12 AM	#2 (permalink)
smokenrowboy Senior Member Join Date: Jun 2007 Location: Earth...for now Posts: 504 FMInterf00ler0_o iTrader: 6 / 100%	Holy crap I was just thinking about buying a flywheel and then this shows up!

06-18-2008, 01:06 AM	#3 (permalink)
Bboy_Burst Senior Member Join Date: Jul 2007 Location: Merced, CA Age: 22 Posts: 2,009 Most Powerful N/A SI iTrader: 2 / 100%	how many do you currently have in stock??

06-18-2008, 01:07 AM	#4 (permalink)
to177SI Senior Member Join Date: Mar 2007 Location: San Jose Posts: 1,808 To177 iTrader: 17 / 100%	Hey Tai, Do you have a package that comes with the Exedy 9lbs Flywheel?

06-22-2008, 02:26 PM	#7 (permalink)
reckywind Senior Member Join Date: Feb 2007 Location: San Dimas, CA Posts: 423 Erick Wiindsor iTrader: 1 / 100%	how much is shipping and how fast can you ship it to Socal? 91356

06-25-2008, 11:45 AM	#11 (permalink)
mix Senior Member Join Date: Mar 2006 Location: El Paso/Houston, TX Posts: 462 Chris iTrader: 1 / 100%	wow does that stage 2 come with a pressure plate?? if so sign how do i buy? lol?

06-25-2008, 12:04 PM	#12 (permalink)
GALAXY~SI Senior Member Join Date: Apr 2006 Location: Chester NY Age: 20 Posts: 12,065 Kurt iTrader: 17 / 100%	Tai i spoke to remy ill order tonight money hasnt cleared in my account what time do you guys close

06-25-2008, 09:49 PM	#14 (permalink)
Lrg91 Senior Member Join Date: Feb 2007 Location: Porterville Age: 18 Posts: 285 Adrian iTrader: 0 / 0%	Tai if you plan on having some instock buy friday Consider it Sold!

06-26-2008, 07:42 AM	#15 (permalink)
GALAXY~SI Senior Member Join Date: Apr 2006 Location: Chester NY Age: 20 Posts: 12,065 Kurt iTrader: 17 / 100%	Just Placed my order wondering if you guys can ship to my job instead of my house at my job from 9 to 5 everyday ain't home to receive package

06-26-2008, 07:54 AM	#16 (permalink)
whitecivicsi Senior Member Join Date: Apr 2006 Location: Las Vegas, NV Posts: 3,954 Mike C. iTrader: 23 / 100%	I don't like u Tai. Now it looks like i'll be buying this sometime in the near future now...even though I'm not looking for a new clutch or flywheel just yet. Thxs

06-26-2008, 01:28 PM	#18 (permalink)
GALAXY~SI Senior Member Join Date: Apr 2006 Location: Chester NY Age: 20 Posts: 12,065 Kurt iTrader: 17 / 100%	Tai I spoke to remy said thaat since it is my first purchse he can't Kinda sucks I'm not home I work 930 to 5 neva home lol its ok Tai think you can hook me up with tracking number so I know where it is atleast maybe tell my boy to sign for it

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch+FlyWheel	Kyle07Si	Mechanical Problems & Technical Chat	51	02-06-2009 12:31 AM
flywheel and clutch??	raylleredlx	Bolt-Ons And All-Motor	7	01-14-2008 12:17 AM
flywheel and clutch question....	tkellymn	Mechanical Problems & Technical Chat	0	08-17-2007 06:05 PM
package deal??	silver h22	CorSport	1	07-17-2007 11:18 AM