short shifters / bushings

***unplugged*** · 10-23-2007, 06:15 PM

On my '06 EX coupe I had the TWM short shifter and bushings which were great. However, I noticed the bushings on the 07 are bigger. Does the '08 have the same as the '07?

Also, any kits that reduce the shifter height as well as the throw? I'd like to lower the height as well, without having to cut if possible.

This is going to be my first non-OEM modification.

***Izzy*** · 10-23-2007, 06:17 PM

The Skunk2 makes the shift knob sit a bit lower. But a TWM or Voodoo knob will sit VERY low as well. The TWM knobs have a height adjustment nut that you don't have to put on, and it will sink the knob down a good inch or something over stock height.

My current Spoon knob sits very low as well, just about as low as my TWM did.

Honestly, being that low (and how low it is now) is a pain until you get used to it.

Since no one has released 07-08 specific bushings, I'd assume they'll still work.

***unplugged*** · 10-23-2007, 10:32 PM

thanks, will look into it

luiek20 · 12-13-2007, 11:27 PM

:nutkick:

10-23-2007, 06:15 PM	#1 (permalink)
*unplugged* VIP Member Join Date: Sep 2005 Location: NJ Age: 24 Posts: 1,265 iTrader: 1 / 100%	short shifters / bushings On my '06 EX coupe I had the TWM short shifter and bushings which were great. However, I noticed the bushings on the 07 are bigger. Does the '08 have the same as the '07? Also, any kits that reduce the shifter height as well as the throw? I'd like to lower the height as well, without having to cut if possible. This is going to be my first non-OEM modification. __________________ - Mark 2008 Honda Civic SI (stock) 2006 Honda Civic EX (sold)

10-23-2007, 06:17 PM	#2 (permalink)
*Izzy* Supreme Pizza! Join Date: Mar 2006 Location: Azusa, CA Age: 25 Posts: 11,936 iTrader: 5 / 100%	The Skunk2 makes the shift knob sit a bit lower. But a TWM or Voodoo knob will sit VERY low as well. The TWM knobs have a height adjustment nut that you don't have to put on, and it will sink the knob down a good inch or something over stock height. My current Spoon knob sits very low as well, just about as low as my TWM did. Honestly, being that low (and how low it is now) is a pain until you get used to it. Since no one has released 07-08 specific bushings, I'd assume they'll still work. __________________

10-23-2007, 10:32 PM	#3 (permalink)
*unplugged* VIP Member Join Date: Sep 2005 Location: NJ Age: 24 Posts: 1,265 iTrader: 1 / 100%	thanks, will look into it __________________ - Mark 2008 Honda Civic SI (stock) 2006 Honda Civic EX (sold)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TWM short shifter + bushings	b0yd07	TWM Performance Short Shifters	19	12-29-2007 09:22 AM
TWM Short Shifter and Base Bushings installed (pics)	[IVI]	Bolt-Ons And All-Motor	15	06-05-2007 07:34 AM
2007 Civic Shifter Cable Bushings!	TWM Performance	TWM Performance Short Shifters	23	04-26-2007 02:55 PM
Big Holiday Sale From TWM Short Shifters!	TWM Performance	TWM Performance Short Shifters	40	01-30-2007 05:24 PM
Received TWM Short Shifter and Bushings today!!! (pics)	[IVI]	Bolt-Ons And All-Motor	8	10-10-2006 09:09 PM

12-13-2007, 11:27 PM	#4 (permalink)
luiek20 Senior Member Join Date: Oct 2007 Location: paterson, new jersey Age: 20 Posts: 506 iTrader: 0 / 0%	:nutkick: