Password JDM Carbon Fiber and Carbon Kevlar Power Chamber: 06+ Civic Si - Page 7

futhermucker · 08-09-2007, 06:43 PM

1. Berlinas2k2
2. Sickyute
3. Loverofcivics(maybe)
4. zeuceone
5. TampaSi07 (depending on dyno results)
6. bubzsi (most def.)
7. Aki (depending on results too)
8. pacebria
9. Izzy (he has asthma and needs a new lung!)
10. xxBodkinxx (if it shows caiish gains then I would def pick this up.)
11. gcfernandez
12. mrJLIEU (depends on the results)
13. Devoted_1
14. Blatallic
15. SiRyan
16. The fabulous Mr. Rutten 16.
17. F-1 Si (also depending on results)
18. rc46er (depending on results)
19. nyblksi
20. drfters13(depending on results)
21. KING BOB (depending on results)
22. GORDATA (Depending on results)
23. CaliGuy (Depending on results)
24. Gone
25.futhermucker

***Excelerate*** · 08-10-2007, 03:28 PM

Ok the prototype is done. It is at the warehouse that does the carbon fiber products being finished. They are also working on a slight re-design of the battery relocation tray. I believe it needs an extra bracket they said. It should be about 1-2 more weeks.

King Bob · 08-10-2007, 04:24 PM

good news, thanks for the update!

GreySi07 · 08-20-2007, 12:59 PM

So about one more week on the intake?

magicballer2001 · 08-20-2007, 02:38 PM

Finallly!!!!

GreySi07 · 08-22-2007, 04:49 PM

Status please.

SCSi · 08-23-2007, 01:55 AM

Subscribed and interested as hell!

futhermucker · 08-23-2007, 02:45 AM

any dynos?

***Excelerate*** · 08-23-2007, 12:26 PM

I'm still waiting for Password to finish everything.

simply si · 08-25-2007, 02:00 PM

i was about to order injen now i come across this haha.

i'm in if people drop out of it?

1. Berlinas2k2
2. Sickyute
3. Loverofcivics(maybe)
4. zeuceone
5. TampaSi07 (depending on dyno results)
6. bubzsi (most def.)
7. Aki (depending on results too)
8. pacebria
9. Izzy (he has asthma and needs a new lung!)
10. xxBodkinxx (if it shows caiish gains then I would def pick this up.)
11. gcfernandez
12. mrJLIEU (depends on the results)
13. Devoted_1
14. Blatallic
15. SiRyan
16. The fabulous Mr. Rutten 16.
17. F-1 Si (also depending on results)
18. rc46er (depending on results)
19. nyblksi
20. drfters13(depending on results)
21. KING BOB (depending on results)
22. GORDATA (Depending on results)
23. CaliGuy (Depending on results)
24. Gone
25. futhermucker
26. simply si (depending on results)

futhermucker · 08-31-2007, 01:49 AM

any word?

SI in OC · 09-02-2007, 10:19 AM

***Zeuceone*** · 09-02-2007, 03:13 PM

the battery relocator is done and still in raw metal. when they mass produce them it will be powder coated and nicer than the original. the final mold of the intake is done they just need to incoperate the maf sensor.

GreySi07 · 09-02-2007, 03:17 PM

thanks for that update.

legendman · 09-02-2007, 08:09 PM

I've tried reading the whole thread, but if I missed over my answer i apologize. I have the injen CAI right now and it looks like the password JDM intake may be worth it to switch over to. I love my CAI, but the loss of hp/torque in the low end along with my other mods (which also contribute to this problem) make it a pain to drive stoplight to stoplight. There's just no lowend. From the looks of this, it looks like it will not only gain HP up top, but b/c of the placement of the filter and such, may also help lowend HP/Torque. Am I putting this together right?

-Nate

berlinas2k2 · 09-02-2007, 10:12 PM

Pics!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!

GreySi07 · 09-02-2007, 10:19 PM

im pretty sure its the same as the DC5 power chamber except it has the hole for the MAF.

berlinas2k2 · 09-02-2007, 10:24 PM

Thats what password said when i called them.

GreySi07 · 09-02-2007, 11:05 PM

which if that is the case i dont see why we cant just buy the DC5 intake and cut the hole out ourselves or better yet if they made a MAF adapter kit for the intake that would be even better.

l00khere · 09-03-2007, 01:03 PM

1. Berlinas2k2
2. Sickyute
3. Loverofcivics(maybe)
4. zeuceone
5. TampaSi07 (depending on dyno results)
6. bubzsi (most def.)
7. Aki (depending on results too)
8. pacebria
9. Izzy (he has asthma and needs a new lung!)
10. xxBodkinxx (if it shows caiish gains then I would def pick this up.)
11. gcfernandez
12. mrJLIEU (depends on the results)
13. Devoted_1
14. Blatallic
15. SiRyan
16. The fabulous Mr. Rutten 16.
17. F-1 Si (also depending on results)
18. rc46er (depending on results)
19. nyblksi
20. drfters13(depending on results)
21. KING BOB (depending on results)
22. GORDATA (Depending on results)
23. CaliGuy (Depending on results)
24. Gone
25. futhermucker
26. simply si (depending on results)
27. l00khere

08-10-2007, 03:28 PM	#122 (permalink)
*Excelerate* 8thcivic Sponsor Join Date: Oct 2006 Location: Branford, CT Age: 28 Posts: 2,112 Joshua Lockwood iTrader: 73 / 100%	Ok the prototype is done. It is at the warehouse that does the carbon fiber products being finished. They are also working on a slight re-design of the battery relocation tray. I believe it needs an extra bracket they said. It should be about 1-2 more weeks. __________________ EXCELERATE PERFORMANCE - Your Official 8thCivic Vendor and Honda Performance Parts Specialist!! See our CT Engineering, ROTORA, Injen, TEIN, TOKICO, Random Technology, AEM, KAIXEN HID, Unorthodox Racing, P2R, Buddy Club, Innovative Mounts, and K Sport Sales at The Sponsored Posting Forum by Excelerate Performance NEW WEB STORE: Store.ExceleratePerformance.com AIM: Excelerate04 Phone: 203-483-6100 http://www.ExceleratePerformance.com

08-23-2007, 12:26 PM	#129 (permalink)
*Excelerate* 8thcivic Sponsor Join Date: Oct 2006 Location: Branford, CT Age: 28 Posts: 2,112 Joshua Lockwood iTrader: 73 / 100%	I'm still waiting for Password to finish everything. __________________ EXCELERATE PERFORMANCE - Your Official 8thCivic Vendor and Honda Performance Parts Specialist!! See our CT Engineering, ROTORA, Injen, TEIN, TOKICO, Random Technology, AEM, KAIXEN HID, Unorthodox Racing, P2R, Buddy Club, Innovative Mounts, and K Sport Sales at The Sponsored Posting Forum by Excelerate Performance NEW WEB STORE: Store.ExceleratePerformance.com AIM: Excelerate04 Phone: 203-483-6100 http://www.ExceleratePerformance.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/civic-si/46461-password-jdm-carbon-fiber-carbon-kevlar-power-chamber-06-civic-si.html
Posted By	For	Type	Date
JDM power chamer intake oh snap - Page 26 - Club RSX Message Board	This thread	Refback	03-04-2008 12:42 PM
JDM power chamer intake oh snap - Page 26 - Club RSX Message Board	This thread	Refback	02-26-2008 04:53 PM
JDM power chamer intake oh snap - Page 26 - Club RSX Message Board	This thread	Refback	02-11-2008 07:57 PM
JDM power chamer intake oh snap - Page 26 - Club RSX Message Board	This thread	Refback	01-12-2008 05:08 PM
Password JDM Carbon Fiber and Carbon Kevlar Power Chamber: 06+ Civic Si - 8th Generation Honda Civic Forum	This thread	Refback	01-07-2008 05:10 AM
JDM power chamer intake oh snap - Page 26 - Club RSX Message Board	This thread	Refback	12-08-2007 01:41 AM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
carbon fiber grill JDm badge	07_FG_4Dr_S.i.	Inside and Out	30	05-22-2007 06:40 PM
06-07 Honda Civic SI Coupe Carbon Fiber Fuel Gas Door	civicex2006	Inside and Out	6	10-22-2006 06:41 PM
ViS Carbon Fiber Hoods Now Available (2dr and 4dr)	AutoCity	Auto City Imports	2	10-04-2006 04:23 PM
Will a 2003 Seibon VS-II carbon fiber hood fit my 2004 Honda Civic EX?	SiTuner06	Inside and Out	2	11-07-2005 05:58 PM

08-09-2007, 06:43 PM	#121 (permalink)
futhermucker Senior Member Join Date: Dec 2006 Location: New Orleans Posts: 393 Ronny iTrader: 3 / 100%	1. Berlinas2k2 2. Sickyute 3. Loverofcivics(maybe) 4. zeuceone 5. TampaSi07 (depending on dyno results) 6. bubzsi (most def.) 7. Aki (depending on results too) 8. pacebria 9. Izzy (he has asthma and needs a new lung!) 10. xxBodkinxx (if it shows caiish gains then I would def pick this up.) 11. gcfernandez 12. mrJLIEU (depends on the results) 13. Devoted_1 14. Blatallic 15. SiRyan 16. The fabulous Mr. Rutten 16. 17. F-1 Si (also depending on results) 18. rc46er (depending on results) 19. nyblksi 20. drfters13(depending on results) 21. KING BOB (depending on results) 22. GORDATA (Depending on results) 23. CaliGuy (Depending on results) 24. Gone 25.futhermucker

08-10-2007, 04:24 PM	#123 (permalink)
King Bob Senior Member Join Date: Oct 2006 Age: 27 Posts: 635 Houma, Louisiana iTrader: 1 / 100%	good news, thanks for the update!

08-20-2007, 12:59 PM	#124 (permalink)
GreySi07 Senior Member Join Date: Mar 2007 Location: Jax,FL Posts: 900 iTrader: 3 / 100%	So about one more week on the intake?

08-20-2007, 02:38 PM	#125 (permalink)
magicballer2001 Senior Member Join Date: Jun 2007 Location: Indianapolis, IN Age: 21 Posts: 1,195 Jimmy iTrader: 6 / 100%	Finallly!!!!

08-22-2007, 04:49 PM	#126 (permalink)
GreySi07 Senior Member Join Date: Mar 2007 Location: Jax,FL Posts: 900 iTrader: 3 / 100%	Status please.

08-23-2007, 01:55 AM	#127 (permalink)
SCSi Senior Member Join Date: Jun 2007 Posts: 360 iTrader: 0 / 0%	Subscribed and interested as hell!

08-23-2007, 02:45 AM	#128 (permalink)
futhermucker Senior Member Join Date: Dec 2006 Location: New Orleans Posts: 393 Ronny iTrader: 3 / 100%	any dynos?

08-25-2007, 02:00 PM	#130 (permalink)
simply si Senior Member Join Date: Mar 2007 Location: Bothell, WA Posts: 375 iTrader: 6 / 100%	i was about to order injen now i come across this haha. i'm in if people drop out of it? 1. Berlinas2k2 2. Sickyute 3. Loverofcivics(maybe) 4. zeuceone 5. TampaSi07 (depending on dyno results) 6. bubzsi (most def.) 7. Aki (depending on results too) 8. pacebria 9. Izzy (he has asthma and needs a new lung!) 10. xxBodkinxx (if it shows caiish gains then I would def pick this up.) 11. gcfernandez 12. mrJLIEU (depends on the results) 13. Devoted_1 14. Blatallic 15. SiRyan 16. The fabulous Mr. Rutten 16. 17. F-1 Si (also depending on results) 18. rc46er (depending on results) 19. nyblksi 20. drfters13(depending on results) 21. KING BOB (depending on results) 22. GORDATA (Depending on results) 23. CaliGuy (Depending on results) 24. Gone 25. futhermucker 26. simply si (depending on results)

08-31-2007, 01:49 AM	#131 (permalink)
futhermucker Senior Member Join Date: Dec 2006 Location: New Orleans Posts: 393 Ronny iTrader: 3 / 100%	any word?

09-02-2007, 10:19 AM	#132 (permalink)
SI in OC Senior Member Join Date: Oct 2006 Location: Orange County CA Posts: 190 iTrader: 4 / 100%

09-02-2007, 03:17 PM	#134 (permalink)
GreySi07 Senior Member Join Date: Mar 2007 Location: Jax,FL Posts: 900 iTrader: 3 / 100%	thanks for that update.

09-02-2007, 08:09 PM	#135 (permalink)
legendman Senior Member Join Date: Mar 2006 Age: 25 Posts: 662 iTrader: 4 / 100%	I've tried reading the whole thread, but if I missed over my answer i apologize. I have the injen CAI right now and it looks like the password JDM intake may be worth it to switch over to. I love my CAI, but the loss of hp/torque in the low end along with my other mods (which also contribute to this problem) make it a pain to drive stoplight to stoplight. There's just no lowend. From the looks of this, it looks like it will not only gain HP up top, but b/c of the placement of the filter and such, may also help lowend HP/Torque. Am I putting this together right? -Nate

09-02-2007, 10:12 PM	#136 (permalink)
berlinas2k2 Senior Member Member Join Date: Jan 2007 Location: Vtecc'n in da Mugen' Posts: 4,741 254whp on 75 iTrader: 16 / 100%	Pics!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!

09-02-2007, 10:19 PM	#137 (permalink)
GreySi07 Senior Member Join Date: Mar 2007 Location: Jax,FL Posts: 900 iTrader: 3 / 100%	im pretty sure its the same as the DC5 power chamber except it has the hole for the MAF.

09-02-2007, 10:24 PM	#138 (permalink)
berlinas2k2 Senior Member Member Join Date: Jan 2007 Location: Vtecc'n in da Mugen' Posts: 4,741 254whp on 75 iTrader: 16 / 100%	Thats what password said when i called them.

09-02-2007, 11:05 PM	#139 (permalink)
GreySi07 Senior Member Join Date: Mar 2007 Location: Jax,FL Posts: 900 iTrader: 3 / 100%	which if that is the case i dont see why we cant just buy the DC5 intake and cut the hole out ourselves or better yet if they made a MAF adapter kit for the intake that would be even better.

09-03-2007, 01:03 PM	#140 (permalink)
l00khere Junior Member Join Date: Jun 2007 Posts: 2 iTrader: 0 / 0%	1. Berlinas2k2 2. Sickyute 3. Loverofcivics(maybe) 4. zeuceone 5. TampaSi07 (depending on dyno results) 6. bubzsi (most def.) 7. Aki (depending on results too) 8. pacebria 9. Izzy (he has asthma and needs a new lung!) 10. xxBodkinxx (if it shows caiish gains then I would def pick this up.) 11. gcfernandez 12. mrJLIEU (depends on the results) 13. Devoted_1 14. Blatallic 15. SiRyan 16. The fabulous Mr. Rutten 16. 17. F-1 Si (also depending on results) 18. rc46er (depending on results) 19. nyblksi 20. drfters13(depending on results) 21. KING BOB (depending on results) 22. GORDATA (Depending on results) 23. CaliGuy (Depending on results) 24. Gone 25. futhermucker 26. simply si (depending on results) 27. l00khere