|
|
|
|
|||||||
| Register | Forum | Garage | Photo Gallery | FAQ | Calendar | Insurance | Search | Today's Posts | Mark Forums Read | Auto Loans | Auto Escrow |
|
|
|
LinkBack | Thread Tools | Display Modes |
08-14-2012, 07:21 PM
|
#1 (permalink) |
|
Senior Member
Join Date: Mar 2011
Location: Enola, PA
Posts: 17,137
Ryan
|
550whp or bust! Take two on the SI
Hello all! I have been on this site for well over a year and never made a build thread. I got bored so i'm starting one for my second build up of this car!!!
I apologize in advanced, i don't take many pictures of my car, i will take more this time around! The day i bought the car in march 2011:    I'm the skinny dude in the pictures When i got this car the only thing i wanted was to get the HFP lip and fog lights I thought this car was plenty fast when i got it! I finally caught the modding bug and bought the Corsport short shifter and cable bushings and a new knob and red stitch shift boot  Sorry for the bad picture This is where the modding took off Bought at CNT catted race header, injen intake, and flashpro  Next was a HFP suspension  And I cleared my headlights   ------------------------------------------------------------------------------------------------------------------------------------------ Wasn't long before i was bored and wanted more power... I sold my second car 2004 eclipse gs, i kept it because it was hit while parked, i got screwed on insurance and decided to fix it myself...in the mean time i bought a new car. Used it to buy a JRSC setup!  JRSC - bought from another member CNT header Injen CAI Hondata flashpro Em1 CMC Merc racing aftercooler 3in pulley Hondata 4bar map sensor RC650 cc injectors Full race exhuast Tuned by Evans tuning  Also installed Em1 CMC and had a horrible time bleeding it!  And had to get an exhaust! thought id get the "quietest one"  Full race beside stock pipe  Merc racing remote fill  Merc racing aftercooler  Kit installed:   Guages:  OH yeah! I finally got fog lights! But still no lip like I originally wanted   ************************************************** *********************************** I never got that setup dyno'ed I only had it for 3 months before a deal presented itself! Straight trade for my JRSC, aftercooler, header, and exhuast to get a jo-tech turbo kit Full turbo build specs: Jo-tech turbo kit Pt 62/62 turbo with a .68 ar 2.5in charge piping w/intercooler rated at 650 Go power 1k injectors Hondata flashpro 4bar map sensor DW300lph fuel pump Tial wastegate Tial BOV Em1 cmc Competition state 4 clutch 3in downpipe Q300 exhaust HFP suspension w/ sportline springs Buddy club camber arms Ingualls front camber bushings Dyno:  Some pics of the kit!    10an Oilpan bung welded on!  Turbo mounted for the first time  Oil drain on  Because I had to trade my full race exhaust, I had a crappy skunk 2 for a month!  Only took one month to replace this ridiculous piece of garbage!  Got a q300!!!   Unfortunately my turbo’s oil seal blew, I had to take the whole sub frame down again and replace it O well I rebuilt the turbo myself! I like to learn new things  FMIC:  Everthing was going great until my tires started to spin while tuning! So I bought hancook v12s The day I installed them I went for a nice ride, and slipped my clutch because the tires gripped better! I knew it was a matter of time on the stock clutch! Dropped the subframe sorry for the bad picture!:  Transmission off, to the left is the stock clutch!  Engine without the tranny and a good turbo shot!   I ended up installing a Competition stage 4 clutch! I finally did some cosmetics to my car, got springs, projectors, and the HFP lip  .   I also installed a pioneer navi!  How my car looked   On the dyno:  Didn’t have this set up before I got bored again and decided I wanted to part with the car and start something new!!! I posted everything for sale!  WHELP! After talking with some people around me and on 8thcivic I decided against it, unfortunately I sold a lot of parts…but I still had most of them! I will reserve the next post for my next big power build! Last edited by snizzletoff; 10-29-2012 at 01:01 PM. |
|
|
| Sponsored Links | |||
Advertisement | |||
|
08-14-2012, 07:21 PM
|
#2 (permalink) |
|
Senior Member
Join Date: Mar 2011
Location: Enola, PA
Posts: 17,137
Ryan
|
:shadyhat:
How the car looks these days!
  I plan on doing all my own work on this build! building up this car has taught me so very much about cars everyone really should just dive in and work especially with a site like this with so many DIY's and helpful people! Engine: Shortblock built by SRT K20a2 block with a supertech block guard Arias pistons - 9.0:1 compression 86.5mm bore Pauter rods Rsx type-s oil pump Supertech Valves Supetech dual springs Supertech seals Prayoonto stage 3 cams Toda timing tensioner Cometic head gasket Arp head studs ACL main bearings ARP rod cap bolts Fuel system: SRT fuel rail SRT dual pump fuel cage - 8an feed, 6an return SRT fuel rail Dual walbro 255lph pumps Turbo/ go fast parts Jotech turbo kit pt 62/26 turbo 2.5inch charge piping w/intercooler rated for 650hp Tial 44mm wastegate 4.3 psi spring Open dump ( want to get this recirculated in the future!) Tial blow off valve Mac 4port solenoid for BBG 3in down pipe Hondata flashpro Hondata 4 bar map sensor Go-power 1000cc injectors 3in dump pimp q300 exhuast Hondata Traction control Transmission: Getting every single piece inside the transmission cryogenically treated Installing Syncrotech carbon syncronizers Running a 4.3 final drive from club rsx (also cryno treated) Competition stage 5 clutch 4 puck/sprung Em1 CMC Misc: Apexi Turbo timer XLR8 dual gauge pod Glowshift wide-band digital series A/f gauge Glowshift digital series boost gauge Glowshift oil pressure gauge Suspension/wheels: HFP suspension Energy suspension LCA bushings Hancook v12's 225/45/17 Meyle platinum rotors Stoptech pads SS break lines Soon: XXR 527's 17x8.25 +35 Dunlop *spec 245/40/17 tires The block has arived!    Also received my rear hasport 70a mount, 4.3psi wastegate spring, arp headstuds!  Fuel cage (needs cleaned!)   Camshafts are in! Prayoonto stage 3's along with the titanium retainers and valve seals    Toda tensioner also arrived!  Starting the tear down today! Got some pics of the car before it goes under!   Got a lot of hoses, wires and lots of other things out of the way now!   Got the engine out today!       Had a lazy day today but still got some accomplished. Took the transmission off the engine, and started breaking it down. I got the case split but didn't start pressing anything apart yet. I also got the intake manifold off and a few other things.  Broke down my old block today, got the head off. Also got the transmission totally apart  Rocker arms nicely wrapped in rubber bands    .All the gears laid out, Should be shipping them tomorrow!  Found that missing valve spring retainer and made a little progress so far today! Got the full supertech vavle train installed  Sexy head stud pic  Head on and torqued, cam towers on and torqued  Valve cover just set on too see how it looks! Thanks Bulliedog!!!   Some final pictures of the build: Installing the 4.3psi wastegate spring  A very nicely angled oil drain:  Removed the subframe (last time for awhile i hope!)  The final trans pictures before re-sealing the case   Want to thank Danny (Wannavtec) for taking a few photos of my car at Dyno day and the red robin meetup after!        
Last edited by snizzletoff; 04-02-2013 at 07:45 AM. |
|
|
|
|
08-14-2012, 08:25 PM
|
#6 (permalink) | |
|
Senior Member
Join Date: Mar 2011
Location: Enola, PA
Posts: 17,137
Ryan
|
Quote:
Sent from my PG86100 using Tapatalk 2 |
|
|
|
|
|
08-14-2012, 08:31 PM
|
#7 (permalink) | |
|
VIP Member
 
Join Date: Nov 2007
Location: Lynnfield, MA
Age: 38
Posts: 10,116
Mike
|
Quote:
__________________
Full-Race with GT3076R 467whp and 327tq(edyno)  http://www.8thcivic.com/forums/turbo...ace-build.html
|
|
|
|
|
|
08-14-2012, 08:35 PM
|
#8 (permalink) | |
|
Senior Member
Join Date: Mar 2011
Location: Enola, PA
Posts: 17,137
Ryan
|
Quote:
Sent from my PG86100 using Tapatalk 2 |
|
|
|
|
|
08-14-2012, 08:46 PM
|
#9 (permalink) | |
|
Mr. Fappypants
Join Date: Mar 2010
Location: SoMD
Age: 29
Posts: 16,280
Lou
|
Looks sexy bro!!
__________________
 My 09 GGM FA5 Build 222 WHP 161 TQ Quote:
|
|
|
|
|
|
08-14-2012, 09:07 PM
|
#12 (permalink) | |
|
Senior Member
Join Date: Mar 2011
Location: Enola, PA
Posts: 17,137
Ryan
|
Quote:
Sent from my PG86100 using Tapatalk 2 |
|
|
|
|
|
08-14-2012, 09:16 PM
|
#14 (permalink) | |
|
VIP Member
Join Date: Nov 2007
Location: Lynnfield, MA
Age: 38
Posts: 10,116
Mike
|
Quote:
__________________
Full-Race with GT3076R 467whp and 327tq(edyno) http://www.8thcivic.com/forums/turbo...ace-build.html
|
|
|
|
|
|
08-14-2012, 09:17 PM
|
#15 (permalink) | |
|
Senior Member
Join Date: Mar 2011
Location: Enola, PA
Posts: 17,137
Ryan
|
Quote:
|
|
|
|
|
|
08-14-2012, 09:21 PM
|
#16 (permalink) | |
|
VIP Member
Join Date: Nov 2007
Location: Lynnfield, MA
Age: 38
Posts: 10,116
Mike
|
Quote:
__________________
Full-Race with GT3076R 467whp and 327tq(edyno) http://www.8thcivic.com/forums/turbo...ace-build.html
|
|
|
|
|
|
08-14-2012, 10:02 PM
|
#19 (permalink) | |
|
Senior Member
Join Date: Mar 2011
Location: Enola, PA
Posts: 17,137
Ryan
|
Quote:
|
|
|
|
|
| Sponsored Links | |
Advertisement | |
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fathom18's 500whp Full-Race Build | fathom18 | Turbocharging | 857 | 04-03-2013 06:12 PM |
| My 500whp FA5, and 370z | da_lsvtak | Introduction & Pictures | 145 | 09-15-2012 08:21 PM |
| [DYNO] Honda Civic Si, AJP Turbo Kit, 500whp/320tq, Hondata FlashPro | EvansTuningDotCom | Evans Tuning | 5 | 05-31-2011 04:05 PM |
| bust! | ASSALBERT | California South | 62 | 04-04-2008 01:10 AM |
Linear Mode
