Need help with Exhaust & Springs Installation! :)

mmmken · 05-08-2008, 08:40 PM

Hey all,

I'm gonna pick up my new exhaust and springs from the states on the weekend, but I won't have enough money for professional installation when I get back.

I noticed that there were a lot of "need help with installation" threads lately, so I might as well add another one (or gather together and help out).

Like I told Mike, I can provide beer, BBQ, girls (LOL, I wish), and/or money!

Who's up for an install meet?!

KMM · 05-09-2008, 12:12 AM

why not just show up at are place and we will help you as you do it on like saterday infact I call out everyone over to my place for saterday to have a "install anything that needs to be installed" meet and more then likely BBQ

I have tools out the wazoo along with loads of space and an air compressor, I bart and more then likely my father will be on hand to help....

ViperSam · 05-09-2008, 12:38 AM

i'm there! lol. i'll bring the beers

KMM · 05-09-2008, 12:47 AM

bart should be up around 9-10am and I will try to do the same but more then likely around 11-12 for me

mmmken · 05-09-2008, 01:01 AM

Niceee. I thought you said you weren't available this weekend though? I might not be able to get my parts by Saturday though..

KMM · 05-09-2008, 01:31 AM

tecnically I will not be avalabe but I figure that I will give you guys access to tools, a place and expertice aswell as help, see I will be helping not doing all the work myself as you watch

if thats ok, I can do the full install myself but at a later day, thats what I meant sorry for any confuseing there

ViperSam · 05-09-2008, 12:22 PM

yeah. i will probably be in town around 2 or so. wont be back till then.... if thats still ok with you guys?

aznchzexr · 05-09-2008, 12:40 PM

what kind of exhaust? will it bolt right up or will you need to weld?

also with springs , you`ll need to rent a spring compressor....

air tools would be key :) esp for the top of strut

i`m in if i`m free that day

mmmken · 05-09-2008, 01:27 PM

It's just bolt-on, no welding required. Yeah, I'm going to take care of the compressor. What other tools would I need though?

KMM · 05-09-2008, 02:15 PM

Quote:

Originally Posted by ViperSam

yeah. i will probably be in town around 2 or so. wont be back till then.... if thats still ok with you guys?

2pm I think will be a great time... I suppose you guys would like my address right
well pm me for it and my phone number ok.

Quote:

Originally Posted by aznchzexr

what kind of exhaust? will it bolt right up or will you need to weld?

also with springs , you`ll need to rent a spring compressor....

air tools would be key :) esp for the top of strut

i`m in if i`m free that day

Quote:

Originally Posted by mmmken

It's just bolt-on, no welding required. Yeah, I'm going to take care of the compressor. What other tools would I need though?

everything you need I have, I have a welder if needed, I have spring compressors, I have an air compressor and I have air tools as well as hand tools, I was a machanic for many years I have all kinds of tools and know how, thats why I'm offering to teach you guys so you know that to do and when I have time I love to do it for you cause I love working.... on just about anything.

KMM · 05-09-2008, 03:49 PM

Quote:

Originally Posted by mmmken

Niceee. I thought you said you weren't available this weekend though? I might not be able to get my parts by Saturday though..

if anything sunday might even be better but we shell see right...

we will be at home all day working so ya show up but pm me are bart for address and such

mmmken · 05-09-2008, 05:53 PM

Poop. My original dealer found out that he didn't have the parts in stock, so I bought them elsewhere. Looks like I'm going to be getting them next weekend - which puts that on the NY meet.

I guess I'll drop by the weekend after next?

KMM · 05-09-2008, 05:58 PM

Quote:

Originally Posted by mmmken

Poop. My original dealer found out that he didn't have the parts in stock, so I bought them elsewhere. Looks like I'm going to be getting them next weekend - which puts that on the NY meet.

I guess I'll drop by the weekend after next?

sure sounds good but drop by this weekend if sam is still coming

mmmken · 05-09-2008, 06:00 PM

Sure, is that Saturday or Sunday?

KMM · 05-09-2008, 06:45 PM

Quote:

Originally Posted by mmmken

Sure, is that Saturday or Sunday?

satarday
sam will be there around 2ish

mmmken · 05-09-2008, 07:14 PM

Saturday @ 2PM it is. I'll see you and Sam there! :)

KMM · 05-09-2008, 07:23 PM

sweet,.... so your still bringing the girls right

***portabuddy*** · 05-09-2008, 07:24 PM

whats this now?>???? so who is showing uip when?, tm going to be nursing a hangover fore sure....

sam is comming at 2pm and ken at 3pm????

KMM · 05-09-2008, 07:27 PM

Quote:

Originally Posted by portabuddy

whats this now?>???? so who is showing uip when?, tm going to be nursing a hangover fore sure....

sam is comming at 2pm and ken at 3pm????

no both at 2pm

***portabuddy*** · 05-09-2008, 07:49 PM

ok cool i should be ok by then... but right now im still drunk...

05-08-2008, 08:40 PM	#1 (permalink)
mmmken Senior Member Join Date: Feb 2007 Location: Markham Posts: 321 Kenneth iTrader: 1 / 100%	Need help with Exhaust & Springs Installation! :) Hey all, I'm gonna pick up my new exhaust and springs from the states on the weekend, but I won't have enough money for professional installation when I get back. I noticed that there were a lot of "need help with installation" threads lately, so I might as well add another one (or gather together and help out). Like I told Mike, I can provide beer, BBQ, girls (LOL, I wish), and/or money! Who's up for an install meet?!

05-09-2008, 12:40 PM	#8 (permalink)
aznchzexr Senior Member Join Date: Oct 2005 Location: Mississauga, ON Age: 24 Posts: 2,245 Chester iTrader: 0 / 0%	what kind of exhaust? will it bolt right up or will you need to weld? also with springs , you`ll need to rent a spring compressor.... air tools would be key :) esp for the top of strut i`m in if i`m free that day Last edited by aznchzexr; 05-09-2008 at 12:41 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amp installation problem please help!	Repo buyer	I.C.E., Electrical, Security, & Navigation	4	04-10-2007 06:40 PM
07 Amp Installation	HondaMan856	I.C.E., Electrical, Security, & Navigation	10	04-02-2007 07:55 PM
exhaust installation = $$$??	imtim25	Bolt-Ons And All-Motor	24	02-24-2007 04:15 PM

05-09-2008, 12:12 AM	#2 (permalink)
KMM Senior Member Join Date: Apr 2008 Location: mississauga Age: 26 Posts: 1,367 Mike Koscow iTrader: 1 / 100%	why not just show up at are place and we will help you as you do it on like saterday infact I call out everyone over to my place for saterday to have a "install anything that needs to be installed" meet and more then likely BBQ I have tools out the wazoo along with loads of space and an air compressor, I bart and more then likely my father will be on hand to help....

05-09-2008, 12:38 AM	#3 (permalink)
ViperSam Senior Member Join Date: Nov 2007 Location: Toronto, Ontario Posts: 692 Sam iTrader: 2 / 100%	i'm there! lol. i'll bring the beers

05-09-2008, 12:47 AM	#4 (permalink)
KMM Senior Member Join Date: Apr 2008 Location: mississauga Age: 26 Posts: 1,367 Mike Koscow iTrader: 1 / 100%	bart should be up around 9-10am and I will try to do the same but more then likely around 11-12 for me

05-09-2008, 01:01 AM	#5 (permalink)
mmmken Senior Member Join Date: Feb 2007 Location: Markham Posts: 321 Kenneth iTrader: 1 / 100%	Niceee. I thought you said you weren't available this weekend though? I might not be able to get my parts by Saturday though..

05-09-2008, 01:31 AM	#6 (permalink)
KMM Senior Member Join Date: Apr 2008 Location: mississauga Age: 26 Posts: 1,367 Mike Koscow iTrader: 1 / 100%	tecnically I will not be avalabe but I figure that I will give you guys access to tools, a place and expertice aswell as help, see I will be helping not doing all the work myself as you watch if thats ok, I can do the full install myself but at a later day, thats what I meant sorry for any confuseing there

05-09-2008, 12:22 PM	#7 (permalink)
ViperSam Senior Member Join Date: Nov 2007 Location: Toronto, Ontario Posts: 692 Sam iTrader: 2 / 100%	yeah. i will probably be in town around 2 or so. wont be back till then.... if thats still ok with you guys?

05-09-2008, 01:27 PM	#9 (permalink)
mmmken Senior Member Join Date: Feb 2007 Location: Markham Posts: 321 Kenneth iTrader: 1 / 100%	It's just bolt-on, no welding required. Yeah, I'm going to take care of the compressor. What other tools would I need though?

05-09-2008, 05:53 PM	#12 (permalink)
mmmken Senior Member Join Date: Feb 2007 Location: Markham Posts: 321 Kenneth iTrader: 1 / 100%	Poop. My original dealer found out that he didn't have the parts in stock, so I bought them elsewhere. Looks like I'm going to be getting them next weekend - which puts that on the NY meet. I guess I'll drop by the weekend after next?

05-09-2008, 06:00 PM	#14 (permalink)
mmmken Senior Member Join Date: Feb 2007 Location: Markham Posts: 321 Kenneth iTrader: 1 / 100%	Sure, is that Saturday or Sunday?

05-09-2008, 07:14 PM	#16 (permalink)
mmmken Senior Member Join Date: Feb 2007 Location: Markham Posts: 321 Kenneth iTrader: 1 / 100%	Saturday @ 2PM it is. I'll see you and Sam there! :)

05-09-2008, 07:23 PM	#17 (permalink)
KMM Senior Member Join Date: Apr 2008 Location: mississauga Age: 26 Posts: 1,367 Mike Koscow iTrader: 1 / 100%	sweet,.... so your still bringing the girls right