Upcoming dyno day... Pro Street Motorsports in Hayward - Page 2

Dwn4nythng · 04-09-2008, 11:31 AM

bumpp

olieebur · 04-09-2008, 11:43 AM

im down for this

razasasin · 04-09-2008, 05:47 PM

i may be down depending on the date, but all I have is my diy x-intake ... maybe I could bring my stock box and comparo?

K20Redline · 04-09-2008, 05:58 PM

Im down but I would need the date in advanced to get it off of work!

SiRyan · 04-09-2008, 07:10 PM

I'll be rolling with my boy in his g37

same1ol1jee · 04-09-2008, 07:11 PM

i'm down...i'll have some pulleys on soon...

***mad monkey*** · 04-09-2008, 07:28 PM

Quote:

Originally Posted by razasasin

i may be down depending on the date, but all I have is my diy x-intake ... maybe I could bring my stock box and comparo?

That would be nice. It'd be even better if someone that came and had X's real MAF so we can see how good you did. But yeah, it would answer alot of peoples questions about the DIY. Also you can see what Ant's DIY intake is pulling when he gets on the dyno.

Quote:

Originally Posted by K20Redline

Im down but I would need the date in advanced to get it off of work!

We will get a date set up soon. Don't expect it to be in a few weeks or anything. most likely a month and a half or so. Because I haven't gotten a bottom end yet and I WILL be included in this dyno day haha.

Quote:

Originally Posted by SiRyan

I'll be rolling with my boy in his g37

So do I smell a dyno? Or maybe a race?

SiRyan · 04-09-2008, 07:35 PM

lol, Dyno of course...He smokes me hella good on the freeway

***mad monkey*** · 04-09-2008, 07:45 PM

lol... I'm sure after the dyno there will be a few people wanting to test out their new-found HP hehe. That and hearing over 15 different honda motors blast their way through vtec to 7800 and some to 8500. Especially hearing it open header

. It gets to you real quick.

Cornizzy · 04-10-2008, 11:43 AM

I Wanna Kick It!! Adam Can U Pick Me Up Hahaha!!!

***mad monkey*** · 04-10-2008, 12:17 PM

Cornell, how's your new clutch?

C'mon everyone we need more people!

Cornizzy · 04-10-2008, 01:26 PM

Quote:

Originally Posted by mad monkey

Cornell, how's your new clutch?

C'mon everyone we need more people!

i love it! it pulls hard! but i just wish harder! haha

***mad monkey*** · 04-11-2008, 02:31 AM

Sooner or later it will.... right?

Cornizzy · 04-11-2008, 07:07 AM

^ haha yea hopefully...

***mad monkey*** · 04-11-2008, 01:08 PM

Depending on how much you have or wanna spend. Theres plenty of k20a2 motors out there for sale. You don't have to do much to have them put into our cars. And those motors put out more power than our k20z3's. I'd be glad to help you out in smoking us =). You'd be the ULITMATE sleeper, since you got that blue-light dash.

Cornizzy · 04-11-2008, 01:12 PM

Quote:

Originally Posted by mad monkey

Depending on how much you have or wanna spend. Theres plenty of k20a2 motors out there for sale. You don't have to do much to have them put into our cars. And those motors put out more power than our k20z3's. I'd be glad to help you out in smoking us =). You'd be the ULITMATE sleeper, since you got that blue-light dash.

haha yea i know! im thinking bout it.. gotsa SAVE UP FIRST!! lolz.. but u can be my mechanic! monkey FTW!

EDIT: aint the K20z1 faster then the K20a2? just wondering..

sk33ny · 04-11-2008, 01:19 PM

Quote:

Originally Posted by Cornizzy

haha yea i know! im thinking bout it.. gotsa SAVE UP FIRST!! lolz.. but u can be my mechanic! monkey FTW!

EDIT: aint the K20z1 faster then the K20a2? just wondering..

aint? lol... i think the k20z1s are rated at like 201hp.

newsiguy · 04-11-2008, 01:20 PM

i'd be down to dyno depending on price/date

Cornizzy · 04-11-2008, 01:22 PM

Quote:

Originally Posted by sk33ny

aint? lol... i think the k20z1s are rated at like 201hp.

haha excuse my SLANG lolz, but i thought it was rated at 210 and the a2 is 200?

sk33ny · 04-11-2008, 01:25 PM

Quote:

Originally Posted by Cornizzy

haha excuse my SLANG lolz, but i thought it was rated at 210 and the a2 is 200?

Quote:

K20A2
Found in:
2002-2004 Acura RSX Type-S and 2002-2005 Honda Civic Type R (EP3, European)
Displacement: 1998 cc
Compression: 11.0:1
Power: 200ps/197hp (147kW) @ 7400rpm
Torque: 142ft·lbf (193N·m) @ 6000rpm
Redline: 7800pm
VTEC Engagement: 5800rpm

Quote:

K20Z1
Found in:
2005-2006 Acura RSX-S
Displacement: 1998 cc
Compression: 11.0:1
Power: 201 hp (154 kW) @ 7800 rpm (SAE net J1349 Rev 8/04)
Torque: 141 ft·lbf (194 N·m) @ 7000 rpm (SAE net J1349 Rev 8/04)
Redline: 8100 rpm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Baseline Dyno Dyno Dynamics BRE Motorsports	08si4dr	Bolt-Ons And All-Motor	12	12-02-2007 11:48 PM
April 28th - 8thGen Civic Dyno Day at Pro Street Motorsports in Hayward, CA	ProStreet	California North	92	05-10-2007 01:35 AM

04-09-2008, 11:31 AM	#21 (permalink)
Dwn4nythng Senior Member Join Date: Sep 2006 Location: You think he's going to jail, it will be a long while before he does. I know what their doing. Posts: 2,424 NorCal Meet Organizer iTrader: 1 / 100%	bumpp

04-09-2008, 11:43 AM	#22 (permalink)
olieebur Senior Member Join Date: Apr 2007 Location: 6iX 5iVe 0H Age: 20 Posts: 1,027 JDM\|HFP\|5ZiGEN\|SKUNK2\|AEM\|P2R iTrader: 6 / 100%	im down for this

04-09-2008, 05:47 PM	#23 (permalink)
razasasin Senior Member Join Date: Nov 2007 Location: SJC Posts: 166 iTrader: 0 / 0%	i may be down depending on the date, but all I have is my diy x-intake ... maybe I could bring my stock box and comparo?

04-09-2008, 05:58 PM	#24 (permalink)
K20Redline Senior Member Join Date: Jan 2007 Location: Tracy, CA Age: 18 Posts: 920 Masi iTrader: 0 / 0%	Im down but I would need the date in advanced to get it off of work!

04-09-2008, 07:10 PM	#25 (permalink)
SiRyan Senior Member Join Date: Aug 2006 Location: Vallejo,Ca. Age: 23 Posts: 5,583 iTrader: 16 / 100%	I'll be rolling with my boy in his g37

04-09-2008, 07:11 PM	#26 (permalink)
same1ol1jee Senior Member Join Date: Jan 2008 Location: Bay Area, CA Posts: 152 Adam iTrader: 0 / 0%	i'm down...i'll have some pulleys on soon...

04-09-2008, 07:35 PM	#28 (permalink)
SiRyan Senior Member Join Date: Aug 2006 Location: Vallejo,Ca. Age: 23 Posts: 5,583 iTrader: 16 / 100%	lol, Dyno of course...He smokes me hella good on the freeway

04-09-2008, 07:45 PM	#29 (permalink)
*mad monkey* I do look like a monkey Join Date: Mar 2007 Location: bay area Posts: 1,646 Jeremy iTrader: 1 / 100%	lol... I'm sure after the dyno there will be a few people wanting to test out their new-found HP hehe. That and hearing over 15 different honda motors blast their way through vtec to 7800 and some to 8500. Especially hearing it open header . It gets to you real quick.

04-10-2008, 11:43 AM	#30 (permalink)
Cornizzy Senior Member Join Date: Sep 2006 Location: Bay Area (Pinole & Alameda) Age: 23 Posts: 1,430 Cornell iTrader: 0 / 0%	I Wanna Kick It!! Adam Can U Pick Me Up Hahaha!!!

04-10-2008, 12:17 PM	#31 (permalink)
*mad monkey* I do look like a monkey Join Date: Mar 2007 Location: bay area Posts: 1,646 Jeremy iTrader: 1 / 100%	Cornell, how's your new clutch? C'mon everyone we need more people!

04-11-2008, 02:31 AM	#33 (permalink)
*mad monkey* I do look like a monkey Join Date: Mar 2007 Location: bay area Posts: 1,646 Jeremy iTrader: 1 / 100%	Sooner or later it will.... right?

04-11-2008, 07:07 AM	#34 (permalink)
Cornizzy Senior Member Join Date: Sep 2006 Location: Bay Area (Pinole & Alameda) Age: 23 Posts: 1,430 Cornell iTrader: 0 / 0%	^ haha yea hopefully...

04-11-2008, 01:08 PM	#35 (permalink)
*mad monkey* I do look like a monkey Join Date: Mar 2007 Location: bay area Posts: 1,646 Jeremy iTrader: 1 / 100%	Depending on how much you have or wanna spend. Theres plenty of k20a2 motors out there for sale. You don't have to do much to have them put into our cars. And those motors put out more power than our k20z3's. I'd be glad to help you out in smoking us =). You'd be the ULITMATE sleeper, since you got that blue-light dash.

04-11-2008, 01:20 PM	#38 (permalink)
newsiguy Senior Member Join Date: Mar 2008 Posts: 218 iTrader: 1 / 100%	i'd be down to dyno depending on price/date