polyurathane bushings

redline8500 · 05-13-2008, 05:27 PM

I was curious if anyone made these for our cars. I was under my car yesterday cause my flex broke on my dcrh and I know its from going to the strip, anyways i noticed that the rear motor mount is broke and that the front ones had seen some serious stress thus explaining the broke flex. Does anyone make solid or polys for our cars, specifically motor mounts?

mike_si_29 · 05-13-2008, 05:34 PM

Innovative motor mounts are suppose to come out soon. I drove my car there twice already. It was about 1.5 weeks ago. I will probably gonna go there at the end of this week so they can try out their final product. Brian told me they sent final mounts for powder coating... so i guess they should be out soon

redline8500 · 05-13-2008, 05:48 PM

Sweet cause i need them. Are they solid or poly?

mitsukaiSI · 05-13-2008, 05:55 PM

i REALLY want solid but id settle for poly till solids are out . . . that scares me alot that you brok a mount

redline8500 · 05-13-2008, 05:58 PM

yeah go look at yours the one farthest back from the radiator, on the bottom of the car, the little one its torn right in half on mine

mike_si_29 · 05-13-2008, 06:00 PM

They are tapered polyurethane. You can check out their website, it will give you some idea. I dont know how final product gonna look but i bet something similar:
http://www.innovativemounts.com/

Ihockey1 · 05-13-2008, 08:21 PM

you could also inject the stock ones with window weld for 14 dollars, following blueroadsters diy

redline8500 · 05-13-2008, 08:50 PM

no thats ok ill wait even though me and my dad are in the glass business

05-13-2008, 05:27 PM	#1 (permalink)
redline8500 Senior Member Join Date: Aug 2007 Location: Phoenix Az Age: 21 Posts: 580 iTrader: 2 / 100%	polyurathane bushings I was curious if anyone made these for our cars. I was under my car yesterday cause my flex broke on my dcrh and I know its from going to the strip, anyways i noticed that the rear motor mount is broke and that the front ones had seen some serious stress thus explaining the broke flex. Does anyone make solid or polys for our cars, specifically motor mounts?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about my Bushings I purchased	tukai	CorSport	16	11-28-2007 12:39 PM
Aftermarket Bushings?	SPORT injected	Suspension and Brakes	0	08-24-2007 03:18 PM
got the bushings	honda06si	CorSport	12	11-19-2006 01:01 AM
where are the bushings	honda06si	CorSport	18	11-14-2006 09:38 AM

05-13-2008, 05:34 PM	#2 (permalink)
mike_si_29 Senior Member Join Date: Jan 2007 Location: Thousand Oaks, CA Posts: 350 Mike iTrader: 4 / 100%	Innovative motor mounts are suppose to come out soon. I drove my car there twice already. It was about 1.5 weeks ago. I will probably gonna go there at the end of this week so they can try out their final product. Brian told me they sent final mounts for powder coating... so i guess they should be out soon

05-13-2008, 05:48 PM	#3 (permalink)
redline8500 Senior Member Join Date: Aug 2007 Location: Phoenix Az Age: 21 Posts: 580 iTrader: 2 / 100%	Sweet cause i need them. Are they solid or poly?

05-13-2008, 05:55 PM	#4 (permalink)
mitsukaiSI Senior Member Join Date: Jan 2008 Posts: 1,542 Mike iTrader: 1 / 100%	i REALLY want solid but id settle for poly till solids are out . . . that scares me alot that you brok a mount

05-13-2008, 05:58 PM	#5 (permalink)
redline8500 Senior Member Join Date: Aug 2007 Location: Phoenix Az Age: 21 Posts: 580 iTrader: 2 / 100%	yeah go look at yours the one farthest back from the radiator, on the bottom of the car, the little one its torn right in half on mine

05-13-2008, 06:00 PM	#6 (permalink)
mike_si_29 Senior Member Join Date: Jan 2007 Location: Thousand Oaks, CA Posts: 350 Mike iTrader: 4 / 100%	They are tapered polyurethane. You can check out their website, it will give you some idea. I dont know how final product gonna look but i bet something similar: http://www.innovativemounts.com/

05-13-2008, 08:21 PM	#7 (permalink)
Ihockey1 Senior Member Join Date: Nov 2007 Location: Dublin,Oh Posts: 173 Sagar iTrader: 3 / 100%	you could also inject the stock ones with window weld for 14 dollars, following blueroadsters diy

05-13-2008, 08:50 PM	#8 (permalink)
redline8500 Senior Member Join Date: Aug 2007 Location: Phoenix Az Age: 21 Posts: 580 iTrader: 2 / 100%	no thats ok ill wait even though me and my dad are in the glass business