Fujita SRI and skunk2 70mm

BBQXXX · 05-13-2008, 02:26 AM

Hey, im new to this site but have been using it for info for a while. I have a 08 NHBP fg2. I have done some searching for my first mods and decided to go with fujita SRI and skunk2 70mm. (and skunk2 shift knob) I have tried searching forums to see if anyone has same combo or anything but didn't find anything. So any one here have this same combo? Or anyones opinions on either would be much appreciated! Or if you would recommend different I/E. Sorry if this is repost.

I Vtec, do you? · 05-13-2008, 02:52 AM

All you really need to know is it's going to be loud. If that's what you want, you made a good choice lol

BBQXXX · 05-13-2008, 02:56 AM

Well I do want it to be louder... i have herd that the skunk2 is the loudest but the sound clips i have herd from it i have loved. But i didnt find one with both just one or the other. My biggest thing is i want it to sound deep. I hate fart can rice sound. Anyone had any cop trouble?

Micah · 05-13-2008, 03:00 AM

i havent had cop trouble...and yes this exhaust is deep....if you like the vids, you will love it in person

BBQXXX · 05-13-2008, 03:05 AM

Quote:

Originally Posted by Micah

i havent had cop trouble...and yes this exhaust is deep....if you like the vids, you will love it in person

Micah did you install yourself? if so how was it? everything fit fine? no noise or rattling? Also did you actually notice a power increase like people say? Good to here its deep though! Wish I could see one in person...

Micah · 05-13-2008, 03:13 AM

no installs for me...the only thing that rattle is/are the hooks on the tip of the exhaust (unless skunk2 fixed that) and the change in my little "change holder"

BBQXXX · 05-13-2008, 03:23 AM

Anyone who has installed the skunk2 or fujita have any tips or any advice?

I Vtec, do you? · 05-13-2008, 03:24 AM

Leave the stock intake plumbing in

Micah · 05-13-2008, 03:25 AM

wait till your stock exhaust is cool before touching...believe it or not...its hot!! TRUST ME

BBQXXX · 05-13-2008, 03:32 AM

Yeah so one of the things i have never installed is a intake... Is it difficult? I was planning on it being a pretty simple install... So why use stock plumbing?

Ha reminds me of a time a friend forgot to let his engine cool down before adding coolent!

I Vtec, do you? · 05-13-2008, 03:36 AM

No it seems fairly easy actually. I just recommend keeping the stock tubing since it'll be easier to go back to stock later on

BBQXXX · 05-13-2008, 04:32 AM

Anybody have same combo? Or even anyone with fujita please let me know how you like it, want to hopefully order this soon and want to make sure i make the right decision.

I Vtec, do you? · 05-13-2008, 04:44 AM

Best SRi on the market imo

***solidust*** · 05-13-2008, 06:09 AM

get tanabe medallion with a header

BTRobertson · 05-13-2008, 09:25 AM

Quote:

Originally Posted by BBQXXX

Hey, im new to this site but have been using it for info for a while. I have a 08 NHBP fg2. I have done some searching for my first mods and decided to go with fujita SRI and skunk2 70mm. (and skunk2 shift knob) I have tried searching forums to see if anyone has same combo or anything but didn't find anything. So any one here have this same combo? Or anyones opinions on either would be much appreciated! Or if you would recommend different I/E. Sorry if this is repost.

I have the FA5 NHBP 07 Si and have the same exact combo you have, except I have the JDM FD2 shift knob and boot.

The combo is amazing, sounds great (has a silencer if it gets too loud for ya), and produces power hands down. I had mine dyno'd and I gained 20whp with those two mods (170 stock run; 190.4 after mods installed same day, same dyno).

You won't be disappointed bro. And yes, the Fujita SRI, in my opinion, is the best on the market. People make homemade stuff all the time, but if you want a great product out of the box for $200, the F5 cannot be beat. PM me if you have questions.

07SI FTW · 05-13-2008, 09:29 AM

i have a k&n with a skunk and love the combo. the exhaust is def loud and it is deep. i had to cut about 1/4 of an inch off the end of the hanger(closest to the canister) to make sure it did not rattle.

***solidust*** · 05-13-2008, 02:42 PM

20 whp eh?

BTRobertson · 05-13-2008, 02:46 PM

Yeah, peak. My car dyno'd at 170 stock, though, where I've seen other stock Sis dyno at 174 max. So that's a 16whp gain if you go by that one. The shop I go to is a performance shop and we made 9 pulls of my car - 19-20whp consistently over stock, 20 being the highest peak run (actually closer to 21 because my stock was like 169.76 and the highest peak was 190.16 or something like that). Hey, I don't go by dynos when it comes to driving the car, but it's nice to see the mods working so well on the car. I want to re-dyno the car with the reflash and the TBS/Gs installed - I haven't done that yet. I'm hoping to push 195whp with it. The header would make the biggest difference at this point, but it's 'spensive.

rws381 · 05-13-2008, 04:56 PM

I don't have the Skunk 2 exhaust (have Vibrant) but I do have a Fujita SRI. I have to say that I have been pretty happy with it. Sometimes it makes a tingy whistling sound at part throttle that I'm not thrilled with, but whatever. I'm not too great at all with working on cars but the install was super easy, you don't really need the crappy instructions it comes with. Just take the old stuff out ant put the new in. Good luck and enjoy!

***xrs54*** · 05-13-2008, 05:06 PM

wow, BTRobertson, thats pretty good with just those 2 mods. what are you running now??

anyway...back to topic...

i don't have an f5 or even an si for that matter, but from all that i've read on this site about that combo has been positive! so i think you're making the good choice.

05-13-2008, 02:26 AM	#1 (permalink)
BBQXXX Member Join Date: May 2008 Posts: 57 iTrader: 0 / 0%	Fujita SRI and skunk2 70mm Hey, im new to this site but have been using it for info for a while. I have a 08 NHBP fg2. I have done some searching for my first mods and decided to go with fujita SRI and skunk2 70mm. (and skunk2 shift knob) I have tried searching forums to see if anyone has same combo or anything but didn't find anything. So any one here have this same combo? Or anyones opinions on either would be much appreciated! Or if you would recommend different I/E. Sorry if this is repost.

05-13-2008, 03:32 AM	#10 (permalink)
BBQXXX Member Join Date: May 2008 Posts: 57 iTrader: 0 / 0%	Yeah so one of the things i have never installed is a intake... Is it difficult? I was planning on it being a pretty simple install... So why use stock plumbing? Ha reminds me of a time a friend forgot to let his engine cool down before adding coolent! Last edited by BBQXXX; 05-13-2008 at 03:33 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
skunk2 70mm	siracing17	Civic SI	2	05-11-2008 12:05 AM
07 Si Sedan - Fujita F5 SRI + Skunk2 70mm CB exhaust	BTRobertson	Bolt-Ons And All-Motor	13	02-21-2008 10:08 AM
Just put on my skunk2 70mm!!!!!!!	throwtheanchor	Bolt-Ons And All-Motor	3	09-13-2007 10:44 PM
where to get it? skunk2 70mm	purvertedmunk	Bolt-Ons And All-Motor	2	09-05-2007 11:39 AM

05-13-2008, 02:52 AM	#2 (permalink)
I Vtec, do you? Senior Member Join Date: Jan 2007 Location: mn Posts: 7,289 iTrader: 7 / 100%	All you really need to know is it's going to be loud. If that's what you want, you made a good choice lol

05-13-2008, 02:56 AM	#3 (permalink)
BBQXXX Member Join Date: May 2008 Posts: 57 iTrader: 0 / 0%	Well I do want it to be louder... i have herd that the skunk2 is the loudest but the sound clips i have herd from it i have loved. But i didnt find one with both just one or the other. My biggest thing is i want it to sound deep. I hate fart can rice sound. Anyone had any cop trouble?

05-13-2008, 03:00 AM	#4 (permalink)
Micah Senior Member Join Date: Oct 2007 Location: Pensacola, FL member#12 Age: 19 Posts: 4,036 micah iTrader: 1 / 100%	i havent had cop trouble...and yes this exhaust is deep....if you like the vids, you will love it in person

05-13-2008, 03:13 AM	#6 (permalink)
Micah Senior Member Join Date: Oct 2007 Location: Pensacola, FL member#12 Age: 19 Posts: 4,036 micah iTrader: 1 / 100%	no installs for me...the only thing that rattle is/are the hooks on the tip of the exhaust (unless skunk2 fixed that) and the change in my little "change holder"

05-13-2008, 03:23 AM	#7 (permalink)
BBQXXX Member Join Date: May 2008 Posts: 57 iTrader: 0 / 0%	Anyone who has installed the skunk2 or fujita have any tips or any advice?

05-13-2008, 03:24 AM	#8 (permalink)
I Vtec, do you? Senior Member Join Date: Jan 2007 Location: mn Posts: 7,289 iTrader: 7 / 100%	Leave the stock intake plumbing in

05-13-2008, 03:25 AM	#9 (permalink)
Micah Senior Member Join Date: Oct 2007 Location: Pensacola, FL member#12 Age: 19 Posts: 4,036 micah iTrader: 1 / 100%	wait till your stock exhaust is cool before touching...believe it or not...its hot!! TRUST ME

05-13-2008, 03:36 AM	#11 (permalink)
I Vtec, do you? Senior Member Join Date: Jan 2007 Location: mn Posts: 7,289 iTrader: 7 / 100%	No it seems fairly easy actually. I just recommend keeping the stock tubing since it'll be easier to go back to stock later on

05-13-2008, 04:32 AM	#12 (permalink)
BBQXXX Member Join Date: May 2008 Posts: 57 iTrader: 0 / 0%	Anybody have same combo? Or even anyone with fujita please let me know how you like it, want to hopefully order this soon and want to make sure i make the right decision.

05-13-2008, 04:44 AM	#13 (permalink)
I Vtec, do you? Senior Member Join Date: Jan 2007 Location: mn Posts: 7,289 iTrader: 7 / 100%	Best SRi on the market imo

05-13-2008, 09:29 AM	#16 (permalink)
07SI FTW Senior Member Join Date: Nov 2007 Location: Chi-Town Burbs, Illinois Age: 20 Posts: 200 Shaun iTrader: 0 / 0%	i have a k&n with a skunk and love the combo. the exhaust is def loud and it is deep. i had to cut about 1/4 of an inch off the end of the hanger(closest to the canister) to make sure it did not rattle.

05-13-2008, 02:46 PM	#18 (permalink)
BTRobertson Senior Member Join Date: Jun 2007 Location: Pittsburgh, PA Age: 31 Posts: 631 B.T. Robertson iTrader: 0 / 0%	Yeah, peak. My car dyno'd at 170 stock, though, where I've seen other stock Sis dyno at 174 max. So that's a 16whp gain if you go by that one. The shop I go to is a performance shop and we made 9 pulls of my car - 19-20whp consistently over stock, 20 being the highest peak run (actually closer to 21 because my stock was like 169.76 and the highest peak was 190.16 or something like that). Hey, I don't go by dynos when it comes to driving the car, but it's nice to see the mods working so well on the car. I want to re-dyno the car with the reflash and the TBS/Gs installed - I haven't done that yet. I'm hoping to push 195whp with it. The header would make the biggest difference at this point, but it's 'spensive.

05-13-2008, 04:56 PM	#19 (permalink)
rws381 Junior Member Join Date: Apr 2007 Location: Pennsylvania Age: 25 Posts: 21 Rob iTrader: 0 / 0%	I don't have the Skunk 2 exhaust (have Vibrant) but I do have a Fujita SRI. I have to say that I have been pretty happy with it. Sometimes it makes a tingy whistling sound at part throttle that I'm not thrilled with, but whatever. I'm not too great at all with working on cars but the install was super easy, you don't really need the crappy instructions it comes with. Just take the old stuff out ant put the new in. Good luck and enjoy!