looking at p2r spacer/ power package

[FijiFA5]

im not exactly sure what its called but it had the TB spacer and amongst other things. i tried searching too many things came up so here is what i would like to know. 1. what is the best deal out for the power package 2. where can i find this 3. who has this installed and do you have any pictures, 4. what kind of gains am i looking at? 5. please elaborate on anything else i forgot to mention that you think would be helpful. thanks guys!

[Rolow]

Your looking for the P2R throttle body spacer.

P2R Throttle Body Spacer FAQ's

[Rolow]

http://www.allversionperformance. com/p2rpkg

and Corsport a site sponsor
New 06+ Civic Si P2R Throttle Body Spacer

[FijiFA5]

i read somewhere a while ago that they had a IM spacer/ or gasket of some sort to cool down engine temps possibly some sort of gain that was included in this package?

[FijiFA5]

avp link didnt work.

[Grizam303]

Originally Posted by FijiFA5

i read somewhere a while ago that they had a IM spacer/ or gasket of some sort to cool down engine temps possibly some sort of gain that was included in this package?

I think you're thinking about the intake manifold gasket (IMG), which fits between the engine and the intake manifold. I have seen these for sale at corsport and hondata. I haven't seen a dyno that evaluates only this part, but in theory, it should make gains due to a lower intake manifold temperature.

The throttle body spacer (TBS) and accompanying gaskets go between the throttle body and the intake manifold. Having the spacer behind the throttle body effectively increases the size of the intake manifold.

Air -> intake -> throttle body -> intake manifold -> engine.
Where stuff goes:................| TBS.................| IMG

[FijiFA5]

sweet. so p2r spacer plus gaskets and IMG should be a good combo?

[Rolow]

http://www.allversionperformance. com/p2rpkg
ok wont work just take the space out
it has 2 TB gaskets 1 TB spacer and 1 IM gasket

[Grizam303]

Originally Posted by Grizam303

I haven't seen a dyno that evaluates only this part, but in theory, it should make gains due to a lower intake manifold temperature.

Trick. Yes I have.

keeping track ... mods + dyno numbers

Measurable, repeatable performance gains, but likely not noticeable.

[Grizam303]

Originally Posted by FijiFA5

sweet. so p2r spacer plus gaskets and IMG should be a good combo?

The IMG looks fairly complicated to install, albeit not very difficult. I have not installed it, but qshooter has a DIY under the bolt on DIY section.

[Szwaboski]

I think i know what your talking about, SCtuned had the package for like 155 or something

[FijiFA5]

yeah! thats what i was looking for. that package deal for 160 awesome. anybody find anything lower? anybody have proof of gains with just the spacer and IMG?

[jdmstylesi]

check out Greddy, TEIN, JDM Honda, APEXi, HKS, SKUNK2, BUDDYCLUB, GOLDEN EAGLE, NEUSPEED

I have EVERYTHING in stock!!

[Grizam303]

Originally Posted by FijiFA5

yeah! thats what i was looking for. that package deal for 160 awesome. anybody find anything lower? anybody have proof of gains with just the spacer and IMG?

I posted the link above, on post number 9. It compares stock, TBS, TBS + IMG, TBS + IMG + CAI.