T1R Air Conduct Box

***AJR Joey*** · 05-02-2008, 12:41 AM

Here is the long awaited Air Conduct Box the 8thgens have been waiting for! Here is it installed in an FG and how it looks like. We should have these up for sale soon because everything went really well.

Enjoy.

***NitrousG35*** · 05-02-2008, 12:44 AM

I have to admit that it one good looking intake system. If I weren't going with a cowl induction system, I might have to jump on this instead. Looks well engineered and well thought out. Should make a nice performance gain, plus, it has some bling as well.

hapaboy310 · 05-02-2008, 12:45 AM

holy! sh*t, nice! what about the place for the maf? i see it on the pic in the engine bay but not the pic of just the product?

Xenin · 05-02-2008, 12:45 AM

finally!

are the holes going to be predrilled for the MAF?

hapaboy310 · 05-02-2008, 12:48 AM

Quote:

Originally Posted by Xenin

finally!

are the holes going to be predrilled for the MAF?

that's what i was wondering

***AJR Joey*** · 05-02-2008, 01:01 AM

Quote:

Originally Posted by NitrousG35

I have to admit that it one good looking intake system. If I weren't going with a cowl induction system, I might have to jump on this instead. Looks well engineered and well thought out. Should make a nice performance gain, plus, it has some bling as well.

Thank you for the compliment. We have spent a lot of time and R&D to get this product where it is today. It will have good gains, we will hope to get a dyno result asap if we can. If not we can get out customers to dyno it with the parts in his car, he also has parts from us T1R 70RR, T1R Power Header, and see if he gets this also. This will let everyone know the results of the T1R combo.

Quote:

Originally Posted by hapaboy310

holy! sh*t, nice! what about the place for the maf? i see it on the pic in the engine bay but not the pic of just the product?

There is a maf (all comes with MAF), in the 2nd picture. The maf sits on top just like the stock box.

Quote:

Originally Posted by Xenin

finally!

are the holes going to be predrilled for the MAF?

Yes, the MAF section will be all pre-drilled. Its plug in play baby, bolt-on!

SIg · 05-02-2008, 01:04 AM

i might've missed this but do you know about how much it's going to cost? the intake looks great!

Xenin · 05-02-2008, 01:05 AM

sweet!

i'll be getting this when it comes out. my plan is to get either the 63S or 70R catback to with this at some point. no race header though, would like to stay emission safe.

***BlueSi4*** · 05-02-2008, 01:07 AM

Hmmm very interesting and it looks good too.

Keep us updated

Gr3y Goose · 05-02-2008, 01:08 AM

lol Joey. looks good though...im guessing its like 350-400 knowing t1r trends. no flame though it looks like a solid product

chugiboi · 05-02-2008, 01:13 AM

is there any bracket to hold the air duct parts on the Third pictures? btw, that's a nice new intake system, similar to the mugen one.

***AJR Joey*** · 05-02-2008, 01:14 AM

Quote:

Originally Posted by SIg

i might've missed this but do you know about how much it's going to cost? the intake looks great!

I will try to find out a confirm price for everyone tomorrow. Since we are closed, I am helping everyone out on my spare time at home.

Quote:

Originally Posted by Xenin

sweet!

i'll be getting this when it comes out. my plan is to get either the 63S or 70R catback to with this at some point. no race header though, would like to stay emission safe.

Let us know when you are ready, as I stated before the intake will be ready to purchase by the end of this month. Will let everyone know for sure when you can.

Quote:

Originally Posted by BlueSi4

Hmmm very interesting and it looks good too.

Keep us updated

Thank You, I will keep everyone up to date for sure. Since the last thread someone has made this is the actual pictures that we have.

Impreza_22B · 05-02-2008, 01:17 AM

NICE. Do want.

How's the throttle response in lower&mid range?
The OE response is kinda dead due to the DBW, i hope this box would help make things a bit more alive.

Xenin · 05-02-2008, 01:18 AM

Quote:

my only gripe is that intake duct is close to the frame of the car and will vibrate too much hitting the frame.

i'm thinking some weather sealing foam might do the trick to stop it from damaging the intake duct.

chugiboi · 05-02-2008, 01:20 AM

Quote:

Originally Posted by Impreza_22B

NICE. Do want.

How's the throttle response in lower&mid range?
The OE response is kinda dead due to the DBW, i hope this box would help make things a bit more alive.

i remember modifying my stock intake into the homemade icebox and the throttle response improve a bit, so this one will give a good throttle response.

chugiboi · 05-02-2008, 01:22 AM

Quote:

Originally Posted by Xenin

my only gripe is that intake duct is close to the frame of the car and will vibrate too much hitting the frame.

i'm thinking some weather sealing foam might do the trick to stop it from damaging the intake duct.

my concern is there's no brackets holding on to the air duct though.

jackolee · 05-02-2008, 01:24 AM

interesting, are you going to have dynos?

Xenin · 05-02-2008, 01:24 AM

Quote:

Originally Posted by chugiboi

my concern is there's no brackets holding on to the air duct though.

yeah i'm wondering how well it will stay in place.

***AJR Joey*** · 05-02-2008, 01:24 AM

Quote:

Originally Posted by chugiboi

is there any bracket to hold the air duct parts on the Third pictures? btw, that's a nice new intake system, similar to the mugen one.

Actually, you do not really need to worry about, it sits pretty firmly.

Quote:

Originally Posted by Impreza_22B

NICE. Do want.

How's the throttle response in lower&mid range?
The OE response is kinda dead due to the DBW, i hope this box would help make things a bit more alive.

The response has improved over stock and you will not get the jerky low RPM like the Intake that are out there in the market. Throttle response are improved from lower to mid range. This wil help the DBW to be better than before.

Quote:

Originally Posted by Xenin

my only gripe is that intake duct is close to the frame of the car and will vibrate too much hitting the frame.

i'm thinking some weather sealing foam might do the trick to stop it from damaging the intake duct.

It is not that close as it seem, maybe its because of the picture. It sits pretty firmly and you do not worry about it vibrating. If you want to be extra precaution you can do the foam trick, but you really do not need to do that.

***AJR Joey*** · 05-02-2008, 01:26 AM

Quote:

Originally Posted by chugiboi

my concern is there's no brackets holding on to the air duct though.

Do not worry, we R&D it and we have no issues with the vibrating noise that it rubbs. You guys should not be worried about that at all because it sits pretty firm and when we test drove it there was no vibrating noises.

Quote:

Originally Posted by jackolee

interesting, are you going to have dynos?

We hope to get a dyno soon.

05-02-2008, 12:41 AM	#1 (permalink)
*AJR Joey* 8thcivic Sponsor Join Date: Feb 2008 Posts: 187 iTrader: 2 / 100%	T1R Air Conduct Box Here is the long awaited Air Conduct Box the 8thgens have been waiting for! Here is it installed in an FG and how it looks like. We should have these up for sale soon because everything went really well. Enjoy. __________________ A&J Racing International TEL: (604)279-0329 URL: http://www.aj-racing.com

05-02-2008, 12:44 AM	#2 (permalink)
*NitrousG35* Mr. Cowl Induction Join Date: May 2007 Location: To Infiniti and beyond... Posts: 7,200 Call me Bill iTrader: 1 / 100%	I have to admit that it one good looking intake system. If I weren't going with a cowl induction system, I might have to jump on this instead. Looks well engineered and well thought out. Should make a nice performance gain, plus, it has some bling as well. __________________

05-02-2008, 01:07 AM	#9 (permalink)
*BlueSi4* Skunk2 Airlines Join Date: Apr 2007 Location: Westchester, NY Age: 20 Posts: 17,913 Oriol iTrader: 5 / 100%	Hmmm very interesting and it looks good too. Keep us updated __________________ "The Juice Is Worth The Squeeze" My Car - *Eibach Sportlines/Skunk2 Gold Camber Kit/Skunk2 70mm/OZ Superleggera/Pioneer Avic D3/DC RH*/

05-02-2008, 12:45 AM	#3 (permalink)
hapaboy310 Senior Member Join Date: May 2007 Location: south bay, cali Posts: 231 iTrader: 0 / 0%	holy! sh*t, nice! what about the place for the maf? i see it on the pic in the engine bay but not the pic of just the product?

05-02-2008, 12:45 AM	#4 (permalink)
Xenin Senior Member Join Date: Jun 2005 Location: Brampton Age: 25 Posts: 1,288 iTrader: 0 / 0%	finally! are the holes going to be predrilled for the MAF?

05-02-2008, 01:04 AM	#7 (permalink)
SIg Senior Member Join Date: Jan 2007 Posts: 484 iTrader: 0 / 0%	i might've missed this but do you know about how much it's going to cost? the intake looks great!

05-02-2008, 01:05 AM	#8 (permalink)
Xenin Senior Member Join Date: Jun 2005 Location: Brampton Age: 25 Posts: 1,288 iTrader: 0 / 0%	sweet! i'll be getting this when it comes out. my plan is to get either the 63S or 70R catback to with this at some point. no race header though, would like to stay emission safe.

05-02-2008, 01:08 AM	#10 (permalink)
Gr3y Goose Senior Member Join Date: Jan 2007 Location: Long Island, Nassau C Age: 21 Posts: 2,100 John/Goose iTrader: 3 / 100%	lol Joey. looks good though...im guessing its like 350-400 knowing t1r trends. no flame though it looks like a solid product

05-02-2008, 01:13 AM	#11 (permalink)
chugiboi Senior Member Join Date: Aug 2007 Location: stockton ca Age: 21 Posts: 1,819 chue hang iTrader: 0 / 0%	is there any bracket to hold the air duct parts on the Third pictures? btw, that's a nice new intake system, similar to the mugen one.

05-02-2008, 01:17 AM	#13 (permalink)
Impreza_22B Member Join Date: Jun 2005 Location: Toronto, ON Age: 21 Posts: 39 iTrader: 2 / 100%	NICE. Do want. How's the throttle response in lower&mid range? The OE response is kinda dead due to the DBW, i hope this box would help make things a bit more alive.

05-02-2008, 01:24 AM	#17 (permalink)
jackolee Senior Member Join Date: Jun 2007 Location: Tennessee Age: 19 Posts: 2,192 iTrader: 0 / 0%	interesting, are you going to have dynos?

Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
07jdmsi