My Greddy Ti-C Review

Asif22 · 03-10-2008, 05:14 PM

I ordered the exhaust from Corsport. This was my first time dealing with them and it was good. They were very clear and gave me a tracking number and I got my exhaust in a little less than a week. Very good people, if you want to order parts go to them.

As for the exhaust I opened it up and everything seemed very nice. Everything was bubble wrapped and appeared to be in good condition. The resonator and muffler are polished and the rest of the piping is not. There was a lot of scratches on the piping it self. It looked kind of like somebody took a dremel to the piping and ground scratches in it. There is also a few pin like dents in the piping. None of this was really a big deal to me as long as it wasn't on the resonator or muffler. The piping wasn't damaged really just cosmetic things..Maybe this is normal since that part isn't polished...I don't know.

As far as sound I don't have the silencer in and I think it sounds great. It is very deep and has a rumbling when you let off the throttle. It isn't too loud but it's not too quiet either. When you are accelerating it is kind of loud but in a good way. When you are at a steady RPM you can barley hear it.

As for performance I can't tell that much...It feels like it pulls harder in the upper RPM range but I may only think this because it is loud.

I got it installed at Honda and it seems like it fit very well. You also get a Greddy License Plate Frame and a sticker. I am satisfied with this exhaust. I wish the piping wasn't scratched but it's not a big deal to me as long as there is no real damage or scratches on the resonator or muffler.

Asif22 · 03-11-2008, 02:53 PM

57 views not response? damn lol

dnbsi · 03-11-2008, 02:57 PM

vids please!

NcSi · 03-11-2008, 03:00 PM

why'd u get it installed at honda? It so damn easy to do. How much they take out of your pocket?

Asif22 · 03-11-2008, 03:16 PM

^ I don't have a a lift or jack stands...I just turned 18 so I live with my dad...He wants everything possible to be done at Honda. I know it's an easy job though. Sc Tuned said install and 2 dyno runs for 100 bucks which is a good price to me but again my dad...It cost 120 bucks, and I'll have vids up sooon

***FijiPhil*** · 03-11-2008, 03:21 PM

best looking exhaust on the market. i love it. congrats.

NcSi · 03-11-2008, 03:27 PM

yea i loved it on my fg2 but im gonna prob get lsd for the sidan

Asif22 · 03-11-2008, 04:02 PM

Thanks for the responses everyone, I kind of wish they had a 70mm version but o well....If anyone has or knows where I can find dyno results or a stock Si then with the Ti-C please let me know I can't find it anywhere.

***infinite0216*** · 03-11-2008, 04:05 PM

looks good. is the entire system one piece? looks like it from ur pics

NcSi · 03-11-2008, 04:14 PM

its maybe a 3-5 whp gain

Jonfg2 · 03-11-2008, 04:17 PM

If you have just the cat back its not gonna give you much if any. I got this exhaust w/ the dcrh behind it and thats when you can se an increase of hp. Not trying to steal your thread but here's a vid of my setup at the track.

Video of moroso 2-29-08 - Photobucket - Video and Image Hosting

8yourv8 · 03-11-2008, 04:19 PM

Quote:

Originally Posted by Jonfg2

Video of moroso 2-29-08 - Photobucket - Video and Image Hosting

sounds and looks good

***finallymanual*** · 03-11-2008, 04:24 PM

i love this exhaust but only if the pipe doesn't hang so low

NcSi · 03-11-2008, 04:36 PM

mine was loud as hell with the dcrh

Asif22 · 03-11-2008, 08:45 PM

Quote:

Originally Posted by infinite0216

looks good. is the entire system one piece? looks like it from ur pics

I just put the pieces together for the picture. It is a 2 piece exhaust...

***blacksi2007*** · 03-11-2008, 09:06 PM

ive had mine for a year. get used to droning!

Show Stoppa FG1 · 03-11-2008, 09:16 PM

so for the cash, u guys think this is da best out of all of dem?

MutantCheese · 03-11-2008, 09:45 PM

I don't like that the tip is screwed on and the entire muffler is angle up in the back. Otherwise looks good.

Show Stoppa FG1 · 03-11-2008, 09:53 PM

but is it the best?

Asif22 · 03-11-2008, 10:15 PM

^ What is your idea of good. It all comes down to you. I was originally going to get skunk2 because of the 70mm but I don't like the tip at all. So I love the way this looks and it feels more peppy up top. It is a great exhaust to me as a package. But I am pretty sure the skunk2 gives more up top

03-10-2008, 05:14 PM	#1 (permalink)
Asif22 Senior Member Join Date: Jul 2007 Location: United States Posts: 2,004 Mohamed El-Mubaslat iTrader: 0 / 0%	My Greddy Ti-C Review I ordered the exhaust from Corsport. This was my first time dealing with them and it was good. They were very clear and gave me a tracking number and I got my exhaust in a little less than a week. Very good people, if you want to order parts go to them. As for the exhaust I opened it up and everything seemed very nice. Everything was bubble wrapped and appeared to be in good condition. The resonator and muffler are polished and the rest of the piping is not. There was a lot of scratches on the piping it self. It looked kind of like somebody took a dremel to the piping and ground scratches in it. There is also a few pin like dents in the piping. None of this was really a big deal to me as long as it wasn't on the resonator or muffler. The piping wasn't damaged really just cosmetic things..Maybe this is normal since that part isn't polished...I don't know. As far as sound I don't have the silencer in and I think it sounds great. It is very deep and has a rumbling when you let off the throttle. It isn't too loud but it's not too quiet either. When you are accelerating it is kind of loud but in a good way. When you are at a steady RPM you can barley hear it. As for performance I can't tell that much...It feels like it pulls harder in the upper RPM range but I may only think this because it is loud. I got it installed at Honda and it seems like it fit very well. You also get a Greddy License Plate Frame and a sticker. I am satisfied with this exhaust. I wish the piping wasn't scratched but it's not a big deal to me as long as there is no real damage or scratches on the resonator or muffler.

03-11-2008, 03:21 PM	#6 (permalink)
*FijiPhil* ZILLLAAAAAA!!!!!!!!!! Join Date: Jun 2007 Location: Tampa Age: 19 Posts: 2,423 Phil iTrader: 0 / 0%	best looking exhaust on the market. i love it. congrats. __________________ FG Squad Member #382 Tampa Crew Member #3 15% Tint///JDM FD2 Shift knob///JDM Red H emblems///Injen CAI Join the forum where you can exercise freedom of speech and say what you want -----------> http://tampastreetracing.lefora.com/forum/

03-11-2008, 09:06 PM	#16 (permalink)
*blacksi2007* I have a Honda lawnmower Join Date: Jan 2008 Location: Savannah GA Posts: 258 Colby iTrader: 4 / 100%	ive had mine for a year. get used to droning! __________________ ATLsquad#37 FGcrew#37

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Greddy TiC installed, small review (picture heavy)	CANMAN	Bolt-Ons And All-Motor	89	05-01-2008 01:36 PM
Greddy Garage Sale and Performance Festival	chris_lum	California South	151	02-25-2008 03:54 AM
Greddy Evo2 on FG2.. my review	shutter13	Bolt-Ons And All-Motor	13	10-30-2007 08:54 PM
Greddy E-Manage Ultimate Review	tolgaSI	Bolt-Ons And All-Motor	0	09-18-2007 07:04 PM
GReddy Is In Search For A Turbo Si For Prototype	Raging	Forced Induction And Nitrous	0	08-17-2007 04:54 PM

03-11-2008, 02:53 PM	#2 (permalink)
Asif22 Senior Member Join Date: Jul 2007 Location: United States Posts: 2,004 Mohamed El-Mubaslat iTrader: 0 / 0%	57 views not response? damn lol

03-11-2008, 02:57 PM	#3 (permalink)
dnbsi Senior Member Join Date: Apr 2007 Posts: 955 iTrader: 0 / 0%	vids please!

03-11-2008, 03:00 PM	#4 (permalink)
NcSi Senior Member Join Date: Jun 2006 Location: Willow Springs, NC Age: 22 Posts: 2,909 Bryan iTrader: 3 / 100%	why'd u get it installed at honda? It so damn easy to do. How much they take out of your pocket?

03-11-2008, 03:16 PM	#5 (permalink)
Asif22 Senior Member Join Date: Jul 2007 Location: United States Posts: 2,004 Mohamed El-Mubaslat iTrader: 0 / 0%	^ I don't have a a lift or jack stands...I just turned 18 so I live with my dad...He wants everything possible to be done at Honda. I know it's an easy job though. Sc Tuned said install and 2 dyno runs for 100 bucks which is a good price to me but again my dad...It cost 120 bucks, and I'll have vids up sooon

03-11-2008, 03:27 PM	#7 (permalink)
NcSi Senior Member Join Date: Jun 2006 Location: Willow Springs, NC Age: 22 Posts: 2,909 Bryan iTrader: 3 / 100%	yea i loved it on my fg2 but im gonna prob get lsd for the sidan

03-11-2008, 04:02 PM	#8 (permalink)
Asif22 Senior Member Join Date: Jul 2007 Location: United States Posts: 2,004 Mohamed El-Mubaslat iTrader: 0 / 0%	Thanks for the responses everyone, I kind of wish they had a 70mm version but o well....If anyone has or knows where I can find dyno results or a stock Si then with the Ti-C please let me know I can't find it anywhere.

03-11-2008, 04:05 PM	#9 (permalink)
*infinite0216* Sambos \| We the BEST! Join Date: Jan 2007 Location: Perris, CA Posts: 1,275 Andy iTrader: 11 / 100%	looks good. is the entire system one piece? looks like it from ur pics

03-11-2008, 04:14 PM	#10 (permalink)
NcSi Senior Member Join Date: Jun 2006 Location: Willow Springs, NC Age: 22 Posts: 2,909 Bryan iTrader: 3 / 100%	its maybe a 3-5 whp gain

03-11-2008, 04:17 PM	#11 (permalink)
Jonfg2 Member Join Date: Oct 2007 Location: south fl Posts: 68 iTrader: 0 / 0%	If you have just the cat back its not gonna give you much if any. I got this exhaust w/ the dcrh behind it and thats when you can se an increase of hp. Not trying to steal your thread but here's a vid of my setup at the track. Video of moroso 2-29-08 - Photobucket - Video and Image Hosting

03-11-2008, 04:24 PM	#13 (permalink)
*finallymanual* VIP Member Join Date: Dec 2007 Location: markham Posts: 483 iTrader: 0 / 0%	i love this exhaust but only if the pipe doesn't hang so low

03-11-2008, 04:36 PM	#14 (permalink)
NcSi Senior Member Join Date: Jun 2006 Location: Willow Springs, NC Age: 22 Posts: 2,909 Bryan iTrader: 3 / 100%	mine was loud as hell with the dcrh

03-11-2008, 09:16 PM	#17 (permalink)
Show Stoppa FG1 Senior Member Join Date: Feb 2008 Location: Spring Valley New York Age: 20 Posts: 221 Garrick Mundy iTrader: 0 / 0%	so for the cash, u guys think this is da best out of all of dem?

03-11-2008, 09:45 PM	#18 (permalink)
MutantCheese Senior Member Join Date: Aug 2006 Location: Edge of Insanity Age: 39 Posts: 3,088 '06 Si Coupe NBP Full HFP iTrader: 0 / 0%	I don't like that the tip is screwed on and the entire muffler is angle up in the back. Otherwise looks good.

03-11-2008, 09:53 PM	#19 (permalink)
Show Stoppa FG1 Senior Member Join Date: Feb 2008 Location: Spring Valley New York Age: 20 Posts: 221 Garrick Mundy iTrader: 0 / 0%	but is it the best?

03-11-2008, 10:15 PM	#20 (permalink)
Asif22 Senior Member Join Date: Jul 2007 Location: United States Posts: 2,004 Mohamed El-Mubaslat iTrader: 0 / 0%	^ What is your idea of good. It all comes down to you. I was originally going to get skunk2 because of the 70mm but I don't like the tip at all. So I love the way this looks and it feels more peppy up top. It is a great exhaust to me as a package. But I am pretty sure the skunk2 gives more up top