Angled Defouler

uknowuhateit · 03-03-2008, 08:23 PM

Where are you guys getting yours at? I have found a couple on some threads, but they are high.

***Excalibur*** · 03-03-2008, 09:14 PM

35 bucks is about what you will have to pay to get your hands on one unless you find one in the classifieds. I have strutking ones. Can't get them anymore. There is one right now for sale in a partout in the classifieds, but I think he's trying to sell it w/ the bcrh. If you want, you could try to talk him out of it. It's worth the dough.

uknowuhateit · 03-03-2008, 09:18 PM

For $35 i hope it works. Is there not just a 90degree angle piece at lowes or anything?

***Excalibur*** · 03-03-2008, 09:20 PM

Quote:

Originally Posted by uknowuhateit

For $35 i hope it works. Is there not just a 90degree angle piece at lowes or anything?

Yes, but you have to drill out the female end and retap it.

uknowuhateit · 03-03-2008, 09:32 PM

Well i already bought the two sparkplug defoulers from autozone and drilled the one your suppose to. With both of those and the 02 it hits the chassis. So if i get a 90 degree and throw it in the middle of those two i wouldn't have to drill or tap anything right?

***Excalibur*** · 03-03-2008, 09:41 PM

Quote:

Originally Posted by uknowuhateit

Well i already bought the two sparkplug defoulers from autozone and drilled the one your suppose to. With both of those and the 02 it hits the chassis. So if i get a 90 degree and throw it in the middle of those two i wouldn't have to drill or tap anything right?

You would still have to drill the angled piece on the female end b/c the threads going into it would still be the same size. The defouler pieces you're talking about have the same sized male ends as the threads on the 02 sensor. If you used the one from home depot, you would still have to put one of the defoulers on the female end anyways to keep the tip of the o2 sensor out of the bend.

***Excalibur*** · 03-03-2008, 09:45 PM

Here's what it looks like.
3/8 GALV 90 STREET ELBOW 5415518 - SHOP.COM

uknowuhateit · 03-03-2008, 09:46 PM

yeah that could work.

***NitrousG35*** · 03-03-2008, 10:14 PM

Currently, options are limited. You can get the Weapon R, which I have heard, is a lot longer than other angled defoulers. Price is $45. You can get the Vibrant piece, but you will need it welded onto the O2 bung. You can also call SCTuned as they said they will have their own angled defouler out very soon.

uknowuhateit · 03-03-2008, 10:19 PM

Probably going to look into making one. If not i might buy one. If not i'll just run with the check engin light on Hondata said with the reflash it might come on, so whatever.

cambodianricer · 07-04-2008, 05:35 PM

how does this even work?

***NitrousG35*** · 07-04-2008, 05:36 PM

Quote:

Originally Posted by cambodianricer

how does this even work?

Mother of all defouler threads...

2xSi · 07-04-2008, 05:52 PM

I have bought 2 from this guy @$25 shipped. I think he makes them....

'jcsdesigns2003@yahoo.com'

cambodianricer · 07-05-2008, 01:58 AM

Quote:

Originally Posted by NitrousG35

Mother of all defouler threads...

thanks!

03-03-2008, 08:23 PM	#1 (permalink)
uknowuhateit Senior Member Join Date: Jan 2008 Posts: 130 iTrader: 3 / 100%	Angled Defouler Where are you guys getting yours at? I have found a couple on some threads, but they are high.

03-03-2008, 10:14 PM	#9 (permalink)
*NitrousG35* Mr. Cowl Induction Join Date: May 2007 Location: To Infiniti and beyond... Posts: 8,907 Wild VTEC'n Bill iTrader: 1 / 100%	Currently, options are limited. You can get the Weapon R, which I have heard, is a lot longer than other angled defoulers. Price is $45. You can get the Vibrant piece, but you will need it welded onto the O2 bung. You can also call SCTuned as they said they will have their own angled defouler out very soon. __________________

07-04-2008, 05:52 PM	#13 (permalink)
2xSi Member Join Date: Jun 2008 Age: 51 Posts: 73 iTrader: 0 / 0%	I have bought 2 from this guy @$25 shipped. I think he makes them.... 'jcsdesigns2003@yahoo.com' Last edited by 2xSi; 07-04-2008 at 05:53 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BCRH and Defouler	palinekeki	Bolt-Ons And All-Motor	23	02-11-2008 08:41 PM
angled defouler	Akira27	Mechanical Problems & Technical Chat	3	12-29-2007 11:42 AM
BCRH installed yesterday with defouler... but	llckll	Bolt-Ons And All-Motor	21	10-18-2007 11:02 AM
Angled Defouler for BCRH	llckll	Bolt-Ons And All-Motor	1	09-30-2007 06:30 PM

03-03-2008, 09:14 PM	#2 (permalink)
*Excalibur* VIP Member Join Date: May 2007 Location: Converse, TX. Age: 25 Posts: 7,559 Jeremy iTrader: 22 / 100%	35 bucks is about what you will have to pay to get your hands on one unless you find one in the classifieds. I have strutking ones. Can't get them anymore. There is one right now for sale in a partout in the classifieds, but I think he's trying to sell it w/ the bcrh. If you want, you could try to talk him out of it. It's worth the dough.

03-03-2008, 09:18 PM	#3 (permalink)
uknowuhateit Senior Member Join Date: Jan 2008 Posts: 130 iTrader: 3 / 100%	For $35 i hope it works. Is there not just a 90degree angle piece at lowes or anything?

03-03-2008, 09:32 PM	#5 (permalink)
uknowuhateit Senior Member Join Date: Jan 2008 Posts: 130 iTrader: 3 / 100%	Well i already bought the two sparkplug defoulers from autozone and drilled the one your suppose to. With both of those and the 02 it hits the chassis. So if i get a 90 degree and throw it in the middle of those two i wouldn't have to drill or tap anything right?

03-03-2008, 09:45 PM	#7 (permalink)
*Excalibur* VIP Member Join Date: May 2007 Location: Converse, TX. Age: 25 Posts: 7,559 Jeremy iTrader: 22 / 100%	Here's what it looks like. 3/8 GALV 90 STREET ELBOW 5415518 - SHOP.COM

03-03-2008, 09:46 PM	#8 (permalink)
uknowuhateit Senior Member Join Date: Jan 2008 Posts: 130 iTrader: 3 / 100%	yeah that could work.

03-03-2008, 10:19 PM	#10 (permalink)
uknowuhateit Senior Member Join Date: Jan 2008 Posts: 130 iTrader: 3 / 100%	Probably going to look into making one. If not i might buy one. If not i'll just run with the check engin light on Hondata said with the reflash it might come on, so whatever.

07-04-2008, 05:35 PM	#11 (permalink)
cambodianricer Senior Member Join Date: Dec 2007 Location: Corona, Cali Posts: 2,178 Jason iTrader: 0 / 0%	how does this even work?